PLT5518FB_P

PLT5518FB_P OSRAM | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 18

Technical content

PLT5 518FB_P DATASHEETDATASHEET 1 | Version 1.0 | 2024-01-30 www.osram-os.com PLT5 518FB_P Datasheet Published by ams-OSRAM AG Tobelbader Strasse 30, 8141 Premstaetten, Austria Phone +43 3136 500-0 ams-osram.com © All rights reserved

PLT5 518FB_P DATASHEETDATASHEET 2 | Version 1.0 | 2024-01-30 Metal Can TO56 PLT5 518FB_P Green Laser Diode in TO56 Package

Applications

• Appliances & Tools - Entertainment - Functional Illumination - Outdoor & Industrial Lighting - Projection

Features

• Optical output power (continuous wave): 30 mW (T C = 25°C) - Typical emission wavelength: 520 nm - Efficient radiation source for cw and pulsed operation - Single mode semiconductor laser - High modulation bandwidth - TO56 package with photo diode

PLT5 518FB_P DATASHEETDATASHEET 3 | Version 1.0 | 2024-01-30

Ordering Information

Type Peak output power Ordering Code typ. Popt PLT5 518FB_P 30 mW Q65113A4964

PLT5 518FB_P DATASHEETDATASHEET 4 | Version 1.0 | 2024-01-30 Maximum Ratings Parameter Symbol Values Operating temperature Top min. max. -20 °C 60 °C Storage temperature Tstg min. max. -40 °C 85 °C Peak output power Tcase = 25 °C Popt max. 35 mW Reverse voltage 1) Tcase = 25 °C VR max. 2 V Soldering temperature tmax = 10 sec TS max. 260 °C Operation outside these conditions may damage the device. Operation at the maximum ratings influences lifetime.

PLT5 518FB_P DATASHEETDATASHEET 5 | Version 1.0 | 2024-01-30 Characteristics Popt = 30 mW (B1 - B3); Tc = 25 °C Parameter Symbol Values Operating current 2) Iop typ. max. 80 mA 100 mA Operating voltage 3) Vop typ. max. 5.6 V 6.5 V Peak wavelength 4)5) λpeak min. typ. max. 510 nm 520 nm 530 nm Spectral bandwidth (FWHM) ∆λ typ. 1 nm Beam divergence (FWHM) parallel to pn-junction Θ‖ min. typ. max. 6 ° 8 ° 10 ° Beam divergence (FWHM) perpendicular to pn-junction Θ┴ min. typ. max. 19 ° 22 ° 25 ° Threshold current Ith typ. max. 30 mA 45 mA TE polarization PTE typ. 100:1 Modulation frequency f min. 100 MHz Monitor current 6)7) Im typ. 55 µA

PLT5 518FB_P DATASHEETDATASHEET 6 | Version 1.0 | 2024-01-30 Wavelength Groups Group Peak wavelength 4) Peak wavelength 4) min. max. λpeak λpeak B1 510 nm 515 nm B2 515 nm 520 nm B3 520 nm 530 nm

PLT5 518FB_P DATASHEETDATASHEET 7 | Version 1.0 | 2024-01-30 Relative Spectral Emission 8), 9) Popt = ƒ (λ); Group (B2) Beam Divergence 9) Popt = f (Θ)

PLT5 518FB_P DATASHEETDATASHEET 8 | Version 1.0 | 2024-01-30 Forward Voltage 8), 9) VF = f (IF) Optical Output Power 8), 9) Popt = f (IF)

PLT5 518FB_P DATASHEETDATASHEET 9 | Version 1.0 | 2024-01-30 Threshold Current 8) Ith = f (TC)

PLT5 518FB_P DATASHEETDATASHEET 10 | Version 1.0 | 2024-01-30 Dimensional Drawing 10) Further Information: Approximate Weight: 313.0 mg ESD advice: ATTENTION – Observe Precautions For Handling – Electrostatic Sensitive Device

PLT5 518FB_P DATASHEETDATASHEET 11 | Version 1.0 | 2024-01-30 Electrical Internal Circuit Pin Description PIN 1 LD Cathode PIN 2 LD Anode, PD Cathode (case) PIN 3 PD Anode

PLT5 518FB_P DATASHEETDATASHEET 12 | Version 1.0 | 2024-01-30 TTrraayy 11) 200 pieces per Tray TTrraayy 11) 100 pieces per Tray

