PF252HF-010.0M

PF150LF CONNOR-WINFIELD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Features

Description

Standard Frequencies: (Additional Frequencies are Available)

2111 Comprehensive Drive

Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation Model Specifications

ORDERING INFORMATION

PF151LF - 010.0 M OCXO SERIES CENTER FREQUENCY 0704 PF151LF 10.0MHZ OCXO - Fixed Frequency VCOCXO - Voltage Controlled Frequency Range: 6.4 to 40 MHz 3.3V or 5.0V Operation LVCMOS / HCMOS Output Logic PF Frequency Stabilities Available: Temperature Ranges Available: : 0 to 70°C Low Jitter <1pS RMS RoHS Compliant / Lead Free 15xxx / PF16xxx Series -14 Pin DIP Package PF25xxx / PF26xxx Series -Surface Mount Package PF150xx Series: ±0.05ppm PF151xx / PF161xx Series: ±0.10ppm PF251xx / PF261xx Series: ±0.10ppm PF152xx / PF162xx Series: ±0.15ppm PF252xx / PF262xx Series: ±0.15ppm PF153xx / PF163xx Series: ±0.20ppm PF253xx / PF263xx Series: ±0.20ppm PF154xx / PF164xx Series: ±0.25ppm PF254xx / PF264xx Series: ±0.25ppm PF15xxx PF16xxx: -40 to 85°C Tape and Reel Packaging OCXO – N/C VCOCXO - Voltage Control

7 Ground (Case)

8 Output

14 Vcc

PF15xxx / PF16xxx - Series 0704 PF251LF 12.8MHZ PF25xxx / PF26xxx - Series Bulletin Page Revision Date Cx123 2o f4

25 Jun 2008

US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Frequency Range 6.4 to 40 MHz Frequency Stability ±0.05ppm 1.2 Temperature Range 0 to 70°C Supply Voltage 3.3 Vdc 5.0 Vdc 3.3 Vdc 5.0 Vdc OCXO / VCOCXO OCXO OCXO VCOCXO VCOCXO Frequency Range 6.4 to 40 MHz Frequency Stability ±0.10ppm 1.2 Temperature Range 0 to 70°C Supply Voltage 3.3 Vdc 5.0 Vdc 3.3 Vdc 5.0 Vdc OCXO / VCOCXO OCXO OCXO VCOCXO VCOCXO Frequency Range 6.4 to 40 MHz Frequency Stability ±0.10ppm 1.2 Temperature Range -40 to 85°C Supply Voltage 3.3 Vdc 5.0 Vdc 3.3 Vdc 5.0 Vdc OCXO / VCOCXO OCXO OCXO VCOCXO VCOCXO Frequency Range 6.4 to 40 MHz Frequency Stability ±0.15ppm 1.2 Temperature Range 0 to 70°C Supply Voltage 3.3 Vdc 5.0 Vdc 3.3 Vdc 5.0 Vdc OCXO / VCOCXO OCXO OCXO VCOCXO VCOCXO Frequency Range 6.4 to 40 MHz 1.2 Frequency Stability ±0.15ppm Temperature Range -40 to 85°C Supply Voltage 3.3 Vdc 5.0 Vdc 3.3 Vdc 5.0 Vdc OCXO / VCOCXO OCXO OCXO VCOCXO VCOCXO Frequency Range 6.4 to 40 MHz 1.2 Frequency Stability ±0.20ppm Temperature Range 0 to 70°C Supply Voltage 3.3 Vdc 5.0 Vdc 3.3 Vdc 5.0 Vdc OCXO / VCOCXO OCXO OCXO VCOCXO VCOCXO Frequency Range 6.4 to 40 MHz 1.2 Frequency Stability ±0.20ppm Temperature Range -40 to 85°C Supply Voltage 3.3 Vdc 5.0 Vdc 3.3 Vdc 5.0 Vdc OCXO / VCOCXO OCXO OCXO VCOCXO VCOCXO Frequency Range 6.4 to 40 MHz 1.2 Frequency Stability ±0.25ppm Temperature Range 0 to 70°C Supply Voltage 3.3 Vdc 5.0 Vdc 3.3 Vdc 5.0 Vdc OCXO / VCOCXO OCXO OCXO VCOCXO VCOCXO Frequency Range 6.4 to 40 MHz 1.2 Frequency Stability ±0.25ppm Temperature Range -40 to 85°C Supply Voltage 3.3 Vdc 5.0 Vdc 3.3 Vdc 5.0 Vdc OCXO / VCOCXO OCXO OCXO VCOCXO VCOCXO Note: 1.2) Frequency stability vs. change in temperature.

Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation 3.3V LVCMOS Model Specifications 5.0V HCMOS Model Specifications Notes: 1.3) Initial calibration @ 25C. VCOCXO model Vc = 1.50 Vdc. 2.3) Frequency stability vs. Change in temperature, referenced to 25C. 3.3) Frequency stability per 5% change in supply voltage. 4.3) At the time of shipment after 48 hours of operation. 5.3) Inclusive of calibration, operating temperature range, supply voltage change, shock and vibration 20 years aging, VCOCXO models Vc=1.5V. 6.3) Typical phase noise, results will vary depending on center frequency. The phase noise shown are typical for 20 MHz. 7.3) Measured @ 25C, within 5 minutes, the unit will be within +/-0.1ppm of its reference frequency, measured after 30 minutes of continuous operation at a stable 25C. 8.3) VCOCXO models pullability referenced to Fo @ 25°C, Positive Transfer Characteristic. Bulletin Page Revision Date Cx123 3o f4 US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Notes: 9.3) Initial calibration @ 25C. VCOCXO model Vc = 2.0 Vdc. 10.3) Frequency stability vs. Change in temperature, referenced to 25C. 11.3) Frequency stability per 5% change in supply voltage. 12.3) At the time of shipment after 48 hours of operation. 13.3) Inclusive of calibration, operating temperature range, supply voltage change, shock and vibration 20 years aging, VCOCXO models Vc=2.0V. 14.3) Typical phase noise, results will vary depending on center frequency. The phase noise shown are typical for 20 MHz. 15.3) Measured @ 25C, within 5 minutes, the unit will be within +/-0.1ppm of its reference frequency, measured after 30 minutes of continuous operation at a stable 25C. 16.3) VCOCXO models pullability referenced to Fo @ 25°C, Positive Transfer Characteristic. ABSOLUTE MAXIMUM RATINGS TABLE 1.3 PARAMETER UNITS MINIMUM NOMINAL MAXIMUM UNITS NOTE Storage Temperature -55 - 125 °C Supply Voltage (Vcc) -0.5 - 4.5 Vdc Control Voltage (Vc) -0.5 - 4.5 Vdc OPERATING SPECIFICATIONS TABLE 2.3 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE Frequency Calibration -1.0 1.0 ppm 1.3, 4.3 Frequency Stability See Page 2 ppm 2.3 Frequency vs. Change in Supply Voltage -0.05 - 0.05 ppm 3.3 Aging (Daily) -30 - 30 ppb 4.3 Aging (1st year) -1.0 - 1.0 ppm Total Frequency Tolerance (20 years) -4.6 - 4.6 ppm 5.3 Supply Voltage (Vcc) 3.13 3.3 3.47 Vdc Supply Power (0 to 70°C) - - 1.5 Watts Supply Power (-40 to 85°C) - - 2.7 Watts Phase Jitter (BW =10Hz to Fo/2) - - 3 pS RMS Phase Jitter (BW =10KHz to Fo/2) - - 1 pS RMS Period Jitter - - 1 pS RMS Allan Variance (1 Second) - 1.00 E-10 - SSB Phase Noise at 10Hz offset - -90 - dBc/Hz 6.3 SSB Phase Noise at 100Hz offset - -120 - dBc/Hz 6.3 SSB Phase Noise at 1KHz offset - -140 - dBc/Hz 6.3 SSB Phase Noise at 10KHz offset - -150 - dBc/Hz 6.3 Start-Up Time: Oscillator - - 35 ms Warm Up Time - - 5 Minutes 7.3 VCOCXO CHARACTERISTICS TABLE 3.3 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE Control Voltage Range (Vc) 0.3 1.5 3.0 Vdc Frequency at Vc=0.3 Vdc - -7 -5 ppm 8.3 Frequency at Vc=3.0 Vdc 5 7 - ppm 8.3 Slope of Frequency Adjust 3.7 - - ppm/V Input