PLA01A-050-R PHIHONG | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
- EISA Level IV Compliant • Lower Cost than Regulated
- 90 – 264 VAC Input Range • Zero Minimum Load
- High Efficiency
- Light Weight
- Double Insulated
Applications
- Wireless Communications • Blue Tooth Device Charger
- Cordless Head Set
- Cell Phone Safety Approvals
- UL / cUL 60950-1 Mechanical Characteristics
- Length: 50.5 mm (2.0 in) • Height: 35 mm (1.38 in)
- Width: 25 mm (0.98 in) • Weight: 58 g ( 2.05 oz) Dimension Diagram Unit: mm (inch)
Output Voltage / Current Characteristics Curve WWW.PHIHONG.COM Model Nameplate Voltage PLA01A-050-R 5.0 V PLA01A-090-R 9.0 V PLA01A-120-R 12.0 V PLA01A-050-R PLA01A-090-R PLA01A-120-R
PLA01A Characteristics WWW.PHIHONG.COM INPUT: AC Input Voltage Range Immunity 90 to 264VAC EN61000-4-2, Level 3 AC Inrush Current EN61000-4-5, Level 3 40A max @ 240VAC, 25°C Input Power Saving General Leakage Current <0.3W max @ 120/240VAC, no load ≤ 10 uA max California Energy Commission Compliant, Level IV Dielectric Withstand (Hi-pot) Efficiency 3KVAC, Primary to Secondary MTBF (Full Load, 25°C) ≥ 52.4 % 100K Hrs. min. at max load, 25°C ambient and 120VAC OUTPUT: Ripple (1) DC Output Connector 150 mVp-p 2.1 mm x 5.5 mm Center Positive AC Input Clip Over Voltage Protection 5VDC: OVP shall not exceed 15V Max Fixed US blade 9VDC: OVP shall not exceed 18V Max 12VDC: OVP shall not exceed 24V Max Short Circuit Protection Auto Recovery ENVIRONMENTAL: Operation Temperature (Convection) 0°C ~ 40°C Storage Temperature -40°C ~ 85°C Humidity 90% RH Max Emissions FCC Class B EN55022 class B Note: (1) Measured after 10 minutes with by-pass capacitors 0.1uf / 10uf at output connector terminal and oscilloscope set at 20 MHz. Phihong reserves the right to make changes without further notice. Please consult Phihong USA and visit www.phihong.com for the most up-to-date specifications. 11-11-08