PI5A127 PERICOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

  • Single-Supply Operation (+2V to +6V)
  • Rail-to-Rail Analog Signal Dynamic Range
  • Low On-Resistance (7.2-ohm with 5V supply) Minimizes Distortion and Error Voltages
  • On-Resistance Flatness, 3-ohm typ.
  • Low Charge Injection Reduces Glitch Errors. Q = 1.6pC typ.
  • High Speed. tON = 7ns typ.
  • Wide –3dB Bandwidth: 326 MHz
  • High-Current Channel Capability: >100mA
  • TTL/CMOS Logic Compatible
  • Low Power Consumption (5μW typ.)
  • Packaging (Pb-free & Green Available) — 8-pin, 118 mil plastic MSOP (U) — 8-pin, 150 mil plastic SOIC (W)

Applications

  • Audio, Video Switching and Routing
  • Battery-Powered Communication Systems
  • Computer Peripherals
  • Telecommunications
  • Portable Instrumentation
  • Mechanical Relay Replacement
  • Cell Phones
  • PDAs cigoL7 21A5IP 1F FO 0N O Functional Diagrams, Pin Configurations and Truth Tables 1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901 2123456789012 1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901 2123456789012 Top View Switches shown for logic “0” input

2 PS8328E 01/26/06

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901 2123456789012 1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901 2123456789012 PI5A127 Dual,Wide Bandwidth Analog Switch Caution: Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress onl y rating and operation of the device at these or any other conditions beyond those indicated in the operational sections of this specifi cation is not implied. Electrical Specifications - Single +5V Supply (V+ = +5V ±10%, GND = 0V, VINH = 2.4V, VINL = 0.8V) Absolute Maximum Ratings Voltages Referenced to GND Note 1: Signals on NC, NO, COM, or IN exceeding V+ or GND are clamped by internal diodes. Limit forward diode current to 30mA. Thermal Information Continuous Power Dissipation retemaraPl obmySs noitidnoC) C°(.pmeT. niM )2( .pyT )1( .xaM )2( stinU hctiwSgolanA egnaRlangiSgolanA )3( V GOLANA lluF0 V + V ecnatsiseRnOR NO I,V5.4=+V MOC ,Am03–= V ON Vro CN V5.2+= 522 .70 1 Ω lluF2 1 taMecnatsiseR-nOh c slennahCneewteB )4( ΔR NO 520 2.02 lluF4 ecnatsiseR-nO ssentalF )5( R )NO(TALF V+ , V5= I MOC =– , Am03 V ON Vro CN =1 V , , V5.2V 4 522 7.25 .3 lluF4 akaeLffOCNroONe g tnerruC )6( I ro)FFO(ON I )FFO(CN V+ V ,V5.5= MOC ,V0= V ON Vro CN V5.4= 528 1.0 An lluF0 02–0 02 akaeLffOMOCe g tnerruC )6( I )FFO(MOC V+ , V5.5= V MOC =+ V ,V5.4 ON Vro CN V0±= 520 2.0 lluF0 02–0 02 akaeLnOMOCe g tnerruC )6( I )NO(MOC V+ V ,V5.5= MOC =+ V5.4 V ON Vro CN V5.4+= 520 . 0 2 lluF0 02–0 02 Notes: 1. The algebraic convention, where the most negative value is a minimum and the most positive is a maximum, is used in this data sheet. 2. Typical values are for DESIGN AID ONLY, not guaranteed or subject to production testing. 3. Guaranteed by design 4. ΔR ON = RON max - RON min. 5. Flatness is defined as the difference between the maximum and minimum value of ON-resistance measured. 6. Leakage parameters are 100% tested at maximum rated hot temperature and guaranteed by correlation at +25ºC.

