PM1204STR

PM1204 CLARE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Features

Description

Ordering Information

Part # Description PM1204 6 Pin Dip (50/Tube) PM1204S 6 Pin Surface Mount (50/Tube) PM1204STR 6 Pin Surface Mount Tape & Reel PM1204 Units AC Operating 120 V Voltage Load Current 500 mA On State 1.4 V RMS Voltage Drop (at IL = 500 mA) Pin Configuration PM1204 Pinout /K5A/K43 /K31 /K33 /K32 /K34 /K35 /K36 /K41/K43 /K4C/K6F/K61/K64 /K41/K43 /K4C/K6F/K61/K64 /KD0 /K4C/K45/K44 /K2B /K4C/K45/K44

www.clare.com PM1204 Rev. 6

Electrical Characteristics

Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the opera- tional sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Absolute Maximum Ratings (@ 25˚ C) Parameters Conditions Symbol Min Typ Max Units Output Characteristics @ 25°C AC Operating Voltage V T - 20 - 120 V RMS Peak Blocking Voltage - V DRM - - 400 V Load Current (Continuous) V L=120-240VAC I L 0.005 - 0.5 A Off State Leakage Current V DRM ILEAK -- 1m A On-State Voltage Drop - - - 1.4 V RMS Critical Rate of Rise - dv/dt 1000 1200 - V/µS Switching Speeds Turn-on I F=5 mA T ON - - 0.5 cycles Turn-off I F=5 mA T OFF - - 0.5 cycles Zero-Cross Turn-On Voltage 1st half cycle - 2 5 V Sub. half cycle - - 1 V Operating Frequency1 - 20 - 500 Hz Load Power Factor for Guaranteed Turn-On2 - PF 0.25 - - - Input Characteristics @ 25°C Input Control Current For Normal Environment - I F 5- 5 0 m A For High Noise Environment - I F 10 - 100 mA Input Voltage Drop I F=5mA V F 0.9 1.2 1.4 V Input Drop-out Voltage - 0.8 - - V Reverse Input Current V R=5V I R -- 1 0 m A Common Characteristics @ 25°C Input to Output Capacitance - C I/O -3 - p F Input to Output Isolation - V I/O 3750 - - V RMS

1 Zero Cross 1st half cycle @ <100Hz

2 Snubber circuits may be required at low power factors. Parameter Min Typ Max Units Input Power Dissipation - - 150 1 mW Input Control Current - - 50 mA Peak (10ms) - - 1 A Reverse Input Voltage - - 5 V Total Package Dissipation PM - - 800 2 mW Isolation Voltage Input to Output 3750 - - V RMS Operational Temperature -40 - +85 °C Storage Temperature -40 - +125 °C Soldering Temperature Surface Mount Package - - +220 °C (10 Seconds Max.) 1 Derate Linearly 1.33 mW/˚C 2 Derate Linearly 6.67 mW/˚C

www.clare.comRev. 6 PERFORMANCE DATA* The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. PM1204 Typical dv/dt vs. Temperature Ambient Temperature (°C) Critical Rate of Rise (V/µs) /K30 /K38/K30/K30 /K36/K30/K30 /K34/K30/K30 /K32/K30/K30 /K31/K32/K30/K30 /K31/K30/K30/K30 /K32/K35 /K35/K30 /K38/K35 /K56/K6F /K36/K33/K25 /K31/K30/K25 /K52/K43 Vo = 300V dv 0.63 x 300V 189 dt RC RC In accordance with EIA/NARM Standards RS-443 for Solid State Relays PM1204 dv/dt Method PM1204 Typical Forward Voltage vs. Temperature Ambient Temperature (°C) Forward Voltage (V) /K31/K30 /K32/K2E/K30 /K31/K2E/K35 /K31/K2E/K30 /K30 /K30/K2E/K35 /K32/K35 /K35/K30 /K37/K35 /K31/K30/K30 /K31/K32/K35 /K31/K35/K30 PM1204 Load Current, Free Air Ambient Temperature (°C) Load Current (A) /K2D/K34/K30 /K31/K2E/K32 /K31/K2E/K30 /K30/K2E/K38 /K30/K2E/K36 /K30/K2E/K34 /K30/K2E/K32 /K30/K35 /K35 /K38 /K35 R Θ JA = 60°C/W PM1204 Max. Surge Current (Non-Repetitive) Pulse Duration (ms) Peak Surge Current (A) /K32/K30 /K31/K35 /K31/K30 /K35 /K30 /K31/K36 /K35/K30 /K31/K30/K30 NOTE: Values apply to TJ = 50°C before Surge

www.clare.com PM1204 Rev. 64 Dimensions mm (inches) Mechanical Dimensions Tape and Reel Packaging for 6 Pin Power DIP Surface Mount Package 7.493 – .102 (.295 – .004) 12.090 (.476) 1.753 – .102 (.069 – .004) 3.987 – .102 (.157 – .004) 1.498 – .102 (.265) .406 MAX. (.016) 4.877 (.192) Top Cover Tape 2.007 – .102 (.079 – .004) 11.989 – .102 (.472 – .004) User Direction of Feed .050R TYP. 16.002 – .305 (.630 – .012) 10.300 (.405) Embossment Embossed Carrier Top Cover Tape Thickness .102 MAX. (.004) 10.300 – .102 (.405 – .004) 1.549 – .102 (.061 – .004) 330.2 DIA. (13.00) 1 6 PC Board Pattern (Top View) 6.350 ± .127 (.250 ± .005) 2.540 ± .127 (.100 ± .005) 7.620 ± .127 (.300 ± .005) 5.080 ± .127 (.200 ± .005) 6-.800 DIA. (6-.031 DIA.) PC Board Pattern (Top View) 2.540 ± .127 (.100 ± .005) 8.305 ± .127 (.327 ± .005) 1.905 ± .127 (.075 ± .005) 1.499 ± .127 (.059 ± .005)

6 Pin Power DIP Through Hole (Standard)

6 Pin Power DIP Surface Mount (“S” Suffix)

78 Cherry Hill Drive

Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Clare Micronix Division

145 Columbia

Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 SALES OFFICES AMERICAS Americas Headquarters Clare Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd.

3425 Harvester Road, Suite 202

Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare

1852 West 11th Street, #348

Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 EUROPE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 France Clare France Sales Lead Rep 99 route de Versailles

91160 Champlan

Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12

85077 Manching

Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 ASIA PACIFIC Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 http://www.clare.com Worldwide Sales Offices Specification: DS-PM1204-R6 ©Copyright 2000, Clare, Inc. All rights reserved. Printed in USA. 2/6/01 Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, with- out notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct phys- ical harm, injury or death to a person.