PLC1515A-WCRGB1

PLC1515A-WCRGB1 P-TEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 11

Technical content

Features

 High luminous intensity  Small package enables 2.5 pitch display  Wide viewing angle 110ﾟ  RoHS Compliant Mechanical Dimensions

1 Common Anode

2 Cathode (Blue)

3 Cathode (Green)

4 Cathode (Red)

Notes: 1. Specifications subject to change without notice 2. Tolerance of measurement of dimension: ±0.2mm

www.p-tec.net 011216 Rev0 MS Page 2 of 11 Device Selection Guide Model Number Chip Encapsulation PLC1515A-WCRGB1 Material Emitting Color Level Matte AlInGaP Red InGaN Green InGaN Blue Absolute Maximum Ratings at Ta=25℃ Parameter Symbol Rating Unit Power Dissipation Pd R 72 mW G 91 B 96 Forward Current (DC) IF R 30 mA G 30 B 30 Peak Forward Current (1/10 Duty Cycle 0.1ms Pulse Width) IFP R 100 mA G 100 B 100 Reverse Voltage VR 5 V Junction Temperature Tj R 125 ℃ G 125 B 125 Operating Temperature Topr -40~+85 ℃ Storage Temperature Tstg -40~+100 ℃ Soldering Temperature Tsol Reflow Soldering: 260℃ for 10 sec Hand Soldering: 350℃ for 3 sec Note: Proper current rating must be observed to maintain junction temperature below the maximum at all times.

www.p-tec.net 011216 Rev0 MS Page 3 of 11 Electrical and Optical Characteristics at Ta=25℃ Parameter Symbol Min. Typ. Max. Unit Condition Forward Voltage VF R -- 2.0 -- V IF=20mA G -- 3.0 -- B -- 3.1 -- Luminous Intensity lv R -- 280 -- mcd G -- 600 -- B -- 150 -- Peak Wavelength λP R -- 631 -- nm G -- 517 -- B -- 462 -- Dominant Wavelength λD R -- 621 -- G -- 520 -- B -- 467 -- Spectrum Radiation Bandwidth △λ R -- 15 -- G -- 32 -- B -- 22 -- Viewing Angle 2θ 1/2 R -- 110 -- deg G -- 110 -- B -- 110 -- Reverse Current IR R -- -- 10 μA VR=5V G -- -- 10 B -- -- 10 Notes: 1. Pulse width ≦ 0.1 msec, duty ≦ 1/10 2. Proper current rating must be observed to maintain junction temperature below the maximum at all the time. Recommended Soldering Pad Pattern

www.p-tec.net 011216 Rev0 MS Page 4 of 11 Luminous Intensity Rank Limits Bin Code Red Unit Min Max 21 170 220 mcd 22 220 290 23 290 380 Bin Code Green Unit Min Max 24 380 490 mcd 25 490 640 26 640 830 Bin Code Blue Unit Min Max 19 77 130 mcd 20 130 170 21 170 220 Dominant Wavelength Rank Limits Bin Code Red Unit Min Max A5 615 620 nm R1 620 625 R2 625 630 Bin Code Green Unit Min Max TG1 515 520 nm TG2 520 525 TG3 525 530 Bin Code Blue Unit Min Max B5 460 465 nm B6 465 470 B7 470 475

www.p-tec.net 011216 Rev0 MS Page 5 of 11 Forward Voltage Rank Limits Bin Code Red Unit Min Max V1C 1.8 2.1 V2A 2.1 2.4 Bin Code Green Unit Min Max V2C 2.7 3.0 V V3A 3.0 3.3 Bin Code Blue Unit Min Max V2C 2.7 3.0 V V3A 3.0 3.3 Note: Tolerance of measurement of Forward Voltage ±0.1V

www.p-tec.net 011216 Rev0 MS Page 6 of 11 Typical Electrical / Optical Characteristic Curves  (Ta = 25℃ Unless Otherwise Noted)

www.p-tec.net 011216 Rev0 MS Page 7 of 11 Package – Tape Dimensions

www.p-tec.net 011216 Rev0 MS Page 8 of 11 Reel Dimensions Notice: (1) Quantity:4000PCS/Reel (2)Tolerance unless mentioned is ±0.2mm

www.p-tec.net 011216 Rev0 MS Page 9 of 11 Packaging Package Package Dimensions Distribution of layer or box Total Note Size Unit Amount Unit Amount Unit Reel 8 mm 1 Reel 4000 pcs Inner Box 265 x 235 x 78 mm 5 Reel 20000 pcs Outer Box 430 x 330 x 270 mm 4 Inner Box 80000 pcs Note: Specifications subject to change without notice

www.p-tec.net 011216 Rev0 MS Page 10 of 11 Soldering  Hand Soldering Soldering Temperature 350℃ One Time Only Soldering Time 3 sec  Reflow Soldering Lead Solder Lead-Free Solder Pre-Heat 120~150℃ 180~200℃ Pre-Heat Time 120 sec Max 120 Sec Max. Peak 240℃ Max 260℃ Max Temperature Soldering Time Condition 10 sec Max. refer to temp profile A 10 sec Max. refer to temp profile B (N2 reflow is recommended A. Lead Solder B. Lead-Free Solder

www.p-tec.net 011216 Rev0 MS Page 11 of 11 Record Of Revisions Rev. Comments Page Date

0 Released Spec -- 01/12/15

Approved By Checked By Prepared By