PLT01 SJM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

  • 400 to 1700MHz
  • Gain 15.4dB @ 700MHz
  • P1dB 17.3dBm @ 700MHz
  • OIP3 19.6dBm @ 700MHz
  • Lead-free / Green /
  • Compliant SOT-363 Package

Description

The PLT01 is a high performancepHEMTMMIC Amplifier. The PLT01 featuresare highgain,low noise,low powerconsumption, widebandoperationand high reliability,ideal for mobile device receiver. The PLT01 operatesfroma singlevoltagesupplyand no bias resistoris required. It providesstableperformanceover wide temperaturerange by internal temperaturecompensationbias circuit. IthasintegratedESDprotectiondiodethatprovideshighESD protectionperformance. Thisdeviceis a generalpurposeamplifier thatoffershighdynamicrangeina lowcostsurface-mountedplastic SOT-363package.Alldevicesare100% RFandDCtested. Specification s 1) Test Conditions : T=25°C, Supply Voltage=3V, 50ohm System 2) OIP3 measured with two tones at an output power of 0dBm/tone separated by 1MHz Absolute Maximum Ratings Parameter Rating Unit Device Voltage 10 V Device Current 45 mA RF Power Input 17 dBm Storage Temperature -55 to 150 °C Ambient Operating Temperature -40 to 85 °C Junction Temperature 187 °C ESD/MSL Functional Diagram 1) Stresses above the maximum values listed have may cause permanent damage to the device. 2) MTTF is more than 100 years.

Applications

  • Mobile
  • Microphone receiver
  • GPS
  • Repeater
  • Automotive
  • Military Parameter Units Min. Typ. Max. Test Frequency MHz 700 1575 S21 dB 15.4 13.7 S11 dB -12.7 -15.8 S22 dB -33.5 -15.1 OIP3 2) dBm 19.6 17.6 P1dB dBm 17.3 18.6 NF dB 1.42 1.50 V / I V / mA 2V 3V / 8mA 6V Rth °C/W 72 RF IN GND 1,2,4,5 RF OUT / Bias 6

http://www.prewell.com 2 Gain Block SJM PREWELL PLT01 Products and product information are subject to change without notice.Version 16 -5 -3 -1 1 3 5 OIP3 (dBm) Output Power (dBm) 400MHz 700MHz 1000MHz 400 500 600 700 800 900 1000 P1 (dBm) Frequency (MHz) 25°C -40°C 85°C P1dB vs. Frequency 400 500 600 700 800 900 1000 -35 -30 -25 -20 -15 -10 S22 (dB) Frequency (MHz) 25°C -40°C 85°COutput Return Loss vs. Frequency 400 500 600 700 800 900 1000 -20 -16 -12 S11 (dB) Frequency (MHz) 25°C -40°C 85°C Input Return Loss vs. Frequency 400 500 600 700 800 900 1000 S21 (dB) Frequency (MHz) 25°C -40°C 85°C Gain vs. Frequency 400 500 600 700 800 900 1000 OIP3 (dBm) Frequency (MHz) 25°C -40°C 85°C OIP3 vs. Output PowerOIP3 vs. Frequency Parameters Units 400MHz 700MHz 1000MHz S21 dB 15.6 15.4 14.7 S22 dB -14.6 -33.5 -22.6 P1dB dBm 17.1 17.3 17.3 OIP3 2) dBm 19.1 19.6 20.5 NF dB 1.32 1.42 1.39 Typical RF Performance for 400MHz ~ 1000MHz Tuned Application Circuit Supply Bias Voltage = 3V, Current= 8mA Note 1. Measurement for our datasheet was made on 0.8mm thick FR-4 Board and 50Ω microstrip line Note 2. Increasing supply voltage also increases the current Note 3. It is recommended to use RBias for more than 6V 1) Test Conditions : T=25°C, Supply Voltage=3V, 50Ω System 2) OIP3 is measured with two tones, 1MHz Spacing, 0dBm per Tone at Output RF IN 1nF 39nH 1nF Vdd RF OUT2.2nF RBias 3.9nH

