PM070WL1 AZDISPLAYS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 23
Technical content
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written pe rmission of Prime View International Co., Ltd. Page:1 Version : 0.2 TECHNICAL SPECIFICATION MODEL NO. : PM070WL1 Customer’s Confirmation C u s t o m e r B y PVI’s Confirmation Dep FAE Panel Design Electronic Design Mechanical Design Product Verification Prepared by SIGN Preliminary FOR MORE INFORMATION: AZ DISPLAYS, INC.
75 COLUMBIA, ALISO VIEJO, CA, 92656
Http://www.AZDISPLAYS.com
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written pe rmission of Prime View International Co., Ltd. Page:2 TECHNICAL SPECIFICATION
CONTENTS
NO. ITEM PAGE - Cover 1 - Contents 2
1 Application 3
2 Features 3
3 Mechanical Specifications 3
4 Mechanical Drawing of TFT-LCD module 4
5 Input Terminals 6
6 Absolute Maximum Ratings 8
7 Electrical Characteristics 8
8 Pixel Arrangement 10
9 Display Color and Gray Scale Reference 11
10 Block Diagram 12
11 Interface Timing 13
12 Power On Sequence 16
13 Optical Characteristics 16
14 Handling Cautions 20
15 Reliability Test 21
16 Packing Diagram 22
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written pe rmission of Prime View International Co., Ltd. Page:3 1.Application This data sheet applies to a color TFT LCD module, PM070WL1. The application of panel are OA product, portable DVD, car TV(must use Analog to Digital driving board), which requires high quality flat panel display. Prime View assume no responsibility for any damage resulting from the use of the device which dose not comply with the instructions and the precautions in these specification sheet. 2. Features . Wide VGA (800*480 pixels) resolution . Amorphous silicon TFT LCD panel with back-light unit . Pixel in stripe configuration . Thin and light weight . Display Colors：262,144 colors . Optimum Viewing Direction：6 o’clock . 3.3V LVDS interface standard: THC63LVDF64A as receiver . +3.3V DC supply voltage for TFT LCD panel driving . Backlight driving DC/AC inverter not included in this module . Long Life Lamp . Wide viewing angle 3.Mechanical Specifications Parameter Specifications Unit Screen Size 7.0(diagonal) inch Display Format 800×(R, G, B)×480 dot Display Colors 262,144 Active Area 152.4(H)×91.44(V) mm Pixel Pitch 0.190(H)×0.190(V) mm Pixel Configuration Stripe Outline Dimension 166.3(W)×105.3 (H)×10.8 (typ.) (D) mm Weight TBD g Back-light CCFL, 1 tube Surface treatment Anti-glare and Wide View Film Display mode Normally white
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written pe rmission of Prime View International Co., Ltd. Page:4 4.Mechanical Drawing of TFT-LCD Module Outline Drawing : Front View (unit mm)
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written pe rmission of Prime View International Co., Ltd. Page:5 Outline Drawing : Rear View (unit mm)
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written pe rmission of Prime View International Co., Ltd. Page:6 5.Input Terminals 5-1) TFT-LCD Panel Driving Connector type: DFL19K-20P-1H (56)(HRS) Pin No. Symbol Function Remark 1 Vcc +3.3V Power Supply 2 Vcc +3.3V Power Supply
3 GND Ground
4 GND Ground
5 INO- LVDS receiver signal channel 0
6 INO+ LVDS receiver signal channel 0
7 GND Ground
8 IN1- LVDS receiver signal channel 1
9 IN1+ LVDS receiver signal channel 1
10 GND Ground
11 IN2- LVDS receiver signal channel 2
12 IN2+ LVDS receiver signal channel 2
13 GND Ground
14 CLK- LVDS receiver signal clock
15 CLK+ LVDS receiver signal clock
16 GND Ground
17 NC No connection
18 NC No connection
19 GND Ground
20 GND Ground
LVDS Interface Block Diagram Graphic Controller Circuit TIN0~TIN5 TIN6~TIN11 TIN12~TIN17 TIN18 TIN19 TIN20 CLK IN R0~R5 G0~G5 B0~B5 Hsync Vsync DENB CLK TTL parallel to LVDS PLL THC63LVDM63A LVDS to TTL parallel PLL IN0- IN0+ RxOUT0~RxOUT5 RxOUT6~RxOUT11 RxOUT12~RxOUT17 RxOUT18 RxOUT19 RxOUT20 CLK OUT LCD Internal Circuit IN1- IN1+ IN2- IN2+ CLK- CLK+ PM070WL1 module side Customer system side THC63LVDF64A
