PLA110S

PLA110 CLARE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Features

Description

Single Pole OptoMOS® Relays

Ordering Information

Part # Description PLA110 6 Pin Dip (50/Tube) PLA110S 6 Pin Surface Mount (50/Tube) PLA110STR 6 Pin Surface Mount (1000/Reel) PLA110 Units Load Voltage 400 V Load Current 150 mA Max R ON 22 Ω Pin Configuration Switching Characteristics of Normally Open (Form A) Devices CONTROL LOAD 10ms 10% 10% 90% TON TOFF /K31 /K33 /K32 /K34 /K35 /K36 /K2B /K43/K6F/K6E/K74/K72/K6F/K6C /KD0 /K43/K6F/K6E/K74/K72/K6F/K6C /K4E/K43 /K4C/K6F/K61/K64 /K44/K6F /K4E/K6F/K74 /K55/K73/K65 /K4C/K6F/K61/K64 /K41/K43/K2F/K44/K43 /K43/K6F/K6E/K66/K69/K67/K75/K72/K61/K74/K69/K6F/K6E PLA110 Pinout /K31 /K33 /K32 /K34 /K35 /K36 /K2B /K43/K6F/K6E/K74/K72/K6F/K6C /KD0 /K43/K6F/K6E/K74/K72/K6F/K6C /K4E/K43 /K2B /K4C/K6F/K61/K64 /KD0 /K4C/K6F/K61/K64 /K44/K43 /K4F/K6E/K6C/K79 /K43/K6F/K6E/K66/K69/K67/K75/K72/K61/K74/K69/K6F/K6E PLA110 Pinout

www.clare.com PLA110 Rev. 5

Electrical Characteristics

Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Absolute Maximum Ratings (@ 25˚ C) Parameter Conditions Symbol Min Typ Max Units Output Characteristics @ 25°C Load Voltage (Peak) - V L - - 400 V Load Current (Continuous) AC/DC Configuration - I L - - 150 mA DC Configuration - I L - - 250 mA Peak Load Current 10ms I L - - 400 mA On-Resistance AC/DC Configuration I L=150mA R ON -- 2 2 Ω DC Configuration I L=250mA R ON -- 7 Ω Off-State Leakage Current V L=400V I LEAK -- 1µ A Switching Speeds Turn-On I F=5mA, VL=10V T ON -- 1 m s Turn-Off I F=5mA, VL=10V T OFF - - 0.50 ms Output Capacitance 50V; f=1MHz C OUT - 25 - pF Input Characteristics @ 25°C Input Control Current I L=150mA I F 5- 5 0 m A Input Dropout Current - I F 0.4 0.7 - mA Input Voltage Drop I F=5mA V F 0.9 1.2 1.4 V Reverse Input Voltage - V R -- 5 V Reverse Input Current V R=5V I R - - 10 µA Common Characteristics @ 25°C Input to Output Capacitance - C I/O -3 - p F Input to Output Isolation - V I/O 3750 - - V RMS Parameter Min Typ Max Units Input Power Dissipation - - 150 1 mW Input Control Current - - 50 mA Peak (10ms) - - 1 A Reverse Input Voltage - - 5 V Total Power Dissipation - - 800 2 mW Isolation Voltage Input to Output 3750 - - V RMS Operational Temperature -40 - +85 °C Storage Temperature -40 - +125 °C Soldering Temperature Surface Mount Package - - +220 °C (10 Seconds Max.) 1 Derate Linearly 1.33 mw/˚C 2 Derate Linearly 6.67 mw/˚C