PLT5 518FB_P DATASHEETDATASHEET 13 | Version 1.0 | 2024-01-30 Barcode-Product-Label (BPL) Schematic Transportation Box 10) OHA02886 PACKVAR: R077Additional TEXT P-1+Q-1 Multi TOPLED Muster OSRAM Opto Semiconductors (6P) BATCH NO: (X) PROD NO: (9D) D/C: 11(1T) LOT NO: 21002199 123GH1234 0 24 5 (Q)QTY: 2000 0144 (G) GROUP:

260 C RT

240 C R

220 C R

MLBin3:Bin2: Q-1-20 Bin1: P-1-20 LSY T676 2 2a Temp ST R18 DEMY Barcode label Original packing label Box

PLT5 518FB_P DATASHEETDATASHEET 14 | Version 1.0 | 2024-01-30 DDiimmeennssiioonnss ooff TTrraannssppoorrttaattiioonn BBooxx At pieces per Tray Width Length Height 200 170 ± 5 mm 270 ± 5 mm 45 ± 5 mm 100 103 ± 5 mm 128 ± 5 mm 25 ± 5 mm Notes Depending on the mode of operation, these devices emit highly concentrated visible and non visible light which can be hazardous to the human eye. Products which incorporate these devices have to follow the safety precautions given in IEC 60825-1. Subcomponents of this device contain, in addition to other substances, metal filled materials including silver. Metal filled materials can be affected by environments that contain traces of aggressive substances. There- fore, we recommend that customers minimize device exposure to aggressive substances during storage, production, and use. Devices that showed visible discoloration when tested using the described tests above did show no performance deviations within failure limits during the stated test duration. Respective failure limits are described in the IEC60810. Important notes of operation for laser diode a) Electrical operation OSRAMs laser diodes are designed for maximum performance and reliability. Operating the laser diode above the maximum rating even for very short periods of time can damage the laser diode or reduce its lifetime. The laser diode must be operated with a suitable power supply with minimized electrical noise. The laser diode is very sensitive to electrostatic discharge (ESD). Proper precautions must be taken. b) Mounting instructions In order to maintain the lifetime of the laser diode proper heat management is essential. Due to the design of the laser diode heat is dissipated only through the base plate of the diode‘s body. A proper heat conduct- ing interconnection between the diodes base plate and the heat sink must be maintained. For further application related information please visit https://ams-osram.com/support/application-notes

PLT5 518FB_P DATASHEETDATASHEET 15 | Version 1.0 | 2024-01-30 Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version on our website. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Product and functional safety devices/applications or medical devices/applications Our components are not developed, constructed or tested for the application as safety relevant component or for the application in medical devices. Our products are not qualified at module and system level for such application. In case buyer – or customer supplied by buyer – considers using our components in product safety devices/ applications or medical devices/applications, buyer and/or customer has to inform our local sales partner immediately and we and buyer and /or customer will analyze and coordinate the customer-specific request between us and buyer and/or customer.

PLT5 518FB_P DATASHEETDATASHEET 16 | Version 1.0 | 2024-01-30 Glossary 1) Reverse Operation: This product is intended to be operated applying a forward current within the specified range. Applying any reverse bias shall be avoided. 2) Operating/Forward current: IF is measured with an internal reproducibility of ±0.5 mA (acc. to GUM with a coverage factor of k = 3). 3) Operating/Forward voltage: VF is measured with an internal reproducibility of ±0.05 V (acc. to GUM with a coverage factor of k = 3). 4) Wavelength: The wavelengths are measured with a tolerance of ±0.5 nm. 5) Wavelength: λpeak is measured with an internal reproducibility of ±0.3 nm (acc. to GUM with a coverage factor of k = 3). 6) Monitor current: Monitor current refers to a reverse voltage of VRPD = 5 V. Monitor current is for short time power reference purpose only. Not guaranteed for accuracy. 7) Monitor current: For reference only. 8) Typical Values: Due to the special conditions of the manufacturing processes of semiconductor devices, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 9) Testing temperature: TA = 25 °C (unless otherwise specified). 10) Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with ±0.1 and dimensions are specified in mm.

PLT5 518FB_P DATASHEETDATASHEET 17 | Version 1.0 | 2024-01-30

Revision History

1.0 2024-01-30 Initial Version Glossary

PLT5 518FB_P DATASHEETDATASHEET 18 | Version 1.0 | 2024-01-30 Published by ams-OSRAM AG Tobelbader Strasse 30, 8141 Premstaetten, Austria Phone +43 3136 500-0 ams-osram.com © All rights reserved