PLA110LS

PLA110L CLARE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Features

Description

Ordering Information

Part # Description PLA110L 6 Pin Dip (50/Tube) PLA110LS 6 Pin Surface Mount (50/Tube) PLA110LSTR 6 Pin Surface Mount (1000/Reel) PLA110L Units Load Voltage 400 V Load Current 150 mA Max R ON 25 Ω Pin Configuration /K31 /K33 /K32 /K34 /K35 /K36 /K2B /K43/K6F/K6E/K74/K72/K6F/K6C /KD0 /K43/K6F/K6E/K74/K72/K6F/K6C /K4E/K43 /K4C/K6F/K61/K64 /K44/K6F /K4E/K6F/K74 /K55/K73/K65 /K4C/K6F/K61/K64 /K41/K43/K2F/K44/K43 /K43/K6F/K6E/K66/K69/K67/K75/K72/K61/K74/K69/K6F/K6E PLA110L Pinout /K31 /K33 /K32 /K34 /K35 /K36 /K2B /K43/K6F/K6E/K74/K72/K6F/K6C /KD0 /K43/K6F/K6E/K74/K72/K6F/K6C /K4E/K43 /K2B /K4C/K6F/K61/K64 /KD0 /K4C/K6F/K61/K64 /K44/K43 /K4F/K6E/K6C/K79 /K43/K6F/K6E/K66/K69/K67/K75/K72/K61/K74/K69/K6F/K6E PLA110L Pinout /K43/K4F/K4E/K54/K52/K4F/K4C /K4C/K4F/K41/K44 /K31/K30/K6D/K73 /K31/K30/K25 /K31/K30/K25 /K39/K30/K25 /K2B /K54 /K4F/K4E /K54 /K4F/K46/K46 /K2B /K2B

www.clare.com2 PLA110L Rev. 4.0 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the opera- tional sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability.

Electrical Characteristics

Absolute Maximum Ratings (@ 25˚ C) Parameter Conditions Symbol Min Typ Max Units Output Characteristics @ 25°C Load Voltage (Peak) - V L - - 400 V Load Current (Continuous) AC/DC Configuration - I L - - 150 mA DC Configuration - I L - - 250 mA Peak Load Current 10ms I L -- - m A On-Resistance AC/DC Configuration I L=150mA R ON -- 2 5 Ω DC Configuration I L=250mA R ON -- 9 Ω Off-State Leakage Current V L=400V I LEAK -- - µ A Switching Speeds Turn-On I F=5mA, VL=10V T ON -- 1 m s Turn-Off I F=5mA, VL=10V T OFF - - 0.25 ms Output Capacitance 50V; f=1MHz C OUT - 25 - pF Load Current Limiting I CL 190 235 280 mA Input Characteristics @ 25°C Input Control Current I L=150mA I F 5- 5 0 m A Input Dropout Current - I F 0.4 0.7 - mA Input Voltage Drop I F=5mA V F 0.9 1.2 1.4 V Reverse Input Voltage - V R -- 5 V Reverse Input Current V R=5V I R - - 10 µA Common Characteristics @ 25°C Input to Output Capacitance - C I/O -3 - p F Input to Output Isolation - V I/O 3750 - - V RMS Parameter Min Typ Max Units Input Power Dissipation - - 150 1 mW Input Control Current - - 50 mA Peak (10ms) - - 1 A Reverse Input Voltage - - 5 V Total Power Dissipation - - 800 2 mW Isolation Voltage Input to Output 3750 - - V RMS Operational Temperature -40 - +85 °C Storage Temperature -40 - +125 °C Soldering Temperature Surface Mount Package - - +220 °C (10 Seconds Max.) 1 Derate Linearly 1.33 mw/˚C 2 Derate Linearly 6.67 mw/˚C

www.clare.com 3Rev. 4.0 PERFORMANCE DATA* *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in t he written specifications, please contact our application department. PLA110L Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C) IF = 5mADC LED Forward Voltage Drop (V) Device Count (N) PLA110L Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 150mADC; IF = 5mADC) On-Resistance (Ω) Device Count (N) PLA110L Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) Blocking Voltage (V) Device Count (N) PLA110L Typical IF for Switch Dropout (N=50 Ambient Temperature = 25°C) LED Current (mA) Device Count (N) PLA110L Typical Turn-On Time (N=50 Ambient Temperature = 25°C) (Load Current = 150mADC; IF = 5mADC) Turn-On (ms) Device Count (N) PLA110L Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) (Load Current = 150mADC; IF = 5mADC) Turn-Off (ms) Device Count (N) PLA110L Typical Load Current vs. Temperature Temperature (°C) Load Current (mA) 300 250 200 150 100 -40 -20 0 20 40 60 80 120 100 20mA 10mA 5mA PLA110L Typical Turn-On vs. Temperature (Load Current = 150mADC) Temperature (°C) Turn-On (ms) -40 3.0 2.5 2.0 1.5 1.0 0.5 -20 0 20 40 60 80 120 100 5mA 10mA 20mA PLA110L Typical Leakage vs. Temperature (Measured across Pins 4 & 6) Temperature (°C) Leakage (µA) -40 0.035 0.030 0.025 0.020 0.015 0.010 0.005 -20 0 20 40 60 80 100 PLA110L Typical Blocking Voltage vs. Temperature Temperature (°C) Blocking Voltage (VRMS) -40 480 475 470 465 460 455 450 -20 0 20 40 60 80 100 PLA110L Typical Turn-Off vs. Temperature (Load Current = 150mADC) Temperature (°C) Turn-Off (ms) -40 0.140 0.120 0.100 0.080 0.060 0.040 0.020 -20 0 20 40 60 80 100 5mA PLA110L Typical IF for Switch Operation (N=50 Ambient Temperature = 25°C) (Load Current = 150mADC) LED Current (mA) Device Count (N)

