DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

  • High-performance solution to switch between video sources Wide bandwidth: 570 MHz (typical)
  • Low On-Resistance: (typical)
  • Low crosstalk at MHz: –80dB
  • Ultra-low quiescent power (0.1µA typical) Single supply operation: +5.0V
  • Fast switching: 10ns
  • ESD 5KV HBM, 10KV I/O to GND
  • Packaging (Pb-free Green A vailable): 16-pin 150-mil wide plastic SOIC (W) 16-pin 150-mil wide plastic QSOP (Q) PI5V330S Low On-Resistance Wideband/Video Quad 2-Channel Mux/DeMux Block Diagram

Description

Pericom Semiconductor ’s PI5V330S is a true bidirectional Quad 2-channel multip lexer/demultiplexer recommended for both RGB and composite video switching applications. The video switch can be driven from a current output RAMDAC or voltage output composite video source. Low On-Resistance and wide bandwidth make it ideal for video and other applications. Also this device has exceptionally high current capability which is far greater than most analog switches of fered today A single 5V supply is all that is required for operation. The PI5V330S of fers a high-performance, low-cost solution to s witch b etween v ideo s ources. T he a pplication s ection d escribes t he PI5V330S replacing the HC4053 multiplier and buffer/amplifier. Pin Configuration Pin Description Pin Name Description S1A, S1B, S1C, S1D S2A, S2B, S2C, S2D Analog V ideo I/O IN Select Input EN Enable DA, DB DC, DD Analog V ideo I/O GND Ground VDD Power VDD EN S1D S2D DD S1C S2C DC IN S1A S2A DA S1B S2B DB GND S1A S2A S1B S2B S1C S2C S1D S2D DA DB DC DD EN IN DECODER/DRIVERS 13-0016

2 PS7032I 12/12/12

Low On-Resistance Wideband/Video Quad 2-Channel Mux/DeMux Ambient T emperature with Power Applied to +85°C Supply V oltage to Ground Potential (Inputs VDD Only) .. –0.5V to +7.0V Supply V oltage to Ground Potential (Outputs D/O Only) –0.5V to +7.0V DC Input V –0.5V to +7.0V DC Output Current Power Dissipation Note: Stresses greater than those listed under MAXIMUM RA INGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Ex posure to absolute maximum rating conditions for extended periods may affect reliability. Notes: 1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VDD = 5.0V, TA = 25°C ambient and maximum loading. Measured by the voltage drop between S1, S2, and D I/O pins at indicated current through the switch. On-Resistance is determined by the lower of the voltages on the S1, S2, and D I/O pins. Maximum Ratings (Above which the useful life may be impaired. For user guidelines, not tested.) Parameters Description Test Conditions(1) Min. Typ. (2) Max. Units VANALOG Analog Signal Range 0 2.0 VVIH Input HIGH V oltage Guaranteed Logic HIGH Level 2.0 - VIL Input LOW V oltage Guaranteed Logic LOW Level –0.5 0.8 IIH Input HIGH Current VDD = Max., VIN = VDD ±1 µAIIL Input LOW Current VDD = Max., VIN = GND ±1 IO Analog Output Leakage Current 0 ≤ S1, S2 or D ≤ VDD, Switch OFF ±1 VIK Clamp Diode V oltage VDD = Min., IIN = -18mA -0.7 -1.2 V VH Input Hysteresis at Control Pins 150 - mV RON Switch On-Resistance(3) VDD = Min., VIN = 1.0V, ION = 13mA 5 7 ΩVDD = Min., VIN = 2.0V, ION = 26mA 7 10 13-0016

3 PS7032I 12/12/12

Low On-Resistance Wideband/Video Quad 2-Channel Mux/DeMux Power Supply Characteristics Parameters Description Test Conditions(1) Min. Typ (2) Max. Units ICC Quiescent Power Supply Current VDD = Max. IN = GND or VDD 0.1 3.0 µA ∆ICC Supply Current per Input TTL HIGH VDD = Max. IN = 3.4V(3) 2.5 mA ICCD Supply Current per Input per MHz(4) VDD = Max., S1, S2 and D Pins Open EN GND Control Input T oggling 50% Duty Cycle 0.25 mA/ MHz Notes: 1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device. 2. Typical values are at VDD = 5.0V, +25°C ambient. Per TTL driven input (VIN = 3.4V , control inputs only); S1, S2, and D pins do not contribute to ICC. 4. This current applies to the control inputs only and represent the current required to switch internal capacitance at the specified frequency. The S1, S2, and D I/O pins generate no significant AC or DC currents as they transition. This parameter is not tested, but is guaranteed by design. Notes: 1. This parameter is determined by device characterization but is not production tested. Dynamic Characteristics (Over the Operating Range, TA = –40°C to +85°C, VDD = 5V ±5%) Parameters Description Test Conditions Min. Typ. Max. Unit tON Turn On T ime RL = 75Ω, CL = 20PF, See Fig. 4 2.5 5 nstOFF Turn Off T ime RL = 75Ω, CL = 20PF, See Fig. 4 1.1 5 BW(1) -3 dB Bandwidth See Fig. 5 570 MHz XTALK Crosstalk 10MHz, See Fig. 5, CL = 0pF -80 dB CIN(1) Input/Enable Capacitance V IN = 0V, f = 1 MHz 6 pFCOFF(1) Capacitance, Switch Off V IN = 0V, f = 1 MHz 6 CON(1) Capacitance, Switch On V IN = 0V, f = 1 MHz 9 OIRR Off Isolation 10MHz, See Fig 5, CL = 0pF -48 dB 13-0016

