PM8311 PMC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
PMC-2060577, Issue 1 © Copyright PMC-Sierra, Inc. 2006 All rights reserved. Proprietary and Confidential to PMC-Sierra, Inc. and for its customers’ internal use. High Density T1/E1 Framer, VT/TU Mapper & M13 Mux with Integrated SONET/SDH Framers PRODUCT OVERVIEW The PM8311 TEMUX 168 is a single device integrating 2xOC-3/STM-1 SONET/SDH framers for working and protect links, 168/126 T1/E1 framers, 6 DS3/E3 framers, 6 M13/G.747 multiplexers and 6 VT/TU mappers. Designed for lower-density applications than its PM8310 TEMUX 336 counterpart, the TEMUX 168 device also interfaces seamlessly with a broad range of PMC-Sierra solutions. The TEMUX 168 includes the Extended Serial SONET/SDH interface (ESSI), enabling:
- A low pin-count interconnect to additional TEMUX 168 devices
- SONET/SDH cross-connects in transport applications
- Ethernet over SONET/SDH mappers such as the PMC-Sierra PM4390 ARROW M8xFE The device also includes the SBI bus, which enables simple intercon- nects with PMC-Sierra Layer 2 solutions. The TEMUX 168 is fully hardware and software compatible with the TEMUX 336. BENEFITS
- Complete SONET/SDH front end with T1/E1, DS3/E3 framers/mappers/multiplexers on a single-chip that meets ATCA/AMC space and power constraints.
- Integrated SBI bus simplifies interconnection to layer 2 processors
- Meets timing requirements for wireless backhaul, critical for CES- based PWE3 applications, by enabling independent timing for all 168/128 T1/E1s across the SBI using the V4 byte
- Extended Serial SONET/SDH Interface (ESSI) can aggregate up to 2xOC-3/STM-1 on a single 4-wire interface, enabling equipment protection in ACTA/AMC systems.
- Supports linear 1+1 protection on the same device or to a companion TEMUX 168
- Enables a scalable architecture from T1/E1 up to OC-12/STM4
- Supports T1/E1 mapping directly into SONET/SDH using V1.5/TU-11 or VT2/TU-12 or multiplexed DS3s using M13 or G.747
- Supports advanced test features including programmable pattern generation and detection for up to 64 byte sequences
- Fully integrated, monolithic IC ensures reliability PRODUCT HIGHLIGHTS
- 4 OC-3/STM-1 SONET/SDH framers
- 168 T1/126 E1 framers
- 6 M13 multiplexers, including support for G.747 multiplexing
- 6 DS3/E3 framers
- High order path processor for a SONET STS-3 or an SDH STM-1
- Tributary path processor for 168 VT1.5/TU-11s or 126 VT2/TU-12s
- Byte synchronous and bit asynchronous mapper for 168 VT1.5/TU- 11s or 126 VT2/TU-12s
- Tributary path processor for 6 TU-3s
- Mapper for 6 DS3s or 6 E3s (TU-3 and AU-3) Preliminary Product Brief Rx ESSI (w+p) Tx ESSI (w+p) OC-3 OC-3 622M ESSI 622M ESSI SONET/SDH Transmitter (w+p) OC-3 OC-3 SONET/SDH Framer (w+p) SBI, SBI-TR or 32M H-MVIP SBI, SBI-TR or 32M H-MVIP T1/E1 Tran HO/LO Pointer Processor DS3 Tran M13 Mux Tx System Interface (SBI, SBI-TR, H-MVIP) M13 DMux T1/E1 Frmr Rx System Interface (SBI, SBI-TR, H-MVIP) to DS3/E3 LIU to DS3/E3 LIU DS3 Frmr STS-1 Switch SONET/ SDH Mapper BLOCK DIAGRAM
PM8311 TEMUX 168 High Density T1/E1 Framer, VT/TU Mapper & M13 Mux with Integrated SONET/SDH Framers Corporate Head Office: PMC-Sierra, Inc. Mission Towers One
3975 Freedom Circle
Santa Clara, CA, 95054, U.S.A. Tel: 1.408.239.8000 Fax: 1.408. 492.1157 PMC-2060577, Issue 1 © Copyright PMC-Sierra, Inc. 2006. All rights reserved. For a complete list of PMC-Sierra’s trademarks , visit www.pmc-sierra.com/legal/. Other product and company names mentioned herein may be the trademarks of their respective owners. For corporate information, send email to: info@pmc-sierra.com. All product documentation is available on our web site at: www.pmc-sierra.com. Operations Head Office: PMC-Sierra, Inc. 100-2700 Production Way Burnaby, BC V5A 4X1 Canada Tel: 1.604.415.6000 Fax: 1.604.415.6200 INTERFACES
- Up to 4 SONET/SDH network interfaces
- SONET/SDH Transport and Path overhead interface
- Two 622-Mbit/s Extended Serial SONET/SDH Interfaces (ESSIs)
- Line-side serial interface for up to 6 DS3s or E3s
- System-side Scalable Bandwidth Interconnect (SBI) bus for high density interconnection of up to 168 T1 streams, 126 E1 streams, 6 DS3 streams, 6 E3 streams, or 6 arbitrary rate streams
- System-side serial interface for up to 6 DS3s or E3s
- Flexible bandwidth interface for up to 6 arbitrary rate ports
- 32 Mbit/s Synchronous TDM Interface (based on H-MVIP)
- Microprocessor- and IEEE 1149.1-compliant JTAG interface PACKAGE
- 896-pin FCBGA (31 x 31 mm)
- Supports industrial temperature range (-40 ºC to 85 °C)
APPLICATIONS
- ATCA/AMC-based line cards
- Voice and media gateways
- Wireless base station controllers (BSC) and radio network controllers (RNC)
- Routers and multi-service switches
- Edge aggregation switches
- Multi-service provisioning platforms Client Services Termination Card Network Processor Network Processor I/F FPGA Ethernet PHY SBI PM8311 TEMUX 168 ESSI to Switch Fabric(working) ESSI to Switch Fabric(protect) 10/100/ 1000 Ethernet TRANSPORT EQUIPMENT ADM, MSPP & PACKET ADMS FURTHER RESOURCES WIRELINE EQUIPMENT SOLUTIONS www.pmc-sierra.com/ethernet-sonet-sdh-mac-framer-controller-chips TECHNICAL DOCUMENTATION www.pmc-sierra.com/products/DocFind.html ML-PPP/ML-FR-enabled Line Card 1x or 2x OC-3/ STM-1 Packet Fabric SFP Optics Packet Switch Interface PM7305 FREEDM 336LE SBIPM8311 TEMUX 168 ROUTER/MULTI-SERVICE SWITCH Channelized TDM Line Card Up to 6x T3/E3 TDM Fabric T3/E3 LIU PM8611 SBS Lite SBIPM8311 TEMUX 168 NEXT-GENERATION VOICE Network Processor-based WAN Line Card NxOC-3/ STM-1 or OC-12/ STM-4 Switch Fabric SFP Optics Network Processor SBIPM8311 TEMUX 168 Network Processor I/F FPGA WIRELESS CARD