www.clare.comRev. 5 PERFORMANCE DATA* The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in th e written specifications, please contact our application department. PLA110 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C) IF = 5mADC LED Forward Voltage Drop (V) Device Count (N) PLA110 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 150mADC; IF = 5mADC) /K33/K35 /K33/K30 /K32/K35 /K32/K30 /K31/K35 /K31/K30 /K35 /K30 /K31/K36 /K31/K38 /K32/K30/K31/K35 /K31/K37 /K31/K39 On-Resistance (Ω) Device Count (N) PLA110 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) Blocking Voltage (V) Device Count (N) PLA110 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25°C) LED Current (mA) Device Count (N) PLA110 Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) (Load Current = 100mADC; IF = 5mADC) /K30/K2E/K31/K37 /K30/K2E/K32/K37 /K30/K2E/K33/K37/K30/K2E/K31/K32 /K30/K2E/K32/K32 /K30/K2E/K33/K32 Turn-Off (ms) Device Count (N) /K32/K35 /K32/K30 /K31/K35 /K31/K30 /K35 /K30 PLA110 Typical Turn-On Time (N=50 Ambient Temperature = 25°C) (Load Current = 100mADC; IF = 5mADC) /K30/K2E/K32/K36 /K30/K2E/K33/K32 /K30/K2E/K33/K38 /K30/K2E/K33/K35/K30/K2E/K32/K39/K30/K2E/K32/K33 Turn-Off (ms) Device Count (N) /K32/K35 /K32/K30 /K31/K35 /K31/K30 /K35 /K30 PLA110 Typical Load Current vs. Temperature (N=50 Ambient Temperature = 25°C) Temperature (°C) Load Current (mA) /K33/K30/K30 /K32/K35/K30/K3 /K32/K30/K30/K3 /K31/K35/K30/K3 /K31/K30/K30/K3 /K35/K30/K3 /K30 /K2D/K34/K30 /K2D/K32/K30 /K30 /K32/K30 /K34/K30 /K36/K30 /K38/K30 /K31/K32/K30 /K31/K30/K30 10mA 5mA 10mA 5mA DC Configuration AC/DC Configuration PLA110 Typical Leakage vs. Temperature (Measured across Pins 4 & 6) Temperature (°C) Leakage (µA) -40 0.035 0.030 0.025 0.020 0.015 0.010 0.005 -20 0 20 40 60 80 100 PLA110 Typical IF for Switch Operation (N=50 Ambient Temperature = 25°C) (Load Current = 150mADC) LED Current (mA) Device Count (N) PLA110 Typical On Resistance vs. Temp. Load Current=100mA Instantaneous Temperature (°C) On-Resistance (Ω) /K32/K35 /K32/K30 /K31/K35 /K31/K30 /K2D/K34/K30 /K2D/K32/K30 /K30 /K32/K30 /K34/K30 /K36/K30 /K38/K30 /K31/K32/K30 /K31/K30/K30 IF=5mA PLA110 Typical On-Resistance vs. Temperature (Load Current = Max Rated at Temp.) DC Configuration On-Resistance (Ω) /K2D/K34/K30 /K31/K30 /K39 /K38 /K37 /K36 /K35 /K30 /K2D/K32/K30 /K30 /K32/K30 /K34/K30 /K36/K30 /K38/K30 /K31/K30/K30 IF=5mA IF=10mA PLA110 Typical On-Resistance vs. Temperature (Load Current = Max rated at Temp.) AC/DC Configuration Temperature (°C) On-Resistance (Ω) /K2D/K34/K30 /K32/K35 /K32/K30 /K31/K35 /K31/K30 /K35 /K30 /K2D/K32/K30 /K30 /K32/K30 /K34/K30 /K36/K30 /K38/K30 /K31/K30/K30 5mA 10mA

www.clare.com4 PLA110 Rev. 5 PERFORMANCE DATA* *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in t he written specifications, please contact our application department. PLA110 Typical LED Forward Voltage Drop vs. Temperature Temperature (°C) LED Forward Voltage Drop (V) /K31/K2E/K38 /K31/K2E/K36 /K31/K2E/K34 /K31/K2E/K32 /K31/K2E/K30 /K30/K2E/K38 /K2D/K34/K30 /K2D/K32/K30 /K30 /K32/K30 /K34/K30 /K36/K30 /K38/K30 /K31/K32/K30 /K31/K30/K30 50mA 10mA 5mA PLA110 Typical Turn-On vs. LED Forward Current (Load Current = 150mADC) Forward Current (mA) Turn-On (ms) /K30 /K35 /K31 /K30/K31 /K35/K32 /K30/K32 /K35/K33 /K30/K33 /K35/K34 /K30/K34 /K35 /K30/K2E/K34/K30 /K30/K2E/K33/K35 /K30/K2E/K33/K30 /K30/K2E/K32/K35 /K30/K2E/K32/K30 /K30/K2E/K31/K35 /K30/K2E/K31/K30 /K30/K2E/K30/K35 /K30 /K35/K30 PLA110 Typical Turn-Off vs. LED Forward Current (Load Current = 150mADC) Forward Current (mA) Turn-Off (ms) /K30 /K35 /K31 /K30/K31 /K35/K32 /K30/K32 /K35/K33 /K30/K33 /K35/K34 /K30/K34 /K35 /K30/K2E/K31/K32 /K30/K2E/K31/K30 /K30/K2E/K30/K38 /K30/K2E/K30/K36 /K30/K2E/K30/K34 /K30/K2E/K30/K32 /K30 /K35/K30 PLA110 Typical IF for Switch Operation vs. Temperature (Load Current = 100mADC) Temperature (°C) LED Current (mA) /K2D/K34/K30 /K33/K2E/K30/K30/K30/K3 /K32/K2E/K35/K30/K30/K3 /K32/K2E/K30/K30/K30/K3 /K31/K2E/K35/K30/K30/K3 /K31/K2E/K30/K30/K30/K3 /K30/K2E/K35/K30/K30/K3 /K30 /K2D/K32/K30 /K30 /K32/K30 /K34/K30 /K36/K30 /K38/K30 /K31/K30/K30 PLA110 Typical IF for Switch Dropout vs. Temperature (Load Current = 100mADC) Temperature (°C) LED Current (mA) /K2D/K34/K30 /K33/K2E/K30/K30/K30 /K32/K2E/K35/K30/K30 /K32/K2E/K30/K30/K30 /K31/K2E/K35/K30/K30/K3 /K31/K2E/K30/K30/K30/K3 /K30/K2E/K35/K30/K30/K3 /K30 /K2D/K32/K30 /K30 /K32/K30 /K34/K30 /K36/K30 /K38/K30 /K31/K30/K30 PLA110 Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C) IF = 5mADC Load Voltage (V) Load Current (mA) 150 100 -50 -100 -150 PLA110 Energy Rating Curve Time Load Current (A) 10µs 1.2 1.0 0.8 0.6 0.4 0.2 1ms100µs 100ms 1s10ms 10s 100s PLA110 Typical Turn-On vs. Temperature (Load Current = 100mADC) Temperature (°C) Turn-On (ms) /K2D/K34/K30 /K30/K2E/K36 /K30/K2E/K35 /K30/K2E/K34/K3 /K30/K2E/K33/K3 /K30/K2E/K32 /K30/K2E/K31/K3 /K30 /K2D/K32/K30 /K30 /K32/K30 /K34/K30 /K36/K30 /K38/K30 /K31/K32/K30 /K31/K30/K30 5mA 10mA PLA110 Typical Turn-Off vs. Temperature (Load Current = 100mADC) Temperature (°C) Turn-Off (ms) /K2D/K34/K30 /K30/K2E/K33 /K30/K2E/K32/K35 /K30/K2E/K32 /K30/K2E/K31/K35 /K30/K2E/K31 /K30/K2E/K30/K35 /K2D/K32/K30 /K30 /K32/K30 /K34/K30 /K36/K30 /K38/K30 /K31/K30/K30 IF=5mA PLA110 Typical Blocking Voltage vs. Temperature Temperature (°C) Blocking Voltage (VRMS) -40 480 475 470 465 460 455 450 -20 0 20 40 60 80 100

