PM1100 TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

© TT Electronics plc General Note All data sheets are subject to change without notice. TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 SL-xxx-xxx ISS.6 22/07/2020 Page: 1 Description: The PM1100 series of AC-DC switching power supplies in a package of 5.91 x 9.25 x 2.4 inches are capable of delivering 1100 watts of continuous power. The units are constructed on a printed circuit board with an enclosed format for mechanical support and heat sinking. They are designed for medical applications including those needing BF rated insulation and/ or an operation altitude up to 5000 meters. Features:

  • BF Class insulation
  • Operation altitude up to 5000 meters
  • Compact size 5.91” x 9.25” x 2.4”
  • Less than 300 μA leakage current
  • EN55011 Class B conducted emissions
  • Inhibit– TTL low to disable output
  • Standard PS Off and DC OK signals
  • High Efficiency 89% typical
  • Compliant with RoHS requirements
  • Standby output 5 VDC at 200 Ma
  • Variable speed internal fan
  • Overvoltage protection
  • Overcurrent Protection
  • Thermal protection Model Output Efficiency (typical) @115/230 Vac V1 Min. Load Max. Current at convection Peak Current Tol. Ripple & Noise2 Max. Output Power1 PM1100-14C 24V 0A 45.84A 52.10A ±2% 240mV 1100W/1250W 88/92% PM1100-15C 28V 0A 39.29A 44.65A ±2% 280mV 1100W/1250W 88/92% PM1100-16C 32V 0A 34.38A 39.07A ±2% 320mV 1100W/1250W 90/93% PM1100-17-1C 34V 0A 32.35A 36.77A ±2% 340mV 1100W/1250W 89/93% PM1100-17C 36V 0A 30.56A 34.73A ±2% 360mV 1100W/1250W 90/93% PM1100-18-1C 42V 0A 26.20A 29.77A ±2% 420mV 1100W/1250W 88/92% PM1100-18C 48V 0A 22.92A 26.10A ±2% 480mV 1100W/1250W 89/92% NOTES: 1. Peak current and power possible at 170-260 VAC input, 10 seconds, 35% duty cycle. 2. Ripple and noise is maximum peak-to-peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output.

© TT Electronics plc General Note All data sheets are subject to change without notice. SL-xxx-xxx ISS.6 22/07/2020 Page: 2 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Specifications Input Specifications Input Voltage Range 90 to 264VAC Input Frequency Range 47 to 63Hz Input Current 16A (rms) @100VAC, 60 Hz or 8A( rms) @240VAC, 50 Hz Earth Leakage Current 300μA max. @ 264VAC, 63Hz Touch Current 100μA max. @ 264 VAC, 63Hz Output Specifications Ripple & Noise 1% peak to peak maximum Remote Sense Compensation for cable losses up to 0.5V Overvoltage Protection Set 112-140% of nominal output voltage Overcurrent Protection Set at 120-140% of maximum output current Thermal Shutdown Protected to overtemperature conditions Temperature Coefficient All outputs ±0.04%/°C maximum Transient Response Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 us after a 25% step load change Standby Power 5V at 200 mA maximum Fan Power 12V at 1A maximum Environmental Specifications Operating Temperature -10°C to +70°C Storage Temperature -40°C to +85°C Relative Humidity 5% to 95% non-condensing Temperature Derating De-rate from 100% at +50°C linearly to 50% at +70°C, applicable to convection and forced-air cooling conditions General Specifications Switching Frequency 40 KHz to 200 KHz Power Factor >0.9 Hold-up Time 10ms minimum at 110 VAC Line Regulation ±0.5% maximum at full load Inrush Current 50A @ 115 Vac or 200A @ 100 Vac at 25°C cold start Withstand Voltage

4000 VAC from input to output (2 MOPP)

1500 VAC from input to ground (1 MOPP)

1500 VAC from output to ground

MTBF 100,000 hours at full load at 25°C ambient, calculated per MIL- HDBK-217F

© TT Electronics plc General Note All data sheets are subject to change without notice. SL-xxx-xxx ISS.6 22/07/2020 Page: 3 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Specifications Safety Standards & EMC Specifications Safety Standard Approvals UL ES 60601-1, CSA C22.2 No. 60601-1 File No. E178020 TÜV EN 60601-1 UL 60950-1 CSA C22.2 No. 60950-1, CSA C22.2 No. 60950-1 EMI Standard EN55011, FCC and VCCI Class B (radiated and conducted) EMC Performance EN61000-3-2: Harmonic distortion, Class A and D EN61000-3-3: Line flicker EN61000-4-2: ESD, ±15 KV air and ± 8KV contact EN61000-4-3: Radiated immunity, 10V/m EN61000-4-4: Fast transient/burst, ±2KV EN61000-4-5: Surge, ±1 KV diff., ±2 KV com. EN61000-4-6: Conducted immunity, 10Vrms EN61000-4-8: Magnetic field immunity, 30 A/m EN61000-4-11: Voltage dip immunity, 30% reduction for 500ms, and 100% reduction for 10ms *Consult with TT Electronics for information on additional country safety approvals

© TT Electronics plc General Note All data sheets are subject to change without notice. SL-xxx-xxx ISS.6 22/07/2020 Page: 4 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Diagrams

© TT Electronics plc General Note All data sheets are subject to change without notice. SL-xxx-xxx ISS.6 22/07/2020 Page: 5 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Diagrams