PM75RVA060_05 MITSUBISHI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
MITSUBISHI <INTELLIGENT POWER MODULES> PM75RVA060 FLAT-BASE TYPE INSULATED PACKAGE Jun. 2005 MITSUBISHI <INTELLIGENT POWER MODULES> PM75RVA060 FLAT-BASE TYPE INSULATED PACKAGE PM75RVA060 FEATURE
- 3 φ 75A, 600V Current-sense IGBT for 20kHz switching
- 30A, 600V Current-sense regenerative brake IGBT
- Monolithic gate drive & protection logic
- Detection, protection & status indication circuits for over- current, short-circuit, over-temperature & under-voltage
- Acoustic noise-less 7.5kW class inverter application
- UL Recognized Yellow Card No. E80276(N) File No. E80271 APPLICATION General purpose inverter, servo drives and other motor controls PACKAGE OUTLINES Dimensions in mm 17. UN 18. VN 19. WN 8. VVP1 9. UFO 10. VUPC 11. UP 12. VUP1 13. Br 14. FO 1. WFO 2. VWPC 3. WP 4. VWP1 5. VFO 6. VVPC 7. VP 0.64 UV W BP N 171819 13 161514 1211109 8765 4321 76 ±0.5 20 2017 73.7 A A : DETAIL 7.5 110 177.5 7.574 ±0.25 1 ±0.3 12.5 2.54 ±0.25 2.54 ±0.25 14.6 ±0.3 43.57 ±0.3 95 ±0.25 4–φ5.5 MOUNTING HOLES 6–M5NUTS 4–R6 21.2 31.6 32.6 19.7 +1.0 –0.5 LABEL C0.7 15. VNC 16. VN1 TERMINAL CODE 4-φ3
MITSUBISHI <INTELLIGENT POWER MODULES> PM75RVA060 FLAT-BASE TYPE INSULATED PACKAGE Jun. 2005 ConditionParameterSymbol VCES ±IC ±ICP PC Tj Collector-Emitter Voltage Collector Current Collector Current (Peak) Collector Dissipation Junction Temperature V D = 15V, VCIN = 15V TC = 25°C TC = 25°C TC = 25°C V A A W MAXIMUM RATINGS (Tj = 25°C, unless otherwise noted) INVERTER PART Symbol Parameter Condition Ratings Unit 600 150 284 –20 ~ +150 INTERNAL FUNCTIONS BLOCK DIAGRAM VCES IC ICP PC VR(DC) IF Tj BRAKE PART Collector-Emitter Voltage Collector Current Collector Current (Peak) Collector Dissipation FWDi Rated DC Reverse Voltage FWDi Forward Current Junction Temperature VD = 15V, VCIN = 15V TC = 25°C TC = 25°C TC = 25°C TC = 25°C TC = 25°C V A A W V A Symbol Parameter Condition Ratings Unit 600 178 600 –20 ~ +150 V FO IFO CONTROL PART V mA Supply Voltage Input Voltage Fault Output Supply Voltage Fault Output Current Ratings Unit Applied between : VUP1-VUPC VVP1-VVPC, VWP1-VWPC, VN1-VNC Applied between : UP-VUPC, VP-VVPC WP-VWPC, UN • VN • WN • Br-VNC Applied between : UFO-VUPC, VFO-VVPC, WFO-VWPC FO-VNC Sink current at UFO, VFO, WFO and FO terminal VD VCIN V V GND GND Si Out In FO VCCGND GND Si Out In FO VCCGND GND Si Out In FO VCCGND GND Si Out In FO VCC FO Br V NC WN VN UNVN1 PUVWNB TEMP VWPC WP VWP1 GND In V CC GND Si OUT WFO FO VVPC VP VVP1 GND In V CC GND Si OUT VFO FO VUPC UP VUP1 GND In V CC GND Si OUT UFO FO Rfo RfoRfoRfo Rfo = 1.5kΩ
MITSUBISHI <INTELLIGENT POWER MODULES> PM75RVA060 FLAT-BASE TYPE INSULATED PACKAGE Jun. 2005 TOTAL SYSTEM 3.80 3.05 3.30 2.1 0.3 1.1 2.9 1.2 Min. Typ. Max. Collector-Emitter Saturation Voltage Collector-Emitter Cutoff Current C = 75A, VD = 15V, VCIN = 15V Tj = 25°C Tj = 125°C ELECTRICAL CHARACTERISTICS (Tj = 25°C, unless otherwise noted) INVERTER PART ParameterSymbol Test Condition VCE(sat) ICES VEC ton trr tc(on) toff tc(off) Limits 0.4 2.35 2.55 2.20 0.8 0.2 0.3 1.8 0.6 T j = 25°C Tj = 125°C FWDi Forward Voltage Switching Time VD = 15V, VCIN = 0V↔ 15V VCC = 300V, IC = 75A Tj = 125°C Inductive Load (upper and lower arm) VCE = VCES, VCIN = 15V VD = 15V, IC =75A VCIN = 0V V mA V µs Unit ParameterSymbol Supply Voltage Protected by SC Supply Voltage (Surge) Module Case Operating Temperature Storage Temperature Isolation Voltage Condition V CC(surge) TC Tstg Viso Ratings VCC(PROT) 400 500 –20 ~ +100 –40 ~ +125 2500 Unit V Vrms V VD = 13.5 ~ 16.5V, Inverter Part, Tj = 125°C Start Applied between : P-N, Surge value or without switching (Note-1) 60Hz, Sinusoidal, Charged part to Base, AC 1 min. VCE(sat) ICES VFM V mA Min. Typ. Max. V Collector-Emitter Saturation Voltage FWDi Forward Voltage Collector-Emitter Cutoff Current I F = 30A Tj = 25°C Tj = 125°C UnitParameterSymbol Test Condition Limits 2.80 3.05 3.30 2.35 2.55 2.20 T j = 25°C Tj = 125°C BRAKE PART VD = 15V, IC = 30A VCIN = 0V VCE = VCES, VCIN = 15V (Note-1) T C measurement point is below. (3mm depth at the center of the side of base plate) Tc
MITSUBISHI <INTELLIGENT POWER MODULES> PM75RVA060 FLAT-BASE TYPE INSULATED PACKAGE Jun. 2005 3.5 3.5 Mounting part screw : M5 Main terminal screw : M5 Symbol Parameter Mounting torque Mounting torque Weight Test Condition Unit N • m N • m g Limits Min. Typ. Max. 2.5 2.5 3.0 3.0 560 MECHANICAL RATINGS AND CHARACTERISTICS (Note-2) Fault output is given only when the internal SC, OT & UV protection. Fault output of OT protection operate by lower arm. Fault output of OT, UV protection given pulse while over level. VD = 15V Base-plate Temperature detection, VD = 15V –20 ≤ Tj ≤ 125°C VD = 15V, VFO = 15V (Note-2) VD = 15V (Note-2) Trip level Reset level Trip level Reset level Circuit Current Input ON Threshold Voltage Input OFF Threshold Voltage Over Current Trip Level Short Circuit Trip Level Over Current Delay Time Short Circuit Current Delay Time Over Temperature Protection Supply Circuit Under-Voltage Protection Fault Output Current Minimum Fault Output Pulse Width V th(ON) Vth(OFF) OC SC t off(OC) toff(SC) OT OTr UV UV r IFO(H) IFO(L) tFO –20 ≤ Tj ≤ 125°C, VD = 15V, Break part –20≤ Tj ≤ 125°C, VD = 15V VD = 15V, Break part Inverter part Brake part CONTROL PART ID ParameterSymbol µs V mA ms 1.8 2.3 125 12.5 0.01 mA— 1.2 1.7 115 111 11.5 1.0 Max.Min. Typ. Unit Limits 1.5 2.0 118 100 12.0 12.5 1.8 V µs A A VD = 15V, VCIN = 15V Applied between : UP-VUPC, VP-VVPC, WP-VWPC UN • VN • WN • Br-VNC Test Condition VN1-VNC V*P1-V*PC Rth(j-c)Q Rth(j-c)F Rth(j-c)Q Rth(j-c)F Rth(c-f) Symbol THERMAL RESISTANCES 0.44 0.96 0.70 1.50 0.027 °C/W Inverter IGBT part (per 1/6 module) Inverter FWDi part (per 1/6 module) Brake IGBT part Brake FWDi part Case to fin, Thermal grease applied (per 1 module) Parameter Test Condition Unit Limits Min. Typ. Max. Junction to case Thermal Resistances Contact Thermal Resistance RECOMMENDED CONDITIONS FOR USE Recommended value UnitTest ConditionSymbol Parameter VApplied across P-N terminals Applied between : VUP1-VUPC, VVP1-VVPC VWP1-VWPC, VN1-VNC (Note-3) Applied between : UP-VUPC, VP-VVPC, WP-VWPC UN • VN • WN • Br-VNC For IPM’s each input signals Using Application Circuit input signal of IPM, Sinusoidal PWM VVVF inverter Supply Voltage Control Supply Voltage Input ON Voltage Input OFF Voltage Arm Shoot-through Blocking Time PWM Input Frequency ≤ 400 15 ± 1.5 ≤ 0.8 ≥ 4.0 ≥ 2.5 ≤ 20 VCC VCIN(ON) VCIN(OFF) tdead fPWM VD V µs kHz V (Note-3) With ripple satisfying the following conditions dv/dt swing ≤ ±5V/µs, Variation ≤ 2V peak to peak
