PG451 SJM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Features
- 300 to 3000MHz
- Gain 20.3dB @ 900MHz
- P1dB 23.3dBm @ 2100MHz
- OIP3 38.3dBm @ 2100MHz
- Lead-free / Green / compliant SOT-89 Package
Applications
1 ESD sensitive device. Observe handling precautions.
2 HBM: Class 1C, JESD22-A114
3 CDM: Class C3 , JESD22-
4 MSL 3, J-STD-020
- Base station / Repeater / Mobile / Automotive / Military – FDD-LTE, TD-LTE, TDS-CDMA, CDMA, WCDMA, WiMAX, PCS, GSM, GPS, GPRS, TETRA
- IoT/ Broadcasting / WLAN – FM, DMB, DVB, ISM Functional Diagram RF IN GND 2,4 RF OUT / Bias 3 1) Stresses above the maximum values listed have may cause permanent damage to the device. 2) MTTF is more than 100 years.
http://www.prewell.com 2 Wideband Gain Block SJM PREWELL PG451 Productsand product information are subject to change without notice.Version 1.6 25℃ -40℃ 85℃ OIP3 (dBm) Frequency (GHz) OIP3 vs Frequency -1 0 1 2 3 4 5 6 7 8 9 OIP3 @ 900MHz OIP3 @ 1900MHz OIP3 @ 2140MHz OIP3 @ 2600MHz OIP3 (dBm) Output Power (dBm) OIP3 vs Output Power Parameters Units Frequency (MHz) 900 1500 1900 2140 2300 2600 Typical RF Performance for 1.9GHz Tuned Application Circuit Supply Bias Voltage = 4V, Current= 81mA 25℃ -40℃ 85℃ S21 (dB) Frequency (GHz) Gain vs Frequency -30 -24 -18 -12 25℃ -40℃ 85℃ S11 (dB) Frequency (GHz) Input Return Loss -25 -20 -15 -10 25℃ -40℃ 85℃ S22 (dB) Frequency (GHz) Output Return Loss RF IN RF OUT20pF 5pF 22nH 5pF 1uF 1.2pF Input Return Loss Output Return Loss Gain vs Frequency OIP3 vs. Frequency OIP3 vs. Output Power
http://www.prewell.com 3 Wideband Gain Block SJM PREWELL PG451 Productsand product information are subject to change without notice.Version 1.6 0 1 2 3 4 5 120 150 25℃ Id (mA) Vd (V) Id vs. Vd -1 2 5 8 11 14 -60 -55 -50 -45 -40 -35 25℃ -40℃ 85℃ ACLR (dBc) Output Channel Power (dBm) 25℃ -40℃ 85℃ P1dB (dBm) Frequency (GHz) P1dB vs Frequency 25℃ NF (dB) Frequency (GHz) NF vs. Frequency -20 -15 -10 -5 0 5 10 15 Gain Output Power Output power(dBm) / Gain (dB) Input Power (dBm) Output Power / Gain vs Input Power @ 0.9GHz -20 -15 -10 -5 0 5 10 15 Gain Output Power Output power(dBm) / Gain (dB) Input Power (dBm) Output Power / Gain vs Input Power @ 1.9GHz -20 -15 -10 -5 0 5 10 15 Gain Output Power Output power(dBm) / Gain (dB) Input Power (dBm) Output Power / Gain vs Input Power @ 2.6MHz -20 -15 -10 -5 0 5 10 15 Gain Output Power Output power(dBm) / Gain (dB) Input Power (dBm) Output Power / Gain vs Input Power @ 2.14GHz P1dB vs. Frequency NF vs. Frequency Output Power / Gain vs Input Power @ 900MHz Output Power / Gain vs Input Power @1900MHz Output Power / Gain vs Input Power @2140MHz Output Power / Gain vs Input Power @2600MHz Id vs. Vd ACLR vs. Channel Power @ 1850MHz 3GPP WCDMA 6FA, Test Model5 TM1+64DPCH, 5MHz offset
http://www.prewell.com 4 Wideband Gain Block SJM PREWELL PG451 Productsand product information are subject to change without notice.Version 1.6 0 3 6 9 12 15 -60 -55 -50 -45 -40 -35 25℃ -40℃ 85℃ ACLR (dBc) Output Channel Power (dBm) ACLR vs. Channel Power @ 2140MHz 3GPP WCDMA 6FA, Test Model5 TM1+64DPCH, 5MHz offset
http://www.prewell.com 5 Wideband Gain Block SJM PREWELL PG451 Productsand product information are subject to change without notice.Version 1.6 Evaluation Board Layout (40x40) Lead-free /RoHS Compliant / Green SOT-89 Package Outline Land Pattern Mounting Instructions 1 Use a large ground pad area with many plated through-holes as shown. 2 We recommend 1 ozcopper minimum. 3 Measurement for our data sheet was made on 0.8mm thick FR-4 Board. 4 RF trace width depends on the board material and construction. 5 Add mounting screws near the part to fasten the board to a heatsink. 6 Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. REF. DIMENSIONS (mm) Min. Max. A 1.40 1.60 B 0.43 0.58 B1 0.36 0.54 C 0.35 0.46 D 4.30 4.70 D1 1.50 1.87 E 2.29 2.70 E1 2.13 2.18 e 1.5 e1 3.0 H 3.43 5.10 L 0.74 1.20 Product Code Lot Number POOOO X X X X