PMP135 TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

© TT Electronics plc General Note All data sheets are subject to change without notice. ISS.1 22/07/2020 Page: 1 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Description: The PMP135 series of AC/DC switching power supplies are for 120-135 watts of continuous output power. They are enclosed in a 94V-0 rated polyphenylene-oxide case with an IEC320/C14 or IEC320/C18 inlet to mate with interchangeable cord for world-wide use. All models meet EN55011 and FCC class B emission limits, and are designed for medical applications. Features:

  • Low Safety ground leakage current
  • Wide input range 90 to 264 VAC
  • Power factor corrected
  • 200% peak power capability on models below 26Vdc output
  • Optional output connectors
  • Overvoltage protection
  • Over– temperature protection
  • Overcurrent protection
  • Compliant with CEC and Energy Star Efficiency level V requirements * No Load power consumption less than 0.5W * Average active efficiency greater than 87%
  • Compliant with RoHS requirements
  • IEC 60601-1-2-4th Edition EMC Compliant Model1 Average Active Efficiency (typical) @ 115/230 Vac Output Class I Class II V1 Minimum Current Maximum Current Peak Current2 Tol Ripple & Noise3 Max Power PMP135-12 PMP135F-12 12V 0A 10A 20A ±5% 120mV 120W 87/89% PMP135-12-1 PMP135F-12-1 13V 0A 9.23A 18.5A ±5% 130mV 120W 87/89% PMP135-13 PMP135F-13 14-16V 0A 9.29A 18.6A ±5% 150mV 130W 87/89% PMP135-13-1 PMP135F-13-1 18-19V 0A 7.50A 15A ±5% 180mV 135W 87/89% PMP135-13-3 PMP135F-13-3 20-21V 0A 6.75A 13.5A ±5% 200mV 135W 87/89% PMP135-14 PMP135F-14 24-25V 0A 5.63A 11.3A ±5% 240mV 135W 88/90% PMP135-15 PMP135F-15 28-29V 0A 4.83A 5.8A ±5% 280mV 135W 88/90% PMP135-16 PMP135F-16 30-32V 0A 4.50A 5.4A ±5% 300mV 135W 89/90% PMP135-17 PMP135F-17 36-38V 0A 3.75A 4.5A ±5% 360mV 135W 89/91% PMP135-18 PMP135F-18 46-50V 0A 2.94A 3.5A ±5% 480mV 135W 90/91% NOTES: 1. Class I models are equipped with IEC320/C14 inlet, and class II models with IEC320/C18 inlet. 2. For 10 seconds maximum, average power not to exceed maximum power rating. 3. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output.

© TT Electronics plc General Note All data sheets are subject to change without notice. ISS.1 22/07/2020 Page: 2 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Specifications Safety Standards & EMC Specifications Safety Standard Approvals UL ES 60601-1, CSA C22.2 No. 60601-1 File No. E178020 TÜV EN 60601-1 EMI Standard EN55011, FCC & VCCI Class B conducted and radiated EMC Performance EN61000-3-2: Harmonic distortion, class A and D EN61000-3-3: Line flicker EN61000-4-2: ESD, ±15 KV air and ±8 KV contact EN61000-4-3: Radiated immunity, 10 V/m EN61000-4-4: Fast transient/burst, ±2 KV EN61000-4-5: Surge, ±1 KV diff., ±2 KV com EN61000-4-6: Conducted immunity, 10 Vrms EN61000-4-8: Magnetic field immunity, 30 A/m EN61000-4-11: Voltage dip immunity, 30% reduction for 500 ms, 100% reduction for 10 ms *Consult with TT Electronics for information on additional country safety approvals Input Specifications Input Voltage Range 90 to 264 Vdc Input Frequency Range 47 to 63Hz Input Current 1.60 A (rms) for 115 VAC or 0.80 A (rms) for 230 VAC Earth Leakage Current 200 μA max. @ 264 VAC, 63 Hz Touch Current 100 μA max. @ 264 VAC, 63 Hz Power Factor >0.9 Output Specifications Ripple and noise 1% peak to peak maximum at the full load Over Voltage Protection Provided and set at 115-140% of its nominal output voltage Over Current Protection Protected to short circuit conditions Temperature Coefficient ±0.04%/°C maximum Transient Response Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 us after a 25% step load change Environmental Specifications Operating Temperature 0°C to +60°C (See Derating) Storage Temperature -40°C to +85°C Relative Humidity 5% to 95% non-condensing Derating Derate from 100% at +40°C, linearly to 50% at +60°C General Specifications Switching Frequency 90-160KHz Efficiency 87% min. at full load Hold-up Time 15ms minimum at 110 VAC Power Factor 0.98 Typical at 115 VAC Line Regulation ±0.5% maximum at full load Inrush Current 80A @ 115 VAC or 160A @ 230 VAC, at 25°C cold start Withstand Voltage 5600VDC from input to output (2 MOPP) 2100VDC from input to ground (1 MOPP) 700VDC from output to ground (To verify AC strength, get correct test method to avoid power supply damage.) For Class II models, 4000VAC from input to output MTBF 150,000 hours at full load at 25°C ambient , calculated per MIL-HDBK- 217F

© TT Electronics plc General Note All data sheets are subject to change without notice. ISS.1 22/07/2020 Page: 3 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Diagrams