PI49FCT3805DQE | DigiCamel IC Datasheet

Online Datasheet

Read PI49FCT3805DQE online.

PI49FCT3805D_04 PERICOM | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 8

Technical content

Features

Low output skew: <200ps
Switching frequency up to 166 MHz
Fast output rise/fall time: <1.0ns
Low propagation delay: <2.5ns
Low input capacitance: <6.0pF
Balanced CMOS outputs
Industrial Temperature: –40°C to +85°C
3.3V ±10% operation, 5V Input Tolerant
Packaging (Pb-free & Green available): – 20-pin 300-mil wide SOIC (S) – 20-pin 150-mil wide QSOP (Q) – 20-pin 209-mil wide SSOP (H) – 20-pin 173-mil wide TSSOP (L) Pin Description Pin Name Deescription OEX Hi-Z State Output Enable Inputs (Active Low) INX Clock Inputs OAN, OBN Clock Outputs MON Monitor Output GND Ground VCC Power Truth Table(1) Inputs Outputs OEX INX OAX MON L L L L L H H H H L Z L H H Z H Note: 1. H = High V oltage Level, L = Low V oltage Level, Z = High Impedance Pin Configuration VCCBVCC 1 2 0 OB0OA0 2 1 9 OB1OA1 3 1 8 GNDB OA2 4 1 7 OB2 GNDA 5 1 6 OB3OA3 6 1 5 OB4OA4 7 1 4 MONGNDQ 8 1 3 OEBOEA 9 1 2 INBINA 10 11 OEB INA OA0Ð4 INB OEA OB0Ð4 MON

2 PS8492C 09/08/04

3.3V , 2 x 1:5 CMOS Clock Driver Note: Stresses greater than those listed under MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Maximum Ratings (Above which the useful life may be impaired. For user guidelines, not tested.) Notes: 1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC = 3.3V , +25°C ambient and maximum loading. 3. VOH = VCC – 0.6V at rated current. 4. This parameter is determined by device characterization but is not production tested. 5. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. Symbol Parameters Test Conditions(1) Min. Typ. Max. Units VOH Output High V oltage VCC = Min., VIN = VIL or VIH IOH = -0.1mA IOH = -8mA IOH = -12mA VCC-0.2 2.4(3) 2.4(3) 3.0 3.0 VVOL Output Low V oltage VCC = Min., VIN = VIL or VIH IOH = 0.1mA IOH = 8mA IOH = 12mA 0.2 0.3 0.2 0.4 0.4 VIH Input High V oltage Low Logic 2.0 5.5 VIL Input Low V oltage High Logic -0.5 0.8 IIH Input High Current VCC = Max., VIN = 5.5V 1 µAIIL Input Low Current VCC = Max., VIN = GND -1 IOZH IOZL High Impedance output current VCC = Max., all outputs disabled VOUT = VCC VOUT = GND VIK Clamp Diode V oltage VCC = Min., IIN = -18mA -0.7 -1.2 V IODH Output High Current(4, 5) VOUT = 1.5V , VIN = VIL or VIH, VCC = 3.3V -40 -74 -100 mAIODL Output Low Current(4, 5) VOUT = 1.5V , VIN = VIL or VIH, VCC = 3.3V 50 90 130 IOS Short Circuit Current(4, 5) VCC = Max., VOUT = GND -60 -100 -120