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written pe rmission of Prime View International Co., Ltd. Page:7 Recommended Transmitter (THC63LVDM63A Thine) to PM070WL1 interface Assignment: Input terminal of THC63LVDM63A Graphic controller output signal Output signal symbol To PM070WL1 interface terminal (Symbol) Symbol No. Symbol Function TIN0 44 R0 Red pixel data (LSB) TIN1 45 R1 Red pixel data TIN2 47 R2 Red pixel data Tout0- No.5 : IN0- TIN3 48 R3 Red pixel data TIN4 1 R4 Red pixel data Tout0+ No.6 : IN0+ TIN5 3 R5 Red pixel data(MSB) TIN6 4 G0 Green pixel data (LSB) TIN7 6 G1 Green pixel data TIN8 7 G2 Green pixel data TIN9 9 G3 Green pixel data Tout1- No.8 : IN1- TIN10 10 G4 Green pixel data TIN11 12 G5 Green pixel data(MSB) Tout1+ No.9 : IN1+ TIN12 13 B0 Blue pixel data(LSB) TIN13 15 B1 Blue pixel data TIN14 16 B2 Blue pixel data TIN15 18 B3 Blue pixel data TIN16 19 B4 Blue pixel data Tout2- No.11 : IN2- TIN17 20 B5 Blue pixel data(MSB) TIN18 22 Hsync Horizontal Synchronous Signal Tout2+ N0.12 : IN2+ TIN19 23 Vsync Vertical Synchronous Signal TIN20 25 DENB Compound Synchronization signal CLK in 26 CLK Data sampling clock TCLK out- TCLK out+ No.14 : CLK - No.15 : CLK+ DENB input signal. If customer wanted to off the DENB mode , you must keep the DENB always High or Low. (tc: the period of sampling clock) 1056 tc DENB 800 tc
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written pe rmission of Prime View International Co., Ltd. Page:8 6.Absolute Maximum Ratings: GND=0V, Ta=25 ℃ Parameters Symbol MIN. MAX. Unit Remark Supply Voltage V CC -0.3 +4.0 V Input Signals Voltage V IN -0.3 V CC +0.3 V Note 6-1 Backlight Driving Voltage V L - 2000 V Backlight Driving Frequency F L 0 100 KHz Storage Temperature T ST -20 +70 ℃ Note 6-2 Operating Temperature T OP 0 +60 ℃ Note 6-1: LVDS signal Note 6-2: Humidity : 90% RH Max. at Ta ≤ 40℃. Maximum wet-bulb temperature is at 39 ℃or less at Ta > 40℃and no condensation. 7.Electrical Characteristics 7-1) Recommended Operating Conditions: GND = 0V ，Ta = 25℃ Item Symbol Min. Typ. Max. Unit Remark Supply Voltage VCC 3.0 3.3 3.6 V Current Dissipation I CC - 350 450 mA Note 7-1 LVDS Differential input high threshold V TH - - 100 mV Note 7-2 LVDS Differential input low threshold V TL -100 - - Note 7-1 : To test the current dissipation of VCC, using the “color bars” testing pattern shown as below 1 2345678 1. White 2. Yellow 3. Cyan 4. Green 5. Magenta 6. Red 7. Blue 8. Black Idd current dissipation testing pattern Note7-2 : Please refers to THC63LVDF64A specification by THINE. This LCD module conforms to LVDS standard.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written pe rmission of Prime View International Co., Ltd. Page:9 7-2) Recommended Driving Condition for Back Light T a = 2 5 ℃ Parameter Symbol Min. Typ. Max. Unit Remark Lamp Voltage V L 522 580 638 V I L=6mA Lamp Current IL 4 6 7 mA Note 7-3 Lamp Frequency PL 45 60 80 KHz Note 7-4 Starting Voltage (25℃) (Reference Value) Vs - - 1090 Vrms Note 7-5 Starting Voltage (0℃) (Reference Value) Vs - - 1420 Vrms Note 7-5 Note 7-3 In order to satisfy the quality of B/L, no matter use what kind of inverter, the output lamp current must between Min. and Max. to avoid the abnormal display image caused by B/L. Note 7-4: The waveform of lamp driving voltage should be as closed to a perfect sine wave as possible. Note 7-5 The” Max of starting voltage ” means the minimum voltage of inverter to turn on the CCFL. and it should be applied to the lamp for more than 1 second to start up. Otherwise the lamp may not be turned on. 7-3) Backlight driving & Power Consumption Pin No Symbol Description Remark
1 VL1 Input terminal (Hi voltage side)
2 VL2 Input terminal (Low voltage side) Note 7-6
Note 7-6 : Low voltage side of backlight inverter connects with ground of inverter circuits.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written pe rmission of Prime View International Co., Ltd. Page:10 8. Pixel Arrangement The LCD module pixel arrangement is the stripe. R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B rd Line 2 nd Line st Line 480 th Line 479 th Line 478 th Line R G B R G B R G B R G B 1 st Pixel 800 th Pixel
1 Pixel = R G B