www.clare.com4 PLA110L Rev. 4.0 PERFORMANCE DATA* *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in t he written specifications, please contact our application department. PLA110L Typical LED Forward Voltage Drop vs. Temperature Temperature (°C) LED Forward Voltage Drop (V) 1.8 1.6 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 120 100 50mA 30mA 20mA 10mA 5mA PLA110L Typical Turn-On vs. LED Forward Current (Load Current = 150mADC) Forward Current (mA) Turn-On (ms) 0 5 1 01 52 02 53 03 54 04 5 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 PLA110L Typical Turn-Off vs. LED Forward Current (Load Current = 150mADC) Forward Current (mA) Turn-Off (ms) 0 5 1 01 52 02 53 03 54 04 5 0.12 0.10 0.08 0.06 0.04 0.02 PLA110L Typical On-Resistance vs. Temperature (Load Current = 150mADC; IF = 5mADC) Temperature (°C) On-Resistance (Ω) -40 -20 0 20 40 60 80 100 PLA110L Typical IF for Switch Operation vs. Temperature (Load Current = 150mADC) Temperature (°C) LED Current (mA) -40 3.000 2.500 2.000 1.500 1.000 0.500 -20 0 20 40 60 80 100 PLA110L Typical IF for Switch Dropout vs. Temperature (Load Current = 150mADC) Temperature (°C) LED Current (mA) -40 3.000 2.500 2.000 1.500 1.000 0.500 -20 0 20 40 60 80 100 PLA110L Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C) IF = 5mADC Load Voltage (V) Load Current (mA) 150 100 -50 -100 -150 PLA110L Energy Rating Curve Time Load Current (A) 10µs 1.2 1.0 0.8 0.6 0.4 0.2 1ms100µs 100ms 1s10ms 10s 100s

(inches) MECHANICAL DIMENSIONS PC Board Pattern (Top View) 6.350 ± .127 (.250 ± .005) 2.540 ± .127 (.100 ± .005) 7.620 ± .127 (.300 ± .005) 5.080 ± .127 (.200 ± .005) 6-.800 DIA. (6-.031 DIA.) 6.350 ± .127 (.250 ± .005) 8.382 ± .635 (.330 ± .025) 2.540 ± .127 (.100 ± .005) 9.144 (.360) .457 ± .076 (.018 ± .003)

6 Pin DIP Through Hole (Standard)

7.239 TYP. (.285) 3.302 (.130) 7.620 ± .254 (.300 ± .010) 9.144 ± .508 (.360 ± .020) PC Board Pattern (Top View) 2.540 ± .127 (.100 ± .005) 8.305 ± .127 (.327 ± .005) 1.905 ± .127 (.075 ± .005) 1.499 ± .127 (.059 ± .005) 4.445 ± .127 (.175 ± .005) 3.302 (.130) 7.620 ± .254 (.300 ± .010) 6.350 ± .127 (.250 ± .005) 8.382 ± .635 (.330 ± .025) 2.540 ± .127 (.100 ± .005) 9.525 ± .254 (.375 ± .010) .457 ± .076 (.018 ± .003) .254 TYP. (.010) .635 TYP. (.025)

6 Pin DIP Surface Mount (“S” Suffix)

Tape and Reel Packaging for 6 Pin Surface Mount Package 7.493 ± .102 (.295 ± .004) 12.090 (.476) 330.2 DIA. (.069 ± .004) 3.987 ± .102 (.157 ± .004) 1.498 ± .102 (.265) .406 MAX. (.016) 4.877 (.192) Top Cover Tape 2.007 ± .102 (.079 ± .004) 11.989 ± .102 (.472 ± .004) User Direction of Feed .050R TYP. 16.002 ± .305 (.630 ± .012) 10.100 (.398) Embossment Embossed Carrier Top Cover Tape Thickness .102 MAX. (.004) 10.100 ± .102 (.398 ± .004) 1.549 ± .102 (.061 ± .004)

Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to sup- port or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-PLA110L-R4.0 ©Copyright 2002, Clare, Inc. OptoMOS ® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 6/21/02 For additional information please visit our website at: www.clare.com