3 PS8492C 09/08/04

3.3V , 2 x 1:5 CMOS Clock Driver Notes: 1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device. 2. Typical values are at VCC = 3.3V , +25°C ambient. 3. Per TTL driven input (VIN = VCC – 0.6V); all other inputs at VCC or GND. Note: 1. This parameter is determined by device characterization but is not production tested. Capacitance (TA = 25°C, f = 1 MHz) Parameters(1) Description Test Conditions Typ Max. Units CIN Input Capacitance VIN = 0V 3.0 4 pFCOUT Output Capacitance VOUT = 0V — 6 Power Supply Characteristics Parameters Description Test Conditions(1) Min. Typ. (2) Max. Units ICC Quiescent Power Supply Current VCC = Max. VIN = GND or VDD 0.1 30 µA IDD Dynamic Supply Current per Output VCC = 3.6V , CL = 15pF, All Outputs Toggling 80 120 IC Total Power Supply Current VCC = 3.6V , CL = 15pF, All Outputs Toggling, fi = 133 MHz VIN = VCC or GND 100 135 mA/ MHz VIN = VCC -0.6V or GND 100 135 VCC = 3.6V , CL = 15pF, All Outputs Toggling, fi = 166 MHz VIN = VCC or GND 120 160 VIN = VCC -0.6V or GND 120 160 ∆ICC Supply Current per inputs @ TTL High VCC = Max. VIN = VCC -0.6V(3) 45 300 µA

4 PS8492C 09/08/04

3.3V , 2 x 1:5 CMOS Clock Driver Switching Characteristics over Operating Range Parameters Description Test Conditions(1) 3805D 3805E UnitsMax. Max. tPLH tPHL Propagation Delay INN to ON CL = 15pF,

133 MHz (3805D)

166 MHz (3805E)

3.0 2.5 tR/tF CLKn Rist/Fall Time 0.8V ~ 2.0V 1.5 1.0 ns tSK(o)(3) Pulse Skew 270 270 pstSK(p)(3) Output Skew 270 200 tSK(t)(3) Package Skew 550 550 tZL, tZH, tLZ, tHZ Enable/Disable Time 5.2 5.0 ns FMAX Input Frequency 133 166 MHz Switch Position Test Switch Disable LOW Enable LOW 6V Disable HIGH Enable HIGH GND All Other Inputs Open Definitions: 1. CL = Load capacitance: includes jig and probe capacitance. 2. RT = Termination resistance: should be equal to ZOUT of the Pulse Generator. Tests Circuit Note: 1. These parameters are guaranteed by design 2. Series Resistor loading = 33Ω (See Test Circuit) Pulse Generator f = 125MHz D.U.T. 50Ω 33Ω CL 15pF VCC Enable/Disable Time Test Set-Up Pulse Generator D.U.T. 500Ω 33Ω 50Ω 500Ω CL 15pF VCC S

5 PS8492C 09/08/04

3.3V , 2 x 1:5 CMOS Clock Driver Switching Waveforms Output Skew – tSK(o) Pulse Skew – tSK(p) Package Skew – tSK(t) Propagation Delay Enable and Disable Times Input tPLH 1.5V Output VOH 1.5V VOL tPHL Input tPLHx 1.5V Ox VOH 1.5V VOL tPHLx tSK(o) Oy VOH 1.5V VOL tSK(o) tPLHy tPHLy tSK(o) = | tPLHy Ð tPLHx | or | tPHLy Ð tPHLx | tPZL OE 1.5V 1.5V 3.0V 1.5V tPLZ VOL 3.0V tPZH tPHZ 0.3V 0.3V Output Normally Low Output Normally High Switch Closed Switch Open VOH Enable Disable tPZL OE 1.5V 1.5V 3.0V 1.5V tPLZ VOL 3.0V tPZH tPHZ 0.3V 0.3V Output Normally Low Output Normally High Switch Closed Switch Open VOH Enable Disable Input tPLH1 1.5V Package 1 Output VOH 1.5V VOL tPHL1 tSK(t) Package 2 Output VOH 1.5V VOL tSK(t) tPLH2 tPHL2 tSK(t) = | tPLH2 Ð tPLH1 | or | tPHL2 Ð tPHL1 |