3 PS8328E 01/26/06

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901 2123456789012 1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901 2123456789012 PI5A127 Dual,Wide Bandwidth Analog Switch Electrical Specifications - Single +5V Supply (continued) (V+ = + 5V ±10%, GND = 0V, VINH = 2.4V, VINL = 0.8V) Notes: 1. The algebraic convention, where the most negative value is a minimum and the most positive is a maximum, is used in this data sheet. 2. Typical values are for DESIGN AID ONLY, not guaranteed or subject to production testing. 3. Guaranteed by design. retemaraPl obmySs noitidnoCp meT )Cº( .niM )1( .pyT )2( .xaM )1( stinU tupnIcigoL egatloVhgiHtupnIV HI leveLhgiHcigoldeetnarauG lluF V egatloVwoLtupnIV LI leveLwoLcigoldeetnarauG8 .0 hgiHegatloVhtiwtnerruCtupnII HNI V NI ,V4.2=s rehtollaV 8.0=1 –5 00.01 woLegatloVhtiwtnerruCtupnII LNI V NI ,V8.0=s rehtollaV 4.2=1 –5 00.01 cimanyD emiTnO-nruTt NO V CC 1erugiF,V5= 527 5 1 sn lluF0 2 emiTffO-nruTt FFO 521 7 lluF0 1 noitcejnIegrahC )3( Q CL 1=n , V0=negV,F 0=negR Ω,e rugiF2 6.10 1C p noitalosIffOR RIO RL 05= Ω C, L 5=p , F f= 3 erugiF,zHM01 34– Bd klatssorCX k lat RL 05= Ω C, L 5=p , F f= 4 erugiF,zHM01 34– ecnaticapaCONroCNC ) ffo( f= 5 erugiF,zHk1 5.5 FpecnaticapaCffOMOCC ) ffo(moc5 .5 ecnaticapaCnOMOCC ) no(mocf = 6 erugiF,zHk13 1 htdiwdnaBBd3-W BR L 05= Ω F,e rugi7 lluF 623z HM noitrotsiDD R L =012 .0% ylppuS egnaRylppuS-rewoP+ V lluF 26 V tnerruCylppuSevtisoP+ I V+ V ,V5.5= NI =V0 Vro CC ,+V fforonoslennahCllA 1A μ

4 PS8328E 01/26/06

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901 2123456789012 1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901 2123456789012 PI5A127 Dual,Wide Bandwidth Analog Switch retemaraPl obmySs noitidnoCp meT. )Cº( niM. )1( pyT. )2( xaM. )1( stinU hctiwSgolanA egnaRlangiSgolanA )3( V GOLANA 0+ VV ecnatsiseR-nOR NO V, V3=+I MOC 03–=m , A V ON roV CN V5.1= 522 18 1 Ω lluF2 2 hctaMecnatsiseR-nO slennahCneewteB )4( ΔR NO V, V3.3=+I MOC 03–=m , A V ON roV CN V5.2,V8.0= 521 1 lluF2 ssentalFecnatsiseR-nO )5,3( R )NO(TALF 525 .34 lluF5 cimanyD emiTnO-nruTt NO V,V3.3=+V ON roV CN ,V5.1=e rugiF1 524 15 2 sn lluF0 4 emiTffO-nruTt FFO 525 .42 1 lluF0 2 noitcejnIegrahC )3( Q CL 1=n V ,F NEG ,V0= R NEG 0=V , e rugiF2 523 .10 1C p ylppuS tnerruCylppuS+ I V+ V ,V6.3= NI =+ VroV0 fforonoslennahCllA lluF1 μA Electrical Specifications - Single +3.3V Supply (V+ = +3.3V ±10%, GND = 0V, VINH = 2.4V, VINL = 0.8V) Notes: 1. The algebraic convention, where the most negative value is a minimum and the most positive is a maximum, is used in this data sheet. 2. Typical values are for DESIGN AID ONLY, not guaranteed or subject to production testing. 3. Guaranteed by design 4. ΔR ON = RON max - RON min. 5. Flatness is defined as the difference between the maximum and minimum value of ON-resistance measured.

5 PS8328E 01/26/06

Figure 1. Switching Time Figure 2. Charge Injection

6 PS8328E 01/26/06

Figure 3. Off Isolation Figure 5. Channel-Off Capacitance Figure 4. Crosstalk Figure 6. Channel-On Capacitance Figure 7. Bandwidth

7 PS8328E 01/26/06

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901 2123456789012 1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901 2123456789012 PI5A127 Dual,Wide Bandwidth Analog Switch 15˚ MAX 15˚ MAX Detail A Detail A .112 .120 2.85 3.05 .114 .122 2.90 3.10 .114 .122 2.90 3.10 .010 0˚- 6˚ 15˚ Max. 15˚ Max.0.25 Gauge Plane .003 .012 .016 .028 .037 0.40 0.700.95 REF 0.07 0.30 .003 .012 0.07 0.30 Package Mechanical: 8-Pin MSOP (U) Ordering Code Package Code Package Type PI5A127UX U 8-pin MSOP PI5A127UEX U Pb-free & Green, 8-pin MSOP (Tape/Reel) PI5A127W W Narrow 8-pin SOIC PI5A127WX W Narrow 8-pin SOIC (Tape/Reel)

Ordering Information

Pericom Semiconductor Corporation • 1-800-435-2336 • http://www.pericom.com .0040 .0098 SEATING PLANE .013 .020 .050 BSC .016 .0075 .0098 .0099 .0196 0-8° .050 .149 .157 X.XX X.XX DENOTES DIMENSIONS IN MILLIMETERS 3.78 3.99 .189 .196 4.80 5.00 1.27 .016 .026 1.35 1.75 .2284 .2440 5.80 6.20 0.406 0.660 0.330 0.508 0.10 0.25 0.40 1.27 0.19 0.25 0.25 0.50 x 45° .053 .068 REF Package Mechanical: 8-Pin SOIC (W)