PLC760-WCB04 P-TEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Features
- Flat Lens
- High Luminous Output
- High Current Operation
- RoHS Compliant Mechanical Dimensions Notes: 1. Dimensions in millimeters [inch], and tolerance is ±0.25 [.010] unless otherwise noted. 2. Specifications subject to change without notice
www.p-tec.net 100814 Rev0 JAS Page 2 of 6 Device Selection Guide Chip Model Number Material Emitting Color PLC760-WCB04 InGaN Blue Absolute Maximum Ratings at Ta=25°C Electrical and Optical Characteristics at Ta=25°C Rating Parameter Symbol B Unit Power Dissipation P AD 266 mW Continuous Forward Current I AF 70 mA Peak Current (duty cycle 1/10, 1KHz) I PF 100 mA Reverse Voltage VR 5 V Operating Temperature Topr -40~+80 °C Storage Temperature Tstg -40~+100 °C Soldering Conditions Max. 260℃ for 5 sec Max.(3mm from the epoxy body) Parameter Symbol Min. Typ. Max. Unit Condition Forward Voltage VF -- 3.4 3.8 V Luminous Flux Iv 500 1500 -- mlm Dominant Wavelength λD -- 470 -- nm Viewing Angle 2θ1/2 -- 140 -- deg IF=30mA Reverse Current I R -- -- 50 μA VR=5V
www.p-tec.net 100814 Rev0 JAS Page 3 of 6 Luminous Flux Rank Limits ( IF = 30mA ) Unit: mlm Code Min. Max. A 500 100 B 1000 1500 C 1500 2000 D 2000 2500 Dominant Wavelength Rank Limits ( IF = 30mA ) Unit: nm Code Min. Max. B5 460 465 B6 465 470 B7 470 475 Forward Voltage Rank Limits ( IF = 30mA ) Unit: V Code Min. Max. I 2.8 3.0 J 3.0 3.2 K 3.2 3.4 L 3.4 3.6 M 3.6 3.8 Notes: 1. Tolerance of measurement of luminous Flux: ±15% 2. Tolerance of measurement of Dominant wavelength: ±2nm 3. Tolerance of measurement of forward voltage: ±0.05v 4. All data measured by P-tec’s test equipment 5. One delivery will include several color rank, VF and Iv ranks of the products. 6. The quantity-ratio of the ranks is decided by P-tec 7. Please confirm with P-tec salesman, if your request differs from standard specifications.
www.p-tec.net 100814 Rev0 JAS Page 4 of 6 Typical Electrical/Optical Characteristic Curves
- Ta=25°C Unless Otherwise Noted
www.p-tec.net 100814 Rev0 JAS Page 5 of 6 Precautions for Use 1. Recommended soldering conditions 1.1. Wave soldering 1.2. Recommended Soldering: Power dissipation of iron should be smaller than 15W and temperature should be controllable. Soldering temperature should be under 230, time 3sec. 2. Static Electricity 2.1 Static electricity or surge voltage damages LEDs. It is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs. 2.2 All devices, equipment and machinery must be properly grounded. It is recommended that measures be taken against surge voltage to the equipment that mounts the LEDs.
www.p-tec.net 100814 Rev0 JAS Page 6 of 6 Approved By Checked By Prepared By Customer Approval Signatures Record Of Revisions Rev. Comments Page Date