PM75CVA120

PM75CVA120_09 MITSUBISHI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

MITSUBISHI <INTELLIGENT POWER MODULES> PM75CVA120 FLAT-BASE TYPE INSULATED PACKAGE Jun. 2005 MITSUBISHI <INTELLIGENT POWER MODULES> PM75CVA120 FLAT-BASE TYPE INSULATED PACKAGE PM75CVA120 FEATURE

• 3 φ 75A, 1200V Current-sense IGBT for 20kHz switching
• Monolithic gate drive & protection logic
• Detection, protection & status indication circuits for over- current, short-circuit, over-temperature & under-voltage (P-F O available from upper leg devices)
• Acoustic noise-less 15kW class inverter application
• UL Recognized Yellow Card No. E80276(N) File No. E80271 APPLICATION General purpose inverter, servo drives and other motor controls PACKAGE OUTLINES Dimensions in mm UW V N P LABEL 1234 5678 91 01 1 1 2 14151613 191817 A 102 15.1 12.3 7.5 7.5 89.2 ±0.5 105 ±0.25 120 87 ±0.25 2.54 ±0.25 2.54 ±0.25 2.54 ±0.25 2.54 ±0.25 34.7 33.7 24.1 14.6 ±0.3 43.57 ±0.3 18.25 12.3 125-M5NUTS 1.1 ±0.3 4–φ5.5MOUNTING HOLES 24.1 21.6 19.5 22 22 85.2 +1.0 –0.5 0.64 A : DETAIL 4-φ3 C0.7 15. VNC 16. VN1 17. UN 18. VN 19. WN 8. VVP1 9. UFO 10. VUPC 11. UP 12. VUP1 13. NC 14. FO 1. WFO 2. VWPC 3. WP 4. VWP1 5. VFO 6. VVPC 7. VP TERMINAL CODE

MITSUBISHI <INTELLIGENT POWER MODULES> PM75CVA120 FLAT-BASE TYPE INSULATED PACKAGE Jun. 2005 Applied between : VUP1-VUPC VVP1-VVPC, VWP1-VWPC, VN1-VNC Applied between : UP-VUPC, VP-VVPC, WP-VWPC UN • VN • WN-VNC Applied between : UFO-VUPC, VFO-VVPC, WFO-VWPC FO-VNC Sink current at UFO, VFO, WFO and FO terminal VCES ±IC ±ICP PC Tj Collector-Emitter Voltage Collector Current Collector Current (Peak) Collector Dissipation Junction Temperature V D = 15V, VCIN = 15V TC = 25°C TC = 25°C TC = 25°C V A A W MAXIMUM RATINGS (Tj = 25°C, unless otherwise noted) INVERTER PART Symbol Parameter Condition Ratings Unit 1200 150 455 –20 ~ +150 INTERNAL FUNCTIONS BLOCK DIAGRAM VFO IFO CONTROL PART V mA Supply Voltage Input Voltage Fault Output Supply Voltage Fault Output Current Symbol Parameter Condition Ratings Unit VD VCIN V V Rfo Rfo Rfo Rfo Rfo=1.5kΩ FO NC VNC WN VN1 VN NWV U P UN V WPC VUPCWFO UFOVVPC VFO WP VP UPVWP1 VUP1VVP1 GND GND Si Si Si Si Si SiOUT TEMP In V CC FO GND GND OUT In V CC FO GND GND OUT In V CC FO GND GND OUT In V CC FO GND GND OUT In V CC FO GND GND OUT In V CC FO Th

MITSUBISHI <INTELLIGENT POWER MODULES> PM75CVA120 FLAT-BASE TYPE INSULATED PACKAGE Jun. 2005 Supply Voltage Protected by SC Supply Voltage (Surge) Module Case Operating Temperature Storage Temperature Isolation Voltage VCC(surge) TC Tstg Viso V VD = 13.5 ~ 16.5V, Inverter Part, Tj = 125°C Start Applied between : P-N, Surge value or without switching (Note-1) 60Hz, Sinusoidal, Charged part to Base, AC 1 min. 800 ParameterSymbol Condition Ratings VCC(PROT) 1000 –20 ~ +100 –40 ~ +125 2500 Unit V Vrms TOTAL SYSTEM (Note-1) T C measurement point is below. (3mm depth at the center of the side of base plate) ELECTRICAL CHARACTERISTICS (Tj = 25°C, unless otherwise noted) INVERTER PART VD = 15V, IC = 75A VCIN = 0V –IC = 75A, VD = 15V, VCIN = 15V V µs V mA 3.30 3.35 3.50 2.3 0.3 1.0 3.4 1.2 Min. Typ. Max. Collector-Emitter Saturation Voltage Collector-Emitter Cutoff Current ParameterSymbol Test Condition VCE(sat) ICES VEC ton trr tc(on) toff tc(off) Limits 0.4 2.65 2.75 2.50 0.9 0.2 0.4 2.4 0.7 T j = 25°C Tj = 125°C FWDi Forward Voltage Switching Time VD = 15V, VCIN = 0V↔ 15V VCC = 600V, IC = 75A Tj = 125°C Inductive Load (upper and lower arm) VCE = VCES, VCIN = 15V Unit Tj = 25°C Tj = 125°C CONTROL PART (Note-2) Fault output is given only when the internal SC, OT & UV protection. Fault output of OT protection operate by lower arm Fault output of OT, UV protection given pulse while over level. VD = 15V, VCIN = 15V Applied between : UP-VUPC, VP-VVPC, WP-VWPC UN • VN • WN-VNC –20≤ Tj ≤ 125°C, VD = 15V VD = 15V Base-plate Temperature detection, VD = 15V Vth(ON) Vth(OFF) SC toff(SC) OT OTr UV UVr IFO(H) IFO(L) tFO Circuit Current Input ON Threshold Voltage Input OFF Threshold Voltage Short Circuit Trip Level Short Circuit Current Delay Time Over Temperature Protection Supply Circuit Under-Voltage Protection Fault Output Current Minimum Fault Output Pulse Width 1.5 2.0 118 100 12.0 12.5 1.8 –20 ≤ T j ≤ 125°C VD = 15V, VFO = 15V (Note-2) VD = 15V (Note-2) V A Trip level Reset level Trip level Reset level ID µs V mA ms 1.8 2.3 125 12.5 0.01 mA— 1.2 1.7 105 111 11.5 1.0 ParameterSymbol Test Condition Max.Min. Typ. Unit Limits VN1-VNC V*P1-V*PC Tc

