PLC764-WCG04 P-TEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Features
- 3mm Lens
- High Luminous Output
- High Current Operation
- RoHS Compliant Mechanical Dimensions Notes: 1. Dimensions in millimeters [inch], and tolerance is ±0.25 [.010] unless otherwise noted. 2. Specifications subject to change without notice
www.p-tec.net 101514 Rev0 JAS Page 2 of 6 Device Selection Guide Chip Model Number Material Emitting Color PLC764-WCG04 InGaN Green Absolute Maximum Ratings at Ta=25°C Electrical and Optical Characteristics at Ta=25°C Rating Parameter Symbol G Unit Power Dissipation P AD 160 mW Continuous Forward Current I AF 40 mA Peak Current (duty cycle 1/10, 1KHz) I PF 100 mA Reverse Voltage VR 5 V Operating Temperature Topr -30~+80 °C Storage Temperature Tstg -40~+100 °C Soldering Conditions Max. 260℃ for 5 sec Max.(3mm from the epoxy body) Parameter Symbol Min. Typ. Max. Unit Condition Forward Voltage VF -- 3.5 4.0 V Luminous Flux Iv 3500 5000 -- mlm Dominant Wavelength λD -- 525 -- nm Viewing Angle 2θ1/2 -- 50 -- deg IF=30mA Reverse Current I R -- -- 50 μA VR=5V
www.p-tec.net 101514 Rev0 JAS Page 3 of 6 Luminous Flux Rank Limits ( IF = 30mA ) Unit: mlm Code Min. Max. G 3500 4000 H 4000 5000 J 5000 6000 K 6000 7000 Color Rank Limits ( IF = 30mA ) Unit: mlm Code Min. Max. TG1 515 520 TG2 520 525 TG3 525 530 TG4 530 535 Forward Voltage Rank Limits ( IF = 30mA ) Unit: V Code Min. Max. J 3.0 3.2 K 3.2 3.4 L 3.4 3.6 M 3.6 3.8 N 3.8 4.0 Notes: 1. Tolerance of measurement of luminous Flux: ±15% 2. Tolerance of measurement of Dominant wavelength: ±2nm 3. Tolerance of measurement of forward voltage: ±0.05v 4. All data measured by P-tec’s test equipment 5. One delivery will include several color rank, VF and Iv ranks of the products. 6. The quantity-ratio of the ranks is decided by P-tec 7. Please confirm with P-tec salesman, if your request differs from standard specifications.
www.p-tec.net 101514 Rev0 JAS Page 4 of 6 Typical Electrical/Optical Characteristic Curves
- Ta=25°C Unless Otherwise Noted
www.p-tec.net 101514 Rev0 JAS Page 5 of 6 Precautions for Use 1. Recommended soldering conditions 1.1. Wave soldering 1.2. Recommended Soldering: Power dissipation of iron should be smaller than 15W and temperature should be controllable. Soldering temperature should be under 230, time 3sec. 2. Static Electricity 2.1 Static electricity or surge voltage damages LEDs. It is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs. 2.2 All devices, equipment and machinery must be properly grounded. It is recommended that measures be taken against surge voltage to the equipment that mounts the LEDs.
www.p-tec.net 101514 Rev0 JAS Page 6 of 6 Approved By Checked By Prepared By Customer Approval Signatures Record Of Revisions Rev. Comments Page Date