PIR67-21C EVERLIGHT | Alldatasheet
Document overview
- Manufacturer or author: pROVIDED bY alldatasheet.com(free datasheet download site)
- PDF pages: 10
Technical content
Features
․Low forward voltage. ․Compatible with infrared and vapor phase reflow solder process. ․Package in 8mm tape on 7” diameter reels. ․Size of emitting area 0.370mm * 0.370mm ․Pb free ․Typical peak wavelength 740nm ․The product itself will remain within RoHS compliant version Descriptions ․PIR67-21C/L231/TR8 is an infrared emitting diode in miniature SMD package which is molded in a water clear plastic with spherical top view lens. ․The device is spectrally matched with silicon photodiode and phototransistor.
Applications
․Sensor technology ․IR free air transmission ․For drive and control circuits ․Optoelectronic switch ․Infrared applied system Device Selection Guide Chip LED Part No. Material Epoxy color PIR67-21C/L231/TR8 AIGaAs Water clear
Everlight Electronics Co., Ltd. http:\\\\ www.everlight.com Rev 3 Page: 2 o f 10 Device No ： DTR-067-249 Prepared date ： 06-08-2007 Prepared by ： Daniel Yang 1.5 1.5 1.5 Ano de Ca t h od e PIR67-21C/L231/TR8 Package Dimensions Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimensions ±0.1mm Absolute Maximum Ratings (Ta=25 ℃℃ ℃℃) Parameter Symbol Rating Units Continuous Forward Current I F 100 mA Reverse Voltage V R 5 V Surge current(t=10μs) IFSM 1 A Operating Temperature T opr -40 ~ +100 ℃ Storage Temperature T stg -40 ~ +100 ℃ Thermal resistance junction to ambient mounted on PC-board R thJA 210 K/W Thermal resistance junction to soldering point,mounted on metal block R thJS 260 K/W Soldering Temperature *1 T sol 260 ℃ Power Dissipation at(or below) ℃Free Air Temperature Pd 190 mW Notes: : *1:I FP Conditions--Pulse Width ≦100 μs and Duty ≦1%. *2:Soldering time ≦10 seconds.
Everlight Electronics Co., Ltd. http:\\\\ www.everlight.com Rev 3 Page: 3 o f 10 Device No ： DTR-067-249 Prepared date ： 06-08-2007 Prepared by ： Daniel Yang PIR67-21C/L231/TR8 Electro-Optical Characteristics (Ta=25 ℃℃ ℃℃) Parameter Symbol Condition Min. Typ. Max. Units IF=20mA -- 2.5 -- Radiant Intensity Ie IF=50mA 3.0 6.0 -- mW/sr Total Radiated Power Po I F=50mA -- 18 -- mW Peak Wavelength λp IF=20mA 725 740 755 nm Spectral Bandwidth Δλ IF=20mA -- 30 -- nm IF=20mA -- 1.8 2.2 Forward Voltage V F IF=50mA -- 2.0 2.8 V Reverse Current I R VR=5V -- -- 10 μA Rise Time tr IF=50mA -- 80 -- ns Fall Time tf IF=50mA -- 80 -- ns Capacitance C o VR=0V, f=1MHz -- 55 -- pF View Angle 2θ1/2 IF=20mA -- 120 -- deg Active chip area A --- 0.140 mm 2 Dimensions of the active chip area L*W --- 0.370*0.370 mm*mm
Everlight Electronics Co., Ltd. http:\\\\ www.everlight.com Rev 3 Page: 4 o f 10 Device No ： DTR-067-249 Prepared date ： 06-08-2007 Prepared by ： Daniel Yang 1.2 1.6 2.0 100 2.8 2.4 -40 -20 40 20 0 60 100 80 100 120 140 120 680
100 IF=20mA
Ta=25°C 700 720 740 760 780 800 820 840 75 -25 700 720 740 25 50 760 780 100 PIR67-21C/L231/TR8 Typical Electro-Optical Characteristics Curves Fig.1 Forward Current vs. Ambient Fig.2 Sp ectral Distributio n Temperature Fig.3 Peak Emission Wavelength vs. Fig.4 For ward Current vs. Forward Voltage Ambient Temperature