MITSUBISHI <INTELLIGENT POWER MODULES> PM75CVA120 FLAT-BASE TYPE INSULATED PACKAGE Jun. 2005 Rth(j-c)Q Rth(j-c)F Rth(c-f) Symbol THERMAL RESISTANCES 0.275 0.51 0.022 °C/W Inverter IGBT part (per 1/6 module) Inverter FWDi part (per 1/6 module) Case to fin, Thermal grease applied (per 1 module) Parameter Test Condition Unit Limits Min. Typ. Max. Junction to case Thermal Resistances Contact Thermal Resistance 3.5 3.5 Mounting part screw : M5 Main terminal screw : M5 Symbol Parameter Mounting torque Mounting torque Weight Test Condition Unit N • m N • m g Limits Min. Typ. Max. 2.5 2.5 3.0 3.0 730 MECHANICAL RATINGS AND CHARACTERISTICS RECOMMENDED CONDITIONS FOR USE Symbol VCC VCIN(ON) VCIN(OFF) tdead fPWM VD Recommended value UnitTest ConditionParameter VApplied across P-N terminals Applied between : VUP1-VUPC, VVP1-VVPC VWP1-VWPC, VN1-VNC (Note-3) Applied between : UP-VUPC, VP-VVPC, WP-VWPC UN • VN • WN-VNC For IPM’s each input signals Using Application Circuit input signal of IPM, 3φ Sinusoidal PWM VVVF inverter Supply Voltage Control Supply Voltage Input ON Voltage Input OFF Voltage Arm Shoot-through Blocking Time PWM Input Frequency ≤ 800 15 ± 1.5 ≤ 0.8 ≥ 4.0 ≥ 3.0 ≤ 20 V µs kHz V (Note-3) With ripple satisfying the following conditions dv/dt swing ≤ ±5V/µs, Variation ≤ 2V peak to peak

MITSUBISHI <INTELLIGENT POWER MODULES> PM75CVA120 FLAT-BASE TYPE INSULATED PACKAGE Jun. 2005 0 50 1234

60 VD = 17V

Tj = 25°C VCIN = 0V 0 800 40 20 60 Tj = 25°C Tj = 125°C VD = 15V VCIN = 0V 0 2010 12 14 16 18 IC = 75A VCIN = 0V Tj = 25°C Tj = 125°C 101 10223 5 7 23 5 1037 10–1 100 101

7 Tj = 125°C

VCC = 600V VD = 15V Inductive load ton tc(off) tc(on) toff 100 101 102 VD = 15V VCIN = 15V Tj = 25°C Tj = 125°C 101 10223 5 7 23 55 7 100 101 10–2 10–1 trr lrr VCC = 600V VD = 15V Inductive load Tj = 25°C Tj = 125°C 102 100 OUTPUT CHARACTERISTICS (TYPICAL) COLLECTOR CURRENT IC (A) COLLECTOR-EMITTER VOLTAGE VCE (V) COLLECTOR RECOVERY CURRENT –IC (A) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) COLLECTOR-EMITTER SATURATION VOLTAGE VCE (sat) (V) CONTROL SUPPLY VOLTAGE VD(V) EMITTER-COLLECTOR VOLTAGE VEC (V) SWITCHING CHARACTERISTICS (TYPICAL) SWITCHING TIME (µs) COLLECTOR CURRENT IC (A) DIODE REVERSE RECOVERY CHARACTERISTICS (TYPICAL) REVERS RECOVERY TIME trr (µs) COLLECTOR RECOVERY CURRENT –IC (A) COLLECTOR-EMITTER SATURATION VOLTAGE VCE (sat) (V) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) COLLECTOR CURRENT IC(A) DIODE FORWARD CHARACTERISTICS (TYPICAL) REVERSE RECOVERY CURRENT lrr (A) PERFORMANCE CURVES

MITSUBISHI <INTELLIGENT POWER MODULES> PM75CVA120 FLAT-BASE TYPE INSULATED PACKAGE Jun. 2005 NORMALIZED TRANSIENT THERMAL IMPEDANCE Zth (j – c) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT per 1 element)) NORMALIZED TRANSIENT THERMAL IMPEDANCE Zth (j – c) TIME (s) TIME (s) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (FWDi per 1 element)) 10–3 10–2 10–1 100 101 23 57 10123 57 10010–123 5723 57 10–210–3 Single Pulse Per unit base = Rth(j – c)Q = 0.275°C/W 10–3 10–2 10–1 100 101 23 57 10123 57 10010–123 5723 57 10–210–3 Single Pulse Per unit base = Rth(j – c)F = 0.51°C/W