PM150 TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

© TT Electronics plc General Note All data sheets are subject to change without notice. TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 SL-xxx-xxx ISS.6 22/07/2020 Page: 1 Description: The PM150 series of AC-DC switching power supplies in a package of 2 x 4 x 1.3 inches are capable of delivering 100-150 watts of continuous power at 7.5 CFM forced air cooling or 100 watts at convection cooling. The units are constructed on a printed circuit board. They are specially designed for medical applications. The units are certified also to IEC /EN /UL /CSA 60950-1 and suitable for data networking, industrial and telecommunication applications. Features:

  • BF Class insulation
  • Operation altitude up to 5000 meters
  • Suitable for both Class I and Class II applications*
  • 2 x 4 inch foot print with 1.3 inch low profile
  • Less than 2 75 μA leakage current
  • W ide input range 80 -264 VAC
  • Meet EN55011 /55022 and FCC Class B
  • Power Factor 0.98 typical
  • 100% burn -in at full load
  • Short -circuit protection
  • Over-temperature protection
  • Power Fail Detect (PFD) signal (optional)
  • Compliant with RoHS requirements
  • No load power consumption less than 0. 5W without PFD or 1W with PFD Model1 Output Efficiency (typical) @115/230 Vac Class II V1 Min. Load Max. Current at convection Max. Current at 7.5 CFM Tol. Ripple & Noise4 Max. Output Power3 Peak2 Current PM150-12A 12V 0A 8.35A 12.5A ±2% 120mV 100W/150W 90/92% 14A PM150-13A 15V 0A 6.70A 10A ±2% 150mV 100W/150W 89/91% 11A PM150-13-1A 18V 0A 5.56A 8.34A ±2% 180mV 100W/150W 91/92% 9.2A PM150-14A 24V 0A 4.20A 6.25A ±2% 240mV 100W/150W 89/92% 7A PM150-16A 30V 0A 3.34A 5A ±2% 300mV 100W/150W 89/92% 5.6A PM150-17A 36V 0A 2.78A 4.17A ±2% 360mV 100W/150W 90/92% 4.6A PM150-18A 48V 0A 2.10A 3.13A ±2% 480mV 100W/150W 89/92% 3.5A NOTES: 1. To order a model with PFD signal, please consult factory to get an exclusive part number distinguishing it from the standard model without PFD signal. 2. Peak output current with 10% duty cycle maximum for less than 15 seconds, average power not to exceed maximum power rating. 4. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 μF tantalum (or electrolytic) capacitor in parallel with a 0.1 μF ceramic capacitor across the output except model PM150-12A which is with a 47 μF tantalum (or electrolytic) capacitor in parallel with a 0.1 μF ceramic capacitor across the output.

© TT Electronics plc General Note All data sheets are subject to change without notice. TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 SL-xxx-xxx ISS.6 22/07/2020 Page: 2 Specifications Safety Standards & EMC Specifications Safety Standard Approvals UL ES 60601-1, CSA C22.2 No. 60601-1 File No. E178020 TÜV EN 60601-1 UL 60950-1 CSA C22.2 No. 60950-1 TÜV EN 60950-1 EMI Standard EN55011/EN55022, FCC, and VCCI Class B (radiated and conducted) EMC Performance EN61000-3-2: Harmonic distortion, Class A and D EN61000-3-3: Line flicker EN61000-4-2: ESD, ±15 KV air and ± 8KV contact EN61000-4-3: Radiated immunity, 10V/m EN61000-4-4: Fast transient/burst, ±2KV EN61000-4-5: Surge, ±1 KV diff., ±2 KV com. EN61000-4-6: Conducted immunity, 10Vrms EN61000-4-8: Magnetic field immunity, 30 A/m EN61000-4-11: Voltage dip immunity, 30% reduction for 500ms, and 100% reduction for 10ms *Consult with TT Electronics for information on additional country safety approvals Input Specifications Input Voltage Range 80 to 264VAC Input Frequency Range 47 to 63Hz Input Current 1.7A (rms) for 115VAC or 0.85A (rms) for 230VAC Earth Leakage Current 275μA max. @ 264VAC, 63Hz Touch Current 100μA max. @ 264 VAC, 63Hz Output Specifications Remote Sense Compensation for cable losses up to 0.5V Overvoltage Protection Set 112-140% of nominal output voltage Overcurrent Protection Output protected to short circuit conditions Temperature Coefficient All outputs ±0.04%/°C maximum Transient Response Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 us after a 25% step load change Fan Power 12V at 0.5 A maximum (isolated) Environmental Specifications Operating Temperature 0°C to +70°C Storage Temperature -40°C to +85°C Relative Humidity 5% to 95% non-condensing Temperature Derating De-rate from 100% at +50°C linearly to 50% at +70°C, applicable to convection and forced-air cooling conditions General Specifications Hold-up Time 10ms minimum at 120 VAC Switching Frequency 133 KHz (typical) Power Factor 0.98 Typical Line Regulation ±0.5% maximum at full load Inrush Current 80A @ 115 Vac or 200A @ 160 Vac at 25°C cold start Withstand Voltage

4000 VAC from input to output (2 MOPP)

1500 VAC from input to ground (1 MOPP)

1500 VAC from output to ground

MTBF 250,000 hours at full load at 25°C ambient, calculated per MIL- HDBK-217F

© TT Electronics plc General Note All data sheets are subject to change without notice. SL-xxx-xxx ISS.6 22/07/2020 Page: 3 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Diagrams