PL07A SJM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
- 40 - 1000MHz
- Gain 20.0dB @ 50MHz
- CSO 59.5dBc @ 15dBmV
- CTB 77.6dBc @ 15dBmV
- NF 0.67dB @ 100MHz
- Lead-free / Green / compliant DFN 8L Package 1) Test Conditions : T=25°C, Supply Voltage=3V, 75ohm System 2) Note 1. OIP3 measured with two tones at an output power of 3dBm/tone separated by 1MHz. Absolute Maximum Ratings Parameter Rating Unit Device Voltage 4 V Device Current 56 mA RF Power Input 30 dBm Storage Temperature -55 to 150 °C Junction Temperature 185 °C Specifications Parameter Units Typ. Condition S21 dB 20.0 40 ~ 1000MHz Gain Flatness dB 2.0 40 ~ 1000MHz S11 dB -20 S22 dB -15 CSO dBc 59.5 15dBmV/132ch Flat CTB dBc 77.6 15dBmV/132ch Flat OIP3 dBm 35.5 Note 1 2) P1dB dBm 16.5 NF dB 0.67 I mA 45 V V 3 Rth °C/W 40
Applications
- FTTH Receivers
- DVB-T Receivers
- DVB-C Receivers
- DMB-T Receivers ESD/MSL ESD sensitive device. Observe handling precautions.
2 HBM: Class 0, JESD22-A114
3 CDM: Class C3 , JESD22-C101F
4 MSL 3, J-STD-020
1,3,4,5,6,8 Exposed Pad RF OUT / Bias 7
Description
The PL07A is a highperformanceGaAsp-HEMTLNA (LowNoise Amplifier). The featuresof PL07A are highlinearperformance,low noisefigure,lowpowerconsumptionandhighreliability. ThePL07A canbe easilymatchedto obtainoptimumnoisefigureandlinearity. The PL07A operatesfrom a single3 voltagesupplyand has an internalactivebias. ThisPL07A providesthemostsuitablesolutions forLNAincommunicationsystems. Alldevicesare100% RFandDC tested. 1) Stresses above the maximum values listed have may cause permanent damage to the device. 2) MTTF is more than 100 years.
http://www.prewell.com 2 Low Noise Amplifier SJM PREWELL PL07A Productsand product information are subject to change without notice.Version 0.3 0 200 400 600 800 1000 -30 -20 -10 S-Parameter (dB) Frequency (MHz) S21 S22 S11
40 MHz –1000 MHz Application Circuit
25℃ P1dB (dBm) Frequency (MHz) P1dB vs Frequency 200 400 600 800 1000 0.0 0.2 0.4 0.6 0.8 1.0 1.2 25℃ NF (dB) Frequency (MHz) NF vs. Frequency 0 200 400 600 800 1000 25℃ OIP3 (dBm) Frequency (MHz) OIP3 vs Frequency S-Parameter NF vs. Frequency OIP3 vs. Frequency P1dB vs. Frequency 0 200 400 600 800 25℃ CSO (-dBc) Frequency (MHz) CSO vs. Frequency 132 channels, +30dBmV/channel flat loading, 25℃ 0 200 400 600 800 100 25℃ CTB (-dBc) Frequency (MHz) CTB vs. Frequency 132 channels, +30dBmV/channel flat loading, +25℃ CSO vs. Frequency 132 channels, 15dBmV/channel flat loading CTB vs. Frequency 132 channels, 15dBmV/channel flat loading 1) Note 1 : OIP3 measured with two tones at an output power of 3dBm/tone 2) Note 2 : 3V/ 45mA, CSO/CTB Test Condition : 15dBmV/132ch, T=25°C
http://www.prewell.com 3 Low Noise Amplifier SJM PREWELL PL07A Productsand product information are subject to change without notice.Version 0.3 Lead-free /RoHS Compliant / Green 2x2 DFN 8L Package Outline Evaluation Board Layout (27 x 22) XXXX Mounting Instructions 1 Use a large ground pad area with many plated through-holes as shown. 2 We recommend 1 ozcopper minimum. 3 Measurement for our data sheet was made on 1.6mm thick FR-4 Board. 4 RF trace width depends on the board material and construction. 5 Add mounting screws near the part to fasten the board to a heatsink. 6 Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance.