DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Features
- RoHS Compliant
- Low Power Consumption
- Rugged and Durable Mechanical Dimensions Notes: 1. All dimensions are in millimeters unless otherwise noted 2. Tolerance is±0.25mm unless otherwise noted 3. Specifications subject to change without notice
www.p-tec.net 100213 Rev0 MS Page 2 of 6 Device Selection Guide Part Number Chip Material Emitting Color PL84-WCRGB1 AlInGaP Hyper Red InGaN True Green InGaN Blue Absolute Maximum Ratings at Ta=25℃ Hyper Red Parameter Symbol Rating Unit Power Dissipation PD 75 mW Reverse Voltage VR 5 V DC Forward Current IF 30 mA Peak Current (duty cycle 1/10, 1KHz) IPF 100 mA Operating Temperature Topr -40~+105 ℃ Storage Temperature Tstg -40~+105 ℃ Soldering Temperature (1.6mm from body) Tsol. Dip Soldering : 260℃ for 5 sec. Hand Soldering : 350℃ for 3 sec. True Green Parameter Symbol Rating Unit Power Dissipation PD 120 mW Reverse Voltage VR 5 V DC Forward Current IF 30 mA Reverse (Leakage) Current Ir 100 μA Peak Current (duty cycle 1/10, 1KHz) IPF 100 mA Operating Temperature Topr -25~+85 ℃ Storage Temperature Tstg -40~+100 ℃ Soldering Temperature (1.6mm from body) Tsol. Dip Soldering : 260℃ for 5 sec. Hand Soldering : 350℃ for 3 sec. Electrostatic discharge ESD 300 V Blue Parameter Symbol Rating Unit Power Dissipation PD 120 mW Reverse Voltage VR 5 V DC Forward Current IF 30 mA Reverse (Leakage) Current Ir 50 μA Peak Current (duty cycle 1/10, 1KHz) IPF 100 mA Operating Temperature Topr -25~+85 ℃ Storage Temperature Tstg -40~+100 ℃ Soldering Temperature (1.6mm from body) Tsol. Dip Soldering : 260℃ for 5 sec. Hand Soldering : 350℃ for 3 sec. Electrostatic discharge ESD 300 V
www.p-tec.net 100213 Rev0 MS Page 3 of 6 Electrical and Optical Characteristics at Ta=25℃ Notes: 1. IS tester used 2. Customer special requirements are welcomed. 3. Specifications subject to change without notice Hyper Red Parameter Symbol Min. Typ. Max. Unit Condition Forward Voltage Per Segment VF -- 2.1 2.5 V IF=20mA Luminous Intensity Iv 2000 4000 -- mcd IF=20mA Peak Wavelength λP -- 632 -- nm IF=20mA Dominant Wavelength λd -- 625 -- nm IF=20mA Reverse (Leakage) Current Ir -- -- 100 nm Vr=5V Viewing Angle 2θ1/2 -- 40 -- -- deg Spectrum Line Halfwidth Δλ -- 20 -- -- IF=20mA True Green Parameter Symbol Min. Typ. Max. Unit Condition Forward Voltage Per Segment VF -- 3.2 4.0 V IF=20mA Luminous Intensity Iv 1000 2500 -- mcd IF=20mA Dominant Wavelength λd -- 520 -- nm IF=20mA Reverse (Leakage) Current Ir -- -- 50 nm Vr=5V Viewing Angle 2θ1/2 -- 40 -- -- deg Spectrum Line Halfwidth Δλ -- 35 -- -- IF=20mA Blue Parameter Symbol Min. Typ. Max. Unit Condition Forward Voltage Per Segment VF -- 3.2 4.0 V IF=20mA Luminous Intensity Iv 500 1000 -- mcd IF=20mA Dominant Wavelength λd -- 465 -- nm IF=20mA Reverse (Leakage) Current Ir -- -- 50 nm Vr=5V Viewing Angle 2θ1/2 -- 40 -- -- deg Spectrum Line Halfwidth Δλ -- 26 -- -- IF=20mA
www.p-tec.net 100213 Rev0 MS Page 4 of 6 Typical Electrical / Optical Characteristic Curves
www.p-tec.net 100213 Rev0 MS Page 5 of 6 Precautions For Use
www.p-tec.net 100213 Rev0 MS Page 6 of 6 Record Of Revisions Rev. Comments Page Date
0 Released Spec -- 10/02/2013
1 Added new logo All 02/15/2017
Approved By Checked By Prepared By