6 PS8492C 09/08/04

3.3V , 2 x 1:5 CMOS Clock Driver Packaging Mechanical: 20-Pin 300-mil wide SOIC (S) Packaging Mechanical: 20-Pin 150-mil wide QSOP (Q) SEATING PLANE .050 BSC 0-8˚ .2914 .2992 X.XX X.XX DENOTES CONTROLLING DIMENSIONS IN MILLIMETERS 7.40 7.60 .496 .511 12.60 12.99 1.27 .0926 .1043 2.35 2.65 .394 .419 10.00 10.65 .0040 .0118 0.10 0.30.013 .020 0.33 0.51 .010 .029 0.254 0.737 .0091 .0125 0.23 0.32 0.41 1.27 .016 .050 x 45˚ .020 .030 0.508 0.762 REF .337 .344 .053 .069 .004 .010 SEATING PLANE .025 BSC .007 .010 .228 .244 .150 .157 .016 .050 X.XX X.XX DENOTES DIMENSIONS IN MILLIMETERS 0.635 8.56 8.74 1.35 1.75 5.79 6.19 0.41 1.27 0.101 0.254 .008 .012 0.203 0.305 3.81 3.99 0.178 0.254 .058 1.47 .015 x 45˚ 0.38REF Detail A Detail A .008 0.20 MIN. Guage Plane .010 0.254 .041 1.04 REF .016 .035 0.41 0.89 0˚-6˚ .008 .013 0.20 0.33

7 PS8492C 09/08/04

3.3V , 2 x 1:5 CMOS Clock Driver Packaging Mechanical: 20-Pin 209-mil wide SSOP (H) .272 .295 .078 .002 SEATING PLANE .0098 Max. .0256 BSC .022 .037 .004 .009 .291 .322 .197 .220 0.25 X.XX X.XX DENOTES DIMENSIONS IN MILLIMETERS 0.050 7.40 8.20 0.55 0.95 0.09 0.25 5.00 5.60 2.00 6.90 7.50 0.65 Max Min Packaging Mechanical: 20-Pin 173-mil wide TSSOP (L) .252 .260 .047 1.20 .002 .006 SEATING PLANE .0256 BSC .018 .030 .004 .008 .238 .269 .169 .177 X.XX X.XX DENOTES CONTROLLING DIMENSIONS IN MILLIMETERS 0.05 0.15 6.1 6.7 0.45 0.75 0.09 0.20 4.3 4.5 6.4 6.6 0.65 0.19 0.30 .007 .012 Max

8 PS8492C 09/08/04

3.3V , 2 x 1:5 CMOS Clock Driver

Ordering Information

Ordering Code Package Code Package Description PI49FCT3805DH H 20-pin 209-mil SSOP PI49FCT3805DHE H Pb-free & Green, 20-pin 209-mil SSOP PI49FCT3805DQ Q 20-pin 150-mil QSOP PI49FCT3805DQE Q Pb-free & Green, 20-pin 150-mil QSOP PI49FCT3805DS S 20-pin 300-mil SOIC PI49FCT3805DSE S Pb-free & Green, 20-pin 300-mil SOIC PI49FCT3805EH H 20-pin 209-mil SSOP PI49FCT3805EH H 20-pin 209-mil SSOP PI49FCT3805EQ Q 20-pin 150-mil QSOP PI49FCT3805EQ Q 20-pin 150-mil QSOP PI49FCT3805EL L 20-pin 173-mil TSSOP PI49FCT3805EL L 20-pin 173-mil TSSOP Notes: 1. Thermal characteristics can be found on the company web site at www.pericom.com/packaging/ 2. Number of Transistors = TBD Pericom Semiconductor Corporation • 1-800-435-2336 • www.pericom.com

Product Information

PI49FCT3805DQE specifications and overview.

Summary

3.3V, 2 x 1:5 CMOS Clock Driver

Description

3.3V, 2 x 1:5 CMOS Clock Driver

Source title PI49FCT3805DQE Datasheet(PDF) - Pericom Semiconductor Corporation

Related Parts

More parts from the same family.

Browse manufacturer