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written pe rmission of Prime View International Co., Ltd. Page:11 9. Display Color and Gray Scale Reference Input Color Data Color Red Green Blue R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red (63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 Green (63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 Basic Blue (63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 Colors Cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 Magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 Yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Red (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red (01) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 Red (02) 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 D a r k e r Brighter Red (61) 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 Red (62) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 Red (63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 Green (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Green (01) 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 Green (02) 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 D a r k e r Brighter Green (61) 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0 Green (62) 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 Green (63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 Blue (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Blue (01) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 Blue (02) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 D a r k e r Brighter Blue (61) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 Blue (62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 Blue (63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written pe rmission of Prime View International Co., Ltd. Page:12 10. Block Diagram 10-2) TFT-module Block Diagram Timing Controller (PVI-2003A) DC-DC Converter Gamma Generator Vcom Generator FPC Source Driver IC Gate Driver IC 7.0"WVGA TFT-LCD Panel SYSTEM Video Control VDD1 VDD2 Gamma Vcom VGG / VEE THC63LVDF64A User signal input +3.3V
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written pe rmission of Prime View International Co., Ltd. Page:13 11. Interface Timing 11.1) Timing Parameters Symbol Min. Typ. Max. Unit Remark Power supply VCC 3.0 3.3 3.6 V 1/tc - 32 - MHz CLK Frequency tc - 31.25 - ns - 33 - us Period Hp - 1056 - tc Display period Hdp - 800 - tc Pulse width Hpw - 128 - tc Back-porch Hbp - 86 - tc Front-porch Hfp - 42 - tc Hpw+Hbp - 214 - tc Hsync-CLK Hhc 10 - Tc-10 ns HSYNC Vsync-Hsync Hvh 0 0 200 tc - 17.325 - ms Period Vp - 525 - Hp Display period Vdp - 480 - Hp Pulse width Vpw - 2 - Hp Back-porch Vbp - 33 - Hp Front-porch Vfp - 10 - Hp VSYNC Vpw+Vbp - 35 - Hp Horizontal scanning period T1 860 1056 1064 tc Horizontal display period T2 - 800 - tc Vertical display period T3 - 480 - T1 DENB Frame cycling period T4 520 525 800 T1 CLK-DATA Dcd 10 - - ns R,G ,B DATA-CLK Ddc 8 - - ns
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written pe rmission of Prime View International Co., Ltd. Page:14 11.2) The Timing Diagram a. Input signal range a.1 a.2 HSYNC timing a.3 CLK,HSYNC relationship R,G,B Vaild data tc Ddc Dcd R05-R00 G05-G00 B05-B00 DENB HSYNC Hp Hpw Hbp Hdp Hfp Hhc CLK HSYNC
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written pe rmission of Prime View International Co., Ltd. Page:15 a.4 HSYNC, VSYNC relationship a.5 VSYNC timing a.6 DENB timing DENB Line 1 Line 480 Line 2 Line 1
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written pe rmission of Prime View International Co., Ltd. Page:16 12. Power On Sequence 1. 0 ＜t1≦20ms 2. 0 ＜t2≦50ms 3. 0 ＜t3≦1s 13. Optical Characteristics 13-1) Specification: Ta=25℃ Parameter Symbol Condition MIN. TYP . MAX. Unit Remarks Horizontal θ ±55 ±60 - deg θ(to 12 o’clock) 35 40 - deg Viewing Angle Vertical θ(to 6 o’clock) CR＞10 50 55 - deg Note 13-1 Contrast Ratio CR θ=0° 250 400 - - Note 13-2 Rise Tr - 15 30 ms Response time Fall Tf θ=0° - 25 50 ms Note 13-3 Brightness L θ=0°/φ=0 300 330 - cd/㎡ Luminance Uniformity U - 70 75 - % Note 13-4 Lamp Life Time - 25000 - - hr At 6mA Cross Talk - θ=0° - - 3.5 % Note 13-5 All the optical measurement shall be executed 30 minutes after backlight being turn-on. The optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shows as following figure. VCC Logic Signal
