PIT5005T-01 CTMICRO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Features

 No Contact Sensing  5.0mm gap  0.5mm aperture  Opaque black plastic housing  RoHS compliance

Description

The PIT5005T/01 is a slotted optical switch designed for multipurpose non contact sensing. It consists of a GaAs LED and a silicon LOGIC OUPUT sensor packaged in an injection molded housing, facing each other across a 5mm gap. The product is TTL/ CMOS compatible.

Applications

 Infrared sensor Package Outline Schematic

www.ct-micro.com © 202 2 CT MICRO INTERNATIONAL CORPORATION Rev.1 ALL RIGHTS RESERVED. Page 2 Aug, 2022 PIT5005T-01 Optical Logic Output Interrupter Switch Absolute Maximum Rating at 250C Symbol Parameters Ratings Units Notes Topr Operating Temperature -40 ~ +85 0C Tstg Storage Temperature -40 ~ +85 0C Tsol-I Soldering Temperature(Solder Iron) 240 for 5 sec 0C 3,4,5,6 Tsol-F Soldering Temperature (Solder Flow) 240 for 10 sec 0C 3,5,6 Emitter IF Continuous Forward Current 50 mA 6 VR Reverse Voltage 5 V PD Power Dissipation 100 mW 1 Sensor IO Output Current 50 mA VCC Supply Voltage 16 V VO Output Voltage 30 V PD Power Dissipation 150 mW 2 Notes: 1. Derate power dissipation linearly, on Emitter, 1.67 mW/0C above 250C. 2. Derate power dissipation linearly, 2.50 mW/0C above 250C. 3. RMA Flux is recommended. 4. Methanol or isopropyl alcohols are recommended as cleaning agents. 5. Soldering iron tip 1.6mm from housing. 6. As long as leads are not under stress or spring tension.

www.ct-micro.com © 202 2 CT MICRO INTERNATIONAL CORPORATION Rev.1 ALL RIGHTS RESERVED. Page 3 Aug, 2022 PIT5005T-01 Optical Logic Output Interrupter Switch Electro-Optical Characteristics TA = 25°C (unless otherwise specified) Symbol Parameters Test Conditions Min Typ Max Units VCC Recommended Operating Supply Voltage - 4.5 - 5.5 V Emitter VF Forward Voltage IF=20mA - - 1.7 V IR Reverse Leakage Current VR=5V - - 10 μA Coupled ICC Operating Supply Current IF=15mA, or 0mA, VCC=5V - - 5 mA VOL Low Level Output Voltage IF=0mA , VCC=5V, RL=360Ω - - 0.4 V IOH High Level Output Current IF=15mA, or VCC=5V, VOH=30V - - 100 μA IF(+) Turn on Threshold Current VCC=5V, RL=360Ω - - 15 mA IF(-) Turn off Threshold Current VCC=5V, RL=360Ω 0.50 - - mA IF(+)/IF(-) Hysteresis Ratio - - 1.2 - - PPLH, PPHL, Propagation Delay VCC=5V, RL=360Ω - 5 - μs Tr Rise Time VCC=5V, RL=360Ω - 70 - μs Tf Fall Time 70 μs

www.ct-micro.com © 202 2 CT MICRO INTERNATIONAL CORPORATION Rev.1 ALL RIGHTS RESERVED. Page 4 Aug, 2022 PIT5005T-01 Optical Logic Output Interrupter Switch Typical Characteristic Curves

www.ct-micro.com © 202 2 CT MICRO INTERNATIONAL CORPORATION Rev.1 ALL RIGHTS RESERVED. Page 5 Aug, 2022 PIT5005T-01 Optical Logic Output Interrupter Switch Typical Performance Characteristics (Continued)

www.ct-micro.com © 202 2 CT MICRO INTERNATIONAL CORPORATION Rev.1 ALL RIGHTS RESERVED. Page 6 Aug, 2022 PIT5005T-01 Optical Logic Output Interrupter Switch Package Dimension All dimensions are in mm, unless otherwise stated. Notes: 1 : Dimensions for all drawings are in millimeters(inches). 2 : Tolerance of +/- 0.25mm (0.010) on all non nominal dimensions unless otherwise specified.

www.ct-micro.com © 202 2 CT MICRO INTERNATIONAL CORPORATION Rev.1 ALL RIGHTS RESERVED. Page 7 Aug, 2022 PIT5005T-01 Optical Logic Output Interrupter Switch Label Form Specification Label Form Specification Part no: CTM Production Number Serial no: Production Number Lot no: Lot number Q’ty: Packing Quantity Date Code: Manufacture Date Bin Code: Ic Ranks MADE IN CHINA: Production Place Storage Condition 1. Do not open moisture proof bag before the products are ready to use. Shelf life of non-opened bag is 12 months after the bag sealing date. 3. After opening the moisture barrier bag floor life is 72h at 30°C/60%RH. max. Unused LEDs should be resealed into moisture barrier bag. (Refer to J-STD-020 Standard) 4. If the moisture absorbent material has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the J-STD-033 Standard conditions.

www.ct-micro.com © 202 2 CT MICRO INTERNATIONAL CORPORATION Rev.1 ALL RIGHTS RESERVED. Page 8 Aug, 2022 PIT5005T-01 Optical Logic Output Interrupter Switch Reflow Profile Profile Feature Pb-Free Assembly Profile Temperature Min. (Tsmin) 150°C Temperature Max. (Tsmax) 200°C Time (ts) from (Tsmin to Tsmax) 60-120 seconds Ramp-up Rate (tL to tP) 3°C/second max. Liquidous Temperature (TL) 217°C Time (tL) Maintained Above (TL) 60 – 150 seconds Peak Body Package Temperature 260°C +0°C / -5°C Time (tP) within 5°C of 260°C 30 seconds Ramp-down Rate (TP to TL) 6°C/second max Time 25°C to Peak Temperature 8 minutes max.

www.ct-micro.com © 202 2 CT MICRO INTERNATIONAL CORPORATION Rev.1 ALL RIGHTS RESERVED. Page 9 Aug, 2022 PIT5005T-01 Optical Logic Output Interrupter Switch DISCLAIMER CT MICRO RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. CT MICRO DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. CT MICRO ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT EXPRESS WRITTEN APPROVAL OF CT MICRO INTERNATIONAL CORPORATION. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instruction for use provided in the labelling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.