Everlight Electronics Co., Ltd. http:\\\\ www.everlight.com Rev 3 Page: 5 o f 10 Device No ： DTR-067-249 Prepared date ： 06-08-2007 Prepared by ： Daniel Yang PIR67-21C/L231/TR8 Typical Electro-Optical Characteristics Curves Fig.5 Relative Radiant Intensity vs. Angular Displacement -90 -80 -70 -60 -50 -40 -30 -20 -10 0 0.0 0.2 0.4 0.6 0.8
1.0 R e la tiv e In te n s ity
Angle(Degree) 0 10 20
Everlight Electronics Co., Ltd. http:\\\\ www.everlight.com Rev 3 Page: 6 o f 10 Device No ： DTR-067-249 Prepared date ： 06-08-2007 Prepared by ： Daniel Yang PIR67-21C/L231/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30 ℃ or less and 90%RH or less. 2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30
℃ or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 da ys) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions. Baking treatment : 60 ±5℃ for 48 hours. 3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd. http:\\\\ www.everlight.com Rev 3 Page: 7 o f 10 Device No ： DTR-067-249 Prepared date ： 06-08-2007 Prepared by ： Daniel Yang PIR67-21C/L231/TR8 4.Soldering Iron Each terminal is to go to the tip of soldering iro n temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs hav e been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
Everlight Electronics Co., Ltd. http:\\\\ www.everlight.com Rev 3 Page: 8 o f 10 Device No ： DTR-067-249 Prepared date ： 06-08-2007 Prepared by ： Daniel Yang PIR67-21C/L231/TR8 Reliability Test Item And Condition The reliability of products shall be satisfied with items listed below. Confidence level ：90% LTPD ：10% NO. Item Test Conditions Test Hours/ Cycles Sample Sizes Failure Judgement Criteria Ac/Re 1 REFLOW TEMP. ：260℃± 5℃ 10secs 6Mins 22pcs 0/1
2 Temperature Cycle H : 100 ℃ 15mins
L : -40 ℃ 15mins 50Cycles 22pcs 0/1
3 Thermal Shock H :+100 ℃ 5mins
L :-10 ℃ 5mins 50Cycles 22pcs 0/1
4 High Temperature
TEMP. ：+100 ℃ 1000hrs 22pcs 0/1
5 Low Temperature
TEMP. ：-40 ℃ 1000hrs 22pcs 0/1
6 DC Operating Life I F=20mA 1000hrs 22pcs 0/1
7 High Temperature/
85 ℃ / 85% R.H 1000hrs 22pcs I R≧U×2 Ie ≦L×0.8 VF≧U×1. 2 U ：Upper Specification Limit L ：Lower Specification Limit
Everlight Electronics Co., Ltd. http:\\\\ www.everlight.com Rev 3 Page: 9 o f 10 Device No ： DTR-067-249 Prepared date ： 06-08-2007 Prepared by ： Daniel Yang PIR67-21C/L231/TR8 Package Dimensions Taping Dimensions Unit: mm
Everlight Electronics Co., Ltd. http:\\\\ www.everlight.com Rev 3 Page: 10 of 10 Device No ： DTR-067-249 Prepared date ： 06-08-2007 Prepared by ： Daniel Yang RoHS PIR67-21C/L231/TR8 Packing Quantity Specification 1.2000Pcs/1Volume ，1Volume/1Bag 2.10Boxes/1Carton Label Form Specification CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Peak Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, F ax: 886-2267-6244, 2267-6189, 2267-6306 Tucheng, Taipei 236, Taiwan, R.O.C http:\\\\ www.everlight.com PIR67-21C/L231/TR8