4 PS7032I 12/12/12

Low On-Resistance Wideband/Video Quad 2-Channel Mux/DeMux Definitions Symbol Description RON Resistance between source and drain with switch in the ON state. IO Output leakage current measured at S1, S2, and D with the switch OFF. VIN Digital voltage at the IN pin that selects between S1 and S2 analog inputs. VEN A voltage that ENABLES the chip. CIN Capacitance at the digital inputs. COFF Capacitance at analog I/O (S1, S2, D) with switch OFF. CON Capacitance at analog I/O (S1, S2, D) with switch ON. VIH Minimum input voltage for logic HIGH. VIL Minimum input voltage for logic LOW. IIH (IIL) Input current of the digital input. tON Propagation delay measured between 50% of the digital input to 90% of the analog output when switch is turned ON. The peak analog voltage is 0.714V. tOFF Propagation delay measured between 50% of the digital input to 90% of the analog output when switch is turned OFF. The peak analog voltage is 0.714V. BW Frequency response of the switch in the ON state measured at 3dB down. XTALK Is an unwanted signal coupled from channel to channel. Measured in –dB. XTA lk = 20 LOG Vou T/VIN. This is non-adjacent crosstalk. OIRR Off isolation is the resistance (measured in –dB) between the input and output with the switch off (NO). 13-0016

5 PS7032I 12/12/12

Figure 1. Gain vs Frequency Figure 2. Off Isolation vs Frequency

6 PS7032I 12/12/12

Figure 3. Crosstalk vs Frequency Figure 4. Switching Time Figure 5. Gain/Phase, Crosstalk, Off-Isolation

7 PS7032I 12/12/12

Low On-Resistance Wideband/Video Quad 2-Channel Mux/DeMux Packaging Mechanical: 16-pin SOIC (W) DESCRIPTION: 16-Pin, 150mil Wide SOIC PACKAGE CODE: W DOCUMENT CONTROL #: REVISION: F DATE: 06 /15/12 DATE: 06 /15/12 PD-1004 2012-0398 13-0016

8 PS7032I 12/12/12

Low On-Resistance Wideband/Video Quad 2-Channel Mux/DeMux Packaging Mechanical: 16-pin QSOP (Q) .189 .197 .053 .069 .004 .010 SEATING PLANE .025 BSC .007 .010 .228 .244 .150 .157 X.XX X.XX DENOTES DIMENSIONS IN MILLIMETERS 0.635 4.80 5.00 1.35 1.75 5.79 6.19 0.101 0.254 .008 .012 0.203 0.305 3.81 3.99 0.178 0.254 0.38 .008 0.203 .015 x 45° REF Detail A Detail A .008 0.20 MIN. Guage Plane .010 0.254 .041 1.04 REF .016 .035 0.41 0.89 0˚-6˚ .008 .013 0.20 0.33 DESCRIPTION: 16-Pin 150-Mil Wide QSOP PACKAGE CODE: Q DOCUMENT CONTROL NO. PD - 1201 REVISION: G DATE: 11/07/07 Note: 1) Controlling dimensions in inches. 2) Ref: JEDEC MO-137B/AB. 3) Dimensions do not include mold flash, protrusions or gate burrs Pericom Semiconductor Corporation 3545 N. 1st Street, San Jose, CA 95134 1-800-435-2335

  • www.pericom.com

Ordering Information

Ordering Code Package Code Package Description PI5V330SWE W Pb-free Green, 16-pin 150-mil wide plastic SOIC PI5V330SQE Q Pb-free Green, 16-pin 150-mil wide plastic QSOP Notes: 1. Thermal characteristics can be found on the company web site at www.pericom.com/packaging/ 2. E Pb-free and Green 3. Adding an X suffix T ape/Reel Pericom Semiconductor Corporation • 1-800-435-2336 • www .pericom.com 13-0016