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written pe rmission of Prime View International Co., Ltd. Page:17 Photometer (TOPCON BM-5A or BM-7 fast) 500 mm +/- 50 mm TFT-LCD module DC/AC Inverter Field = 1° Optical characteristics measuring configuration Topcon BM-5A or BM-7 fast luminance meter 1°field of view is used in the testing (after 30 minutes’ operation). The typical luminance value is measured at lamp current 6.0 mA. Note 13-1: The definitions of viewing angles are as follow. Note 13-2: The definition of contrast ratio CR Luminance at gray level 63 Luminance at gray level 0= Note 13-3: Definition of Response Time Tr and Tf:
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written pe rmission of Prime View International Co., Ltd. Page:18 100% 90% 10% White White Brightness Black Tr Tf Note 13-4: The uniformity of LCD is defined as The Minimum Brightness of the 9 testing Points U = The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast(TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The test pattern is white (Gray Level 63). 1/6 1/6 2/6 2/6
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written pe rmission of Prime View International Co., Ltd. Page:19 YA: Brightness of Pattern A YB: Brightness of Pattern B Luminance meter : BM 5A or BM-7 fast (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module Pattern A (Gray Level 31) Pattern B (Gray Level 31, central black box exclusive) : Measuring Point (A and B are at the same point.) YA YB 1/3 1/3 1/3 Black (Gray Level 0) YA-YBNote 13-5: Cross Talk (CTK) = YA ×100%
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written pe rmission of Prime View International Co., Ltd. Page:20 14. Handling Cautions 14-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circuit surely. If the connection is not perfect, some following problems may happen possibly. 1.The noise from the backlight unit will increase. 2.The output from inverter circuit will be unstable. 3.In some cases a part of module will heat. c) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. d) Protective film (Laminator) is applied on surface to protect it against scratches and dirts. It is recommended to peel off the laminator before use and taking c a r e o f s t a t i c e l e c t r i c i t y . 14-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 14-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 14-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written pe rmission of Prime View International Co., Ltd. Page:21 15. Reliability Test No Test Item Test Condition Remark
1 High Temperature Storage Test Ta = +80℃, 240 hrs
2 Low Temperature Storage Test Ta = -30℃, 240 hrs
3 High Temperature Operation Test Ta = +70℃, 240 hrs
4 Low Temperature Operation Test Ta = -20℃, 240 hrs
5 High Temperature & High Humidity
Ta = +60℃, 90%RH, 240 hrs (No Condensation)
6 Thermal Cycling Test
(non-operating) -30℃Æ+80℃, 100 Cycles 30min 30min
7 Vibration Test
(non-operating) Frequency：10 ~ 55 HZ , Amplitude：1 mm Sweep time: 11 min Test Period: 6 Cycles for each direction of X, Y, Z
8 Shock Test
(non-operating) 100G, 6ms Direction: ±X, ±Y, ±Z Cycle: 3 times
9 Electrostatic Discharge Test
(non-operating) 200pF, 0Ω ±200V 1 time / each terminal Ta: ambient temperature Note : The protective film must be removed before temperature test. [Criteria] 1. Main LCD should normally work under the normally condition no defect of function, screen quality and appearance (including : mura ,line defect ,no image). 2. After the temperature and humidit y test, the luminance and CR (Contrast ratio) ,should not be lower than minimum of specification. 3. After the vibration and shock test , can’t be find chip ,broken.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written pe rmission of Prime View International Co., Ltd. Page:22 16. Packing Diagram TBD
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written pe rmission of Prime View International Co., Ltd. Page:23
Revision History
Rev. Issued Date Revised Contents 0.1 Dec. 14 , 2005 Preliminary 0.2 Mar .22 ,2006 Modify: 1. Delete touch panel in PM070WL1. 2. Modify i nterface Timing.