PLDM8-0.5 RHOMBUS-IND | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
For other values & Custom Designs, contact factory.Specifications subject to change without notice.
15801 Chemical Lane, Huntington Beach, CA 92649-1595
Tel: (714) 898-0960 • Fax: (714) 896-0971 PLDM 1/98 Rhombus Industries Inc. FAST / TTL Buffered I/O 4-Bit Programmable Delay Modules GENERAL: For Operating Specifications and Test Conditions, see Tables I and VI on page 5 of this catalog. Delays specified for the Leading Edge. Buffered input and output. Supply Current, I .300 (7.62) .600 (15.24) .300 (7.62) .800 (20.32) 32 26 24 71 3 1 63 171819 .500 (12.70) .600 (15.24) 1.650 MAX (41.91) MAX .030 (0.76) TYP. .050 (1.27) TYP. .295 (7.49) .300 (7.62) .400 (10.16) MAX. .010 (0.25) TYP. .100 (2.54) TYP. .020 (0.51) TYP. .120 (3.05) MIN. Dimensions in Inches (mm) Electrical Specifications at 25O C ENABLE input (Pin 15) is active low. Output will be disabled (remain low) when " E " is high. Electrical Specifications at 25O C 4-Bit TTL Part Number Delay per Step (ns) Error ref. to 0000 (ns) Initial Delay (ns) Referenced to "0000" - Delay (ns) per Program Setting (P4*P3*P2*P1) 0000 0000 0001 0010 0011 0100 0101 0110 0111 1000 1001 1010 1011 1100 1101 1110 1111 4-Bit FAST Part Number Delay per Step (ns) Error ref. to 0000 (ns) Initial Delay (ns) Referenced to "0000" - Delay (ns) per Program Setting (P4*P3*P2*P1) 0000 0000 0001 0010 0011 0100 0101 0110 0111 1000 1001 1010 1011 1100 1101 1110 1111 FAST / TTL 4-Bit SchematicCUMULATIVE TOLERANCES : "Error" Tolerance is for Programmed Delays Referenced to Initial Delay, Setting "0000." For example, the setting "1111" delay of PLDM15-1 is 15.0 ± 1.0 referenced to "0000," and 30.0 ± 2.0 referenced to the input. GND OUT 4-Bit Programmable Delay Line Input Buffer Vcc Vcc 24 171819 IN GND E Output Buffer