PFDJ21FWX-B-U1 ETA-USA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
16170 Vineyard Blvd. Suite 180, Morgan Hill, CA 95037 Visit us at: www.e ta-usa.com Phone: 1-800-ETA-POWER, (408) 778-2793 Fax: (408) 779-2753 email at: sales@eta-usa.com PFDJ21FWX-B-U1 General Description “PF”-Series AC/DC Switching power supplies has been designed to meet harmonic current distortion. PF series has the 75 W PFC with the peak of 150 W, the 120W PFD with peak of 240W and 240 W PFE with peak of 480 W. They are suitable for motor drive. Output PFDJ21FWX-B-U1 Characteristic Unit V1 V2 Output Voltage Vdc 24 5 Output Current *6 A 4 / 14 5 Voltage Adjust Range V ± 10% of Rated Output Voltage(at no load within the input range) Ripple&Noise(max)*2 mVpp 250 150 Rise up time mS 1000mS(maximum) at [+24Vdc] 85Vac Hold up time mS 20mS(minimum) at [+24Vdc] 85Vac Regulation a.Line Regulation max. mV 120 25 b.Load Regulation max. mV 240 50 c. Temperature Coefficient *3 °C 0.03%/℃ d. Drift(maximum) *4 mV 135 40 e. Dynamic Load Regulation (typ.) *5 mV 720 150 f. Recovery Time *5 mS 1mS(typical) Efficiency *2 % 77% Typ.AC100 [V] / 80% Typ.AC230 [V] Power Factor 0.95 Typ. AC100 [V] / 0.89 Typ. AC230 [V] Application Features Motor drive Input Input Voltage: Input Voltage Range: Input Current: Frequency: Input Frequency Range: Phase: Inrush Current: *1 Leakage Current: AC100-230V AC85-264V 2.1-0.9 A 50/60Hz 47-63Hz Single 22A(max.) at AC100V 50A(max.) at AC230V 1mA(maximum)at 25 1. Chassis Mount 2. Frameless, Connector Type 3. Low Line Distortion 4. Pulse Load response 5. Designed for peak loads(Doubled for rate output) 6. Power factor correction 7. Harmonic current complies to: IEC 1000-3-2, EN6 1000-3-2 8. Universal input 85-264V 9. EMI desiegned to meet : FCC part 15-B Class B, EN 5502 Class B, VCCI Class B 10. CE-marked acc. To LVD 11. Cost Effective Options 1. Remote Control(add suffix “–R” or “–RR”) 2. Cover(add suffix “–P”) : * ”-P” model dimension of chassis mount model is the same as “Open Frame “ model 3. 40 cm long wire harness AACC//DDCC SSWWIITTCCHHIINNGG PPOOWWEERR SSUUPPPPLLYY AACC IINNPPUUTT 8855~~226644 DDUUAALL CCHHAANNNNEELL OOUUTTPPUUTT
112200 WWAATTTTSS
16170 Vineyard Blvd. Suite 180, Morgan Hill, CA 95037 Visit us at: www.e ta-usa.com Phone: 1-800-ETA-POWER, (408) 778-2793 Fax: (408) 779-2753 email at: sales@eta-usa.com Conditions: *1 at cold start *2 measured by a bayonet probe at the end of a pair of 15cm long wires terminated with a 47uF electrolytic capacitor *3 at -10 to +50℃ *4 for 7hour period after 1hour warm-up at 25℃ and rated input/output *5 when output current changed from 25% to 75% of rated output current rapidly at rated input *6 peak current is less than 10seconds Environmental Specification Operating Temperature -10 to +50C(without cover)/ -10 to +45C(enclosed type) Operating Humidity 20 to 85%/RH(non-condensing) Storage Temperature -20 to +85℃ Storage Humidity 10 to 85%/RH(non-condensing) Withstanding Voltage Primary-Secondary AC3,000V at 25mA for 1minute Primary-Frame Ground AC2,500V at 25mA for 1minute Secondary-Frame Ground AC500V at 50mA for 1minute Isolation Resistance Primary-Secondary-Frame Ground 50M ohm(minimum) by DC500V insulation tester Vibration 5-10Hz:10mm double amplitude,10-55Hz:19.6m/s2,20minutes' period for 60minutes each along X,Y,Z axes(non- operating) Shock 294m/s2 Cooling Convection Environmental Agencies Line Conducted Noise Built to meet FCC Part15-B Class B Built to meet VCCI Class B Built to meet EN55022 Class B Line Harmonic Distortion Built to meet IEC61000-3-2 Safety Built to UL: UL60950-1 2 nd edition Built to C-UL: CSA C22.2 No.60950 Built to VDE EN60950-1 2006 MTBF [H] 229000 Switching Frequency[kHz] 140fix (V1:+24V)/ 70fix (V2:+5V) Function/Protection Over current Protection automatic recovery Over voltage Protection output shutdown(to reset,leave 3minutes after shut-off) Remote Sense not available Remote On/Off not available Power Fail Detection not available Series Operation not available Parallel Operation not available Mechanical Dimension [mm] 95Wx200Lx57H Weight g 800g/enclosed type:900g