www.clare.com 5Rev. 5 Dimensions mm (inches) Mechanical Dimensions PC Board Pattern (Top View) 6.350 ± .127 (.250 ± .005) 2.540 ± .127 (.100 ± .005) 7.620 ± .127 (.300 ± .005) 5.080 ± .127 (.200 ± .005) 6-.800 DIA. (6-.031 DIA.) 6.350 ± .127 (.250 ± .005) 8.382 ± .635 (.330 ± .025) 2.540 ± .127 (.100 ± .005) 9.144 (.360) .457 ± .076 (.018 ± .003)

6 Pin DIP Through Hole (Standard)

7.239 TYP. (.285) 3.302 (.130) 7.620 ± .254 (.300 ± .010) 9.144 ± .508 (.360 ± .020) PC Board Pattern (Top View) 2.540 ± .127 (.100 ± .005) 8.305 ± .127 (.327 ± .005) 1.905 ± .127 (.075 ± .005) 1.499 ± .127 (.059 ± .005) 4.445 ± .127 (.175 ± .005) 3.302 (.130) 7.620 ± .254 (.300 ± .010) 6.350 ± .127 (.250 ± .005) 8.382 ± .635 (.330 ± .025) 2.540 ± .127 (.100 ± .005) 9.525 ± .254 (.375 ± .010) .457 ± .076 (.018 ± .003) .254 TYP. (.010) .635 TYP. (.025)

6 Pin DIP Surface Mount (“S” Suffix)

Tape and Reel Packaging for 6 Pin Surface Mount Package 7.493 ± .102 (.295 ± .004) 12.090 (.476) 330.2 DIA. (.069 ± .004) 3.987 ± .102 (.157 ± .004) 1.498 ± .102 (.265) .406 MAX. (.016) 4.877 (.192) Top Cover Tape 2.007 ± .102 (.079 ± .004) 11.989 ± .102 (.472 ± .004) User Direction of Feed .050R TYP. 16.002 ± .305 (.630 ± .012) 10.100 (.398) Embossment Embossed Carrier Top Cover Tape Thickness .102 MAX. (.004) 10.100 ± .102 (.398 ± .004) 1.549 ± .102 (.061 ± .004)

78 Cherry Hill Drive

Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Clare Micronix Division

145 Columbia

Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 SALES OFFICES AMERICAS Americas Headquarters Clare Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd.

3425 Harvester Road, Suite 202

Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare

1852 West 11th Street, #348

Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 EUROPE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 France Clare France Sales Lead Rep 99 route de Versailles

91160 Champlan

Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12

85077 Manching

Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spå nga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 ASIA PACIFIC Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 http://www.clare.com Worldwide Sales Offices Specification: DS-PLA110-R5 ©Copyright 2001, Clare, Inc. OptoMOS ® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 4/3/01 Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, with- out notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct phys- ical harm, injury or death to a person.