PMP220 TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

© TT Electronics plc General Note All data sheets are subject to change without notice. TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 ISS.2 20/07/2020 Page: 1 Description: The PMP220 series of AC/DC switching power supplies are for 200-220 watts of continuous output power. They are enclosed in a 94V-0 rated polycarbonate case with an inlet to mate with interchangeable cord for world-wide use. All models meet EN55011 and FCC class B emission limits, and are designed for medical applications. Features:

  • High Efficiency
  • Low ripple & noise
  • Overvoltage protection
  • Overcurrent protection
  • Over-temperature protection
  • 100% burn-in at full rated load
  • Standby consumption less than 0.5W
  • Compliant with CEC and ENERGY STAR efficiency level V requirements
  • Compliant with RoHS requirements
  • IEC 60601-1-2-4th Edition EMC Compliance Model1 Average Active Efficiency (typical) @115/230 Vac Output Class I1 Class II2 V1 Min Current3 Max. Current Tol. Ripple & Noise 4 Max Power PMP220-13-2 PMP220SF-13-2 19V 0.1A 10.53A ±5% 190mV 200W 87/87% PMP220-14 PMP220SF-14 24V 0.1A 9.17A ±5% 240mV 220W 90/92% PMP220-15 PMP220SF-15 28V 0.1A 7.86A ±5% 280mV 220W 90/92% PMP220-17 PMP220SF-17 36V 0.1A 6.11A ±5% 360mV 220W 90/92% NOTES: 1. Class I models are equipped with IEC320/C14 inlet. To order a model with C6 inlet, add “S” to the prefix, PMP220, of model number, e.g. PMP220S-12. 2. Class II models are equipped with IEC320/C8 inlet. To order a model with C18 inlet, change “SF” in the prefix of model number to “F”, e.g. PMP220F-12. 3. All models may be operated at no-load without damage. At no load, output voltage fluctuates beyond 5% due to the burst-mode operation of the control IC in them for energy saving. 4. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 47 μF electrolytic capacitor in parallel with a 0.1 μF ceramic capacitor across the output.

© TT Electronics plc General Note All data sheets are subject to change without notice. TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 ISS.2 20/07/2020 Page: 2 Specifications Safety Standards & EMC Specifications Safety Standard Approvals UL ES 60601-1, CSA C22.2 No. 60601-1 File No. E178020 TÜV EN 60601-1 EMI Standard EN55011, FCC & VCCI Class B conducted and radiated EMC Performance EN61000-3-2: Harmonic distortion, class A and D EN61000-3-3: Line flicker EN61000-4-2: ESD, ±15 KV air and ±8 KV contact EN61000-4-3: Radiated immunity, 10 V/m EN61000-4-4: Fast transient/burst, ±2 KV EN61000-4-5: Surge, ±1 KV diff., ±2 KV com EN61000-4-6: Conducted immunity, 10 Vrms EN61000-4-8: Magnetic field immunity, 30 A/m EN61000-4-11: Voltage dip immunity, 30% reduction for 500 ms, 100% reduction for 10 ms *Consult with TT Electronics for information on additional country safety approvals Input Specifications Input Voltage Range 90-264VAC Power Derating Derate from 100% at +40˚ C linearly to 50% at +60˚ C Input Frequency Range 47 to 63Hz Input Current 2.5A (rms) for 115 VAC or 1.2A (rms) for 230 VAC Earth Leakage Current 100 μA max. @ 264 VAC, 63 Hz Touch Current 100 μA max. @ 264 VAC, 63 Hz Output Specifications Ripple and Noise 1% peak to peak maximum Overvoltage Protection Set at 110% to 130% of its nominal output voltage Overcurrent Protection All models protected 110% to 120% of full load condition Transient Response Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 us after a 25% step load change Environmental Specifications Operating Temperature 0˚ C to +60˚ C (See Derating) Storage Temperature -20˚ C +80˚ C Relative Humidity 10% to 90% non-condensing Temperature Derating Derate from 100% at +40˚ C linearly to 50% at +60˚ C General Specifications Hold-up Time 12ms minimum at 100 VAC Turn on Delay Time 3s maximum at 100 VAC Power Factor 0.95 Typical Efficiency 87% minimum at 100 VAC or 240 VAC Line Regulation ±0.5% maximum at full load Inrush Current 100A @ 115 VAC or 200A @ 230 VAC at 25˚ C cold start Withstand Voltage 5600VDC from input to output (2 MOPP) 2100VDC from input to ground (1 MOPP) 700VDC from output to ground (To verify AC strength, get correct test method to avoid power supply damage.) For Class II models, 4000 VAC from input to output MTBF 100,000 hours at full load at 25°C ambient, calculated per MIL- HDBK-217F

© TT Electronics plc General Note All data sheets are subject to change without notice. ISS.2 20/07/2020 Page: 3 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Diagrams