MITSUBISHI <INTELLIGENT POWER MODULES> PM75RVA060 FLAT-BASE TYPE INSULATED PACKAGE Jun. 2005 01234 Tj = 25°C VD = 17V 13V 15V 10 12 14 16 18 20 Tj = 25°C Tj = 125°C IC = 75A 100 101 102 Tj = 25°C Tj = 125°C VD = 15V 101 10223 5 7 10323 5 7 10–1 100 101 tc(off) tc(on) toff ton Tj = 125°C VCC = 300V VD = 15V Inductive load 10–1 10–2 100 101 10223 5 7 10323 5 7 100 101 102 trr Irr VCC = 300V VD = 15V Inductive load Tj = 25°C Tj = 125°C 0 1 02 03 04 05 06 07 08 0 Tj = 25°C Tj = 125°C VD = 15V COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) OUTPUT CHARACTERISTICS (TYPICAL) COLLECTOR CURRENT IC (A) COLLECTOR-EMITTER VOLTAGE VCE (V) COLLECTOR RECOVERY CURRENT –IC (A) COLLECTOR-EMITTER SATURATION VOLTAGE VCE (sat) (V) CONTROL SUPPLY VOLTAGE VD(V) EMITTER-COLLECTOR VOLTAGE VEC (V) SWITCHING CHARACTERISTICS (TYPICAL) SWITCHING TIME (µs) COLLECTOR CURRENT IC (A) DIODE REVERSE RECOVERY CHARACTERISTICS (TYPICAL) REVERS RECOVERY TIME trr (µs) COLLECTOR RECOVERY CURRENT –IC (A) COLLECTOR-EMITTER SATURATION VOLTAGE VCE (sat) (V) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) COLLECTOR CURRENT IC(A) DIODE FORWARD CHARACTERISTICS (TYPICAL) REVERSE RECOVERY CURRENT lrr (A) PERFORMANCE CURVES (Inverter Part)
MITSUBISHI <INTELLIGENT POWER MODULES> PM75RVA060 FLAT-BASE TYPE INSULATED PACKAGE Jun. 2005 10–3 10–2 10–1 100 101 23 5723 5723 57 10010–110–210–3 23 57 101 Single Pulse Per unit base = Rth(j – c)Q = 0.44°C/W 10–3 10–2 10–1 100 101 23 5723 5723 57 10010–110–210–3 23 57 101 Single Pulse Per unit base = Rth(j – c)F = 0.96°C/W NORMALIZED TRANSIENT THERMAL IMPEDANCE Zth (j – c) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT per 1 element) NORMALIZED TRANSIENT THERMAL IMPEDANCE Zth (j – c) TIME (s) TIME (s) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (FWDi per 1 element) PERFORMANCE CURVES (Inverter Part)
MITSUBISHI <INTELLIGENT POWER MODULES> PM75RVA060 FLAT-BASE TYPE INSULATED PACKAGE Jun. 2005 01234 Tj = 25°C VD = 17V 13V 15V 10 12 14 16 18 20 Tj = 25°C Tj = 125°C IC = 30A 100 101 102 Tj = 25°C Tj = 125°C VD = 15V 01 0 2 0 3 0 4 0 Tj = 25°C Tj = 125°C VD = 15V 10–3 10–2 10–1 100 101 23 5723 5723 57 10010–110–210–3 23 57 101 Single Pulse Per unit base = Rth(j – c)Q = 0.70°C/W 10–3 10–2 10–1 100 101 23 5723 5723 57 10010–110–210–3 23 57 101 Single Pulse Per unit base = Rth(j – c)F = 1.50°C/W OUTPUT CHARACTERISTICS (TYPICAL) COLLECTOR CURRENT IC (A) COLLECTOR-EMITTER VOLTAGE VCE (V) COLLECTOR RECOVERY CURRENT –IF (A) COLLECTOR-EMITTER SATURATION VOLTAGE VCE (sat) (V) CONTROL SUPPLY VOLTAGE VD(V) EMITTER-COLLECTOR VOLTAGE V FM (V) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) COLLECTOR CURRENT IC(A) DIODE FORWARD CHARACTERISTICS (TYPICAL) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT part) NORMALIZED TRANSIENT THERMAL IMPEDANCE Zth (j – c) TIME (s) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (FWDi part) NORMALIZED TRANSIENT THERMAL IMPEDANCE Zth (j – c) TIME (s) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) COLLECTOR-EMITTER SATURATION VOLTAGE VCE (sat) (V) PERFORMANCE CURVES (Brake Part)