http://www.prewell.com 3 Gain Block SJM PREWELL PLT01 Products and product information are subject to change without notice.Version 16 400 500 600 700 800 900 1000 NF (dB) Frequency (MHz) 25°C NF vs. Frequency 0 1 2 3 4 5 Id (mA) Vd (V) 25°C Id vs. Vd -20 -15 -10 -5 0 5 10 Output Power (dBm) / Gain (dB) Input Power (dBm) Output P1dB Gain Output Power / Gain vs. Input Power @ 400MHz -20 -15 -10 -5 0 5 10 Output Power (dBm) / Gain (dB) Input Power (dBm) Output P1dB Gain Output Power / Gain vs. Input Power @ 500MHz -20 -15 -10 -5 0 5 10 Output Power (dBm) / Gain (dB) Input Power (dBm) Output P1dB Gain Output Power / Gain vs. Input Power @ 600MHz -20 -15 -10 -5 0 5 10 Output Power (dBm) / Gain (dB) Input Power (dBm) Output P1dB Gain Output Power / Gain vs. Input Power @ 700MHz -20 -15 -10 -5 0 5 10 Output Power (dBm) / Gain (dB) Input Power (dBm) Output P1dB Gain Output Power / Gain vs. Input Power @ 800MHz -20 -15 -10 -5 0 5 10 Output Power (dBm) / Gain (dB) Input Power (dBm) Output P1dB Gain Output Power / Gain vs. Input Power @ 1000MHz

http://www.prewell.com 4 Gain Block SJM PREWELL PLT01 Products and product information are subject to change without notice.Version 16 -5 -3 -1 1 3 5 OIP3 (dBm) Output Power (dBm) 1450 1500 1550 1600 1650 1700 OIP3 (dBm) Frequency (MHz) 1450 1500 1550 1600 1650 1700 P1 (dBm) Frequency (MHz) 1450 1500 1550 1600 1650 1700 -20 -16 -12 S22 (dB) Frequency (MHz) 1450 1500 1550 1600 1650 1700 S21 (dB) Frequency (MHz) 1450 1500 1550 1600 1650 1700 -20 -16 -12 S11 (dB) Frequency (MHz) P1dB vs. FrequencyOutput Return Loss vs. Frequency Input Return Loss vs. Frequency Gain vs. Frequency OIP3 vs. Output Power_1575MHzOIP3 vs. Frequency Note 1. Measurement for our datasheet was made on 0.8mm thick FR-4 Board and 50Ω microstrip line Note 2. Increasing supply voltage also increases the current Note 3. It is recommended to use RBias for more than 6V Parameters Units 1450MHz 1575MHz 1700MHz S21 dB 14.0 13.7 13.3 S11 dB -14.7 -15.8 -12.9 S22 dB -16.8 -15.1 -13.9 P1dB dBm 17.5 17.6 17.4 OIP3 2) dBm 18.6 18.6 18.7 NF dB 1.5 1.5 1.6 1) Test Conditions : T=25°C, Supply Voltage=3V, 50Ω System 2) OIP3 is measured with two tones, 1MHz Spacing, 0dBm per Tone at Output Typical RF Performance for 1450MHz ~ 1700MHz Tuned Application Circuit Supply Bias Voltage = 3V, Current= 8mA RF IN 100pF 22nH 1nF Vdd RF OUT100pF RBias 2.7nH 1.5pF

http://www.prewell.com 5 Gain Block SJM PREWELL PLT01 Products and product information are subject to change without notice.Version 16 1450 1500 1550 1600 1650 1700 NF (dB) Frequency (MHz) -20 -15 -10 -5 0 5 10 -10 Output Power (dBm) / Gain (dB) Input Power (dBm) Output P1dB Gain -20 -15 -10 -5 0 5 10 -10 Output Power (dBm) / Gain (dB) Input Power (dBm) Output P1dB Gain -20 -15 -10 -5 0 5 10 -10 Output Power (dBm) / Gain (dB) Input Power (dBm) Output P1dB Gain Output Power / Gain vs. Input Power @ 1450MHzNF vs. Frequency Output Power / Gain vs. Input Power @ 1575MHz Output Power / Gain vs. Input Power @ 1700MHz

http://www.prewell.com 6 Gain Block SJM PREWELL PLT01 Products and product information are subject to change without notice.Version 16 Mounting Instructions 1 Use a large ground pad area with many plated through-holes as shown. 2 We recommend 1 oz copper minimum. 3 Measurement for our data sheet was made on 0.8mm thick FR-4 Board. 4 RF trace width depends on the board material and construction. 5 Add mounting screws near the part to fasten the board to a heatsink. 6 Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. Lead-free /RoHS Compliant / Green SOT-363 Package Outline Land Pattern Evaluation Board Layout (40x40) Package Outline f .23 Plated Thru Ground Vias 0.8 (0.032) 2.08 (0.0832)0.8 (0.032) 0.94 (0.0376) 3.38 (0.1352) 2.68 (0.1072) 1.3 (0.052) 0.38 (0.0152) REF. DIMENSIONS (mm) Min. Max. E 1.15 1.35 D 1.85 2.25 HE 2.00 2.30 A 0.80 1.00 A2 0.80 0.91 A1 0.00 0.09 e 0.65 BSC b 0.15 0.30 c 0.08 0.25 L 0.21 0.41