PL09A SJM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • 40 - 1200MHz
  • Gain 20.6dB @ 40MHz
  • CSO 61.9dBc @ 15dBmV
  • CTB 77.5dBc @ 15dBmV
  • NF 0.7dB @ 900MHz
  • Lead-free / Green / compliant SOT-89 Package 1) Test Conditions : T=25°C, Supply Voltage=3V, 75ohm System 2) Note 1. OIP3 measured with two tones at an output power of 3dBm/tone separated by 1MHz. Specifications Parameter Units Typ. Condition S21 dB 20.0 40 ~ 1200MHz Gain Flatness dB 3.0 40 ~ 1200MHz S11 dB -23 S22 dB -17 CSO dBc 61.9 15dBmV/132ch Flat CTB dBc 77.5 15dBmV/132ch Flat OIP3 dBm 34.5 Note 1 2) P1dB dBm 16.0 NF dB 0.9 I mA 48 V V 3 Rth °C/W

Applications

  • FTTH Receivers
  • DVB-T Receivers
  • DVB-C Receivers
  • DMB-T Receivers

Description

ThePL09A is a highperformanceGaAsp-HEMTLNA(LowNoise Amplifier). The featuresof PL09A are highlinearperformance,low noisefigure,lowpowerconsumptionandhighreliability. ThePL09A canbe easilymatchedto obtainoptimumnoisefigureandlinearity. The PL09A operatesfrom a single3 voltagesupplyand has an internalactivebias. ThisPL09A providesthemostsuitablesolutions for LNA in communicationsystems. All devicesare 100% RF and DCtested. Functional Diagram RF IN GND 2,4 RF OUT / Bias 3 Parameter Rating Unit Device Voltage 4 V Device Current 56 mA RF Power Input 30 dBm Storage Temperature -55 to 150 °C Ambient Operating Temperature -40 to 85 °C Junction Temperature 185 °C 1) Operation of this device above any of these parameters may cause permanent damage. 2) MTTF is more than 100 years. Absolute Maximum Ratings

http://www.prewell.com 2 Low Noise Amplifier SJM PREWELL PL09A Productsand product information are subject to change without notice.Version 0.6 0 200 400 600 800 1000 1200 25℃ NF (dB) Frequency (MHz) NF vs. Frequency 0 200 400 600 800 1000 1200 -50 -40 -30 -20 -10 S22S11 25 -40 S_parameter (dB) Frequency (MHz) S_Parameter vs. Frequency S21 200 400 600 800 1000 1200 25℃ -40℃ 85℃ OIP3 (dBm) Frequency (MHz) OIP3 vs Frequency 200 400 600 800 1000 1200 25℃ -40℃ 85℃ P1dB (dBm) Frequency (MHz) P1dB vs Frequency 0 200 400 600 800 25℃ CSO (-dBc) Frequency (MHz) CSO vs. Frequency 132 channels, +30dBmV/channel flat loading, 25℃ 0 200 400 600 800 100 25℃ CTB (-dBc) Frequency (MHz) CTB vs. Frequency 132 channels, +30dBmV/channel flat loading, +25℃

40 MHz –1200 MHz Application Circuit

S-Parameter NF vs. Frequency OIP3 vs. Frequency P1dB vs. Frequency CSO vs. Frequency 132 channels, +15dBmV/channel flat loading CTB vs. Frequency 132 channels, +15dBmV/channel flat loading RF IN RF OUT10nF 10nF 820nH 100nF 1uF Vdd 10nF33nH 910ohm 240ohm 1) Note 1 : OIP3 measured with two tones at an output power of 3dBm/tone 2) Note 2 : 3V/ 48mA, CSO/CTB Test Condition : 15dBmV/132ch, T=25°C

http://www.prewell.com 3 Low Noise Amplifier SJM PREWELL PL09A Productsand product information are subject to change without notice.Version 0.6 0 200 400 600 800 1000 P1dB (dBm) Frequency (MHz) 25°C -40°C 85°C P1dB vs Frequency 0 200 400 600 800 100 CTB (-dBc) Frequency (MHz) 25°C CTB vs. Frequency 132 channels, +15dBmV/channel flat loading 0 200 400 600 800 CSO (-dBc) Frequency (MHz) 25°C CSO vs. Frequency 132 channels, +15dBmV/channel flat loading 0 200 400 600 800 1000 OIP3 (dBm) Frequency (MHz) 25°C -40°C 85°C OIP3 vs Frequency 0 200 400 600 800 1000 NF (dB) Frequency (MHz) 25°C NF vs Frequency 0 200 400 600 800 1000 -50 -40 -30 -20 -10 S-parameter (dB) Frequency (MHz) 25°C -40°C 85°C S-Parameter S22 S11 S21

40 MHz –1000 MHz Application Circuit

S-Parameter NF vs. Frequency OIP3 vs. Frequency P1dB vs. Frequency CSO vs. Frequency 132 channels, +15dBmV/channel flat loading CTB vs. Frequency 132 channels, +15dBmV/channel flat loading 1) Note 1 : OIP3 measured with two tones at an output power of 3dBm/tone 2) Note 2 : 3V/ 48mA, CSO/CTB Test Condition : 15dBmV/132ch, T=25°C RF IN RF OUT10nF 10nF 1uH 100nF 1uF 8.2nH 1pF Supply Voltage 910Ω 510Ω 20Ω 47nH 10nF RBIAS

http://www.prewell.com 4 Low Noise Amplifier SJM PREWELL PL09A Productsand product information are subject to change without notice.Version 0.6 Evaluation Board Layout (30x40) Lead-free /RoHS Compliant / Green SOT-89 Package Outline Land Pattern Mounting Instructions 1 Use a large ground pad area with many plated through-holes as shown. 2 We recommend 1 ozcopper minimum. 3 Measurement for our data sheet was made on 1.6mm thick FR-4 Board. 4 RF trace width depends on the board material and construction. 5 Add mounting screws near the part to fasten the board to a heatsink. 6 Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. REF. DIMENSIONS (mm) Min. Max. A 1.40 1.60 B 0.43 0.58 B1 0.36 0.54 C 0.35 0.46 D 4.30 4.70 D1 1.50 1.87 E 2.29 2.70 E1 2.13 2.18 e 1.5 e1 3.0 H .3.43 5.10 L 0.74 1.20 Product Code Lot Number POOOO X X X X