PM500F TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

© TT Electronics plc General Note All data sheets are subject to change without notice. TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 SL-xxx-xxx ISS.6 22/07/2020 Page: 1 Description: The PM500F series of AC-DC switching power supplies in a package of 3.98 x 7.09 x 1.56 inches are capable of delivering 450-500 watts of continuous power at 30 CFM forced air cooling or 250 watts at convection cooling. The units are constructed on a printed circuit board with a U-bracket for mechanical support and heat sinking. A cover and fan assembly can be added during manufacturing. Features:

  • The PM500F Model is Designed for Home Health Care Application
  • Class II Application
  • Operation Altitude up to 5000 Meters
  • 80-264 VAC Input with Active PFC, >0.9 P.F.
  • Less than 100μA Leakage Current
  • EN55011/55022 Class B Conducted Emissions
  • Inhibit—TTL high to Disable Output
  • Compliant with RoHS Requirements
  • Power Consumption in Standby Mode less than 1W at Standby Power 5V/100mA Model1 Average Efficiency @115/230 Vac Output Class II V1 Min. Current4 Max. Current at convection Tol. Ripple & Noise3 Max. Output Power2 Max. Current at 30 CFM PM500F-12B 12V 0A 20.83A ±2% 120mV 250W/450W 89/91% 37.5A PM500F-13B 15V 0A 16.67A ±2% 150mV 250W/450W 89/91% 30A PM500F-13-1B 18V 0A 13.89A ±2% 180mV 250W/500W 89/91% 27.78A PM500F-14B 24V 0A 10.42A ±2% 240mV 250W/500W 90/92% 20.84A PM500F-15B 28V 0A 8.93A ±2% 280mV 250W/500W 90/92% 17.86A PM500F-16A 30V 0A 8.34 16.67 ±2% 300mV 250W/500W 90/92% PM500F-17B 36V 0A 6.94A ±2% 360mV 250W/500W 90/92% 13.89A PM500F-18B 48V 0A 5.21A ±2% 480mV 250W/500W 90/92% 10.42A PM500F-19B 57V 0A 4.38A ±2% 570mV 250W/500W 90/92% 8.78A NOTES: 1. Suffix “A” in models denotes PCB form, change suffix to “B” for U-Bracket form, “C” for enclosed cover and fan assembly, e.g. PM500F-14C. 2. 250W without moving air or 450-500 W with 30 CFM forced air provided by user for “B” and “C” versions. 3. Ripple and noise is maximum peak-to-peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output. 4. All models may be operated at no-load without damage. At no load, output voltage fluctuates beyond 5% due to the burst-mode operation of the control IC in them for energy saving.

© TT Electronics plc General Note All data sheets are subject to change without notice. TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 SL-xxx-xxx ISS.6 22/07/2020 Page: 2 Specifications Safety Standards & EMC Specifications Safety Standards UL ES 60601-1, CSA C22.2 No. 60601-1 TU V EN 60601-1 EMI Standard EN55011/EN55022, FCC, and VCCI Class B (radiated and conducted) EMC Performance EN61000-3-2: Harmonic distortion, Class A and D EN61000-3-3: Line flicker EN61000-4-2: ESD, ±15 KV air and ± 8KV contact EN61000-4-3: Radiated immunity, 10V/m EN61000-4-4: Fast transient/burst, ±2KV EN61000-4-5: Surge, ±1 KV diff., ±2 KV com. EN61000-4-6: Conducted immunity, 10Vrms EN61000-4-8: Magnetic field immunity, 30 A/m EN61000-4-11: Voltage dip immunity, 30% reduction for 500ms, and 100% reduction for 10ms *Consult with TT Electronics for information on additional country safety approvals Input Specifications Input Voltage Range 80 to 264 Vdc Power Derating Derate linearly from 100% at 90VAC to 90% at 85VAC and 80% at 80VAC Input Frequency Range 47 to 63Hz Input Current 5.2 A (rms) @ 115VAC, 60Hz or 2.6 A (rms) for 230VAC, 50Hz Touch Current 100 µA max. @ 264 VAC, 63 Hz Output Specifications Ripple and Noise 1% peak to peak maximum Remote Sense Compensation for cable losses up to 0.5V Overvoltage Protection Set 112-140% of nominal output voltage Short circuit protection Automatic recovery Over temperature protection Latching by recycle input to reset Temperature Coefficient All outputs ±0.04%/°C maximum Transient Response Maximum excursion of 4%, recovering to 1% of final value within 500 us after a 25% step load change Standby Power 5V at 2A maximum Fan Power 12V at 300 mA maximum Environmental Specifications Operating Temperature -10°C to +70°C Storage Temperature -40°C to +85°C Relative Humidity 5% to 95% non-condensing Temperature Derating De-rate from 100% at +50°C linearly to 50% at +70°C, applicable to convec- tion and forced-air cooling conditions General Specifications Switching Frequency 85 KHz Power Factor >0.9 Efficiency Typical 92% Hold-up Time 20ms minimum at 100 VAC Line Regulation ±0.5% maximum at full load Inrush Current 30A @ 115 Vac or 200A @ 60 Vac at 25°C cold start Withstand Voltage

4000 VAC input to output (2 MOOP)

4000 VAC input to case (2 MOOP)

1500 VAC output to case (1 MOOP)

MTBF 100,000 hours at full load at 25°C ambient, calculated per MIL-HDBK-217F

© TT Electronics plc General Note All data sheets are subject to change without notice. SL-xxx-xxx ISS.6 22/07/2020 Page: 3 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Diagrams

© TT Electronics plc General Note All data sheets are subject to change without notice. SL-xxx-xxx ISS.6 22/07/2020 Page: 4 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Diagrams