Impedance 100k - - Ohm LVCMOS OUTPUT CHARACTERISTICS TABLE 4.3 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE LOAD - 15 - pF Voltage (High) (Voh) 2.6 - - Vdc (Low) (Vol) - - 0.4 Vdc Current (High) (Ioh) -4 - - mA (Low) (Iol) - - 4 mA Duty Cycle at 50% of Vcc 45 50 55 % Rise / Fall Time 10% to 90% - - 6 nS PACKAGE CHARACTERISTICS TABLE 5.3 PF1xxxx-Series DIP Package 14 pin DIP, hermetically sealed, grounded, welded package. PF2xxxx-Series Surface Mount Package Surface Mount, Non-hermetic package consisting of an FR4 substrate with grounded metal cover. ABSOLUTE MAXIMUM RATINGS TABLE 6.3 PARAMETER UNITS MINIMUM NOMINAL MAXIMUM UNITS NOTE Storage Temperature -55 - 125 °C Supply Voltage (Vcc) -0.5 - 4.5 Vdc Control Voltage (Vc) -0.5 - 4.5 Vdc OPERATING SPECIFICATIONS TABLE 7.3 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE Frequency Calibration -1.0 1.0 ppm 9.3, 12.3 Frequency Stability See Page 2 ppm 10.3 Frequency vs. Change in Supply Voltage -0.05 - 0.05 ppm 11.3 Aging (Daily) -30 - 30 ppb 123 Aging (1st year) -1.0 - 1.0 ppm Total Frequency Tolerance (20 years) -4.6 - 4.6 ppm 13.3 Supply Voltage (Vcc) 4.75 5.0 5.25 Vdc Supply Power (0 to 70°C) - - 1.5 Watts Supply Power (-40 to 85°C) - - 2.7 Watts Phase Jitter (BW =10Hz to Fo/2) - - 3 pS RMS Phase Jitter (BW =10KHz to Fo/2) - - 1 pS RMS Period Jitter - - 1 pS RMS Allan Variance (1 Second) - 1.00 E-10 - SSB Phase Noise at 10Hz offset - -90 - dBc/Hz 14.3 SSB Phase Noise at 100Hz offset - -120 - dBc/Hz 14.3 SSB Phase Noise at 1KHz offset - -140 - dBc/Hz 14.3 SSB Phase Noise at 10KHz offset - -150 - dBc/Hz 14.3 Start-Up Time: Oscillator - - 35 ms Warm Up Time - - 5 Minutes 15.3 VCOCXO CHARACTERISTICS TABLE 8.3 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE Control Voltage Range (Vc) 0.5 2.0 4.1 Vdc Frequency at Vc=0.5 Vdc - -7 -5 ppm 16.3 Frequency at Vc=4.1 Vdc 5 7 - ppm 16.3 Slope of Frequency Adjust 3.7 - - ppm/V Input Impedance 100k - - Ohm HCMOS OUTPUT CHARACTERISTICS TABLE 9.3 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE LOAD - 15 - pF Voltage (High) (Voh) Vcc-0.5 - - Vdc (Low) (Vol) - - 0.4 Vdc Current (High) (Ioh) -4 - - mA (Low) (Iol) - - 4 mA Duty Cycle at 50% of Vcc 45 50 55 % Rise / Fall Time 10% to 90% - - 6 nS PACKAGE CHARACTERISTICS TABLE 10.3 PF1xxxx-Series DIP Package 14 pin DIP, hermetically sealed, grounded, welded package. PF2xxxx-Series Surface Mount Package Surface Mount, Non-hermetic package consisting of an FR4 substrate with grounded metal cover.

Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation .830 (21.08mm) .565 (14.35mm) 1 7 814 OCXO - N/C VCOCXO - VC 15 pF Suggested Pad Layout Surface Mount Package Outline

14 Pin DIP Package Outline

14 Pin DIP Package

Environmental Characteristics ENVIRONMENTAL CHARACTERISTICS Temperature Cycle: Per MIL-STD-883, Method 1010, Condition B. -55°C to 125°C, 300 cycles, 10 minute dwell, 1minute transition. MECHANICAL CHARACTERISTICS Vibration: Per MIL-STD-202, Method 204, Condition A. 10G’s peak, 10Hz to 500Hz, 15 minute cycles 12 times each perpendicular axis. Shock: Per MIL-STD-202, Method 213, Condition F. 1500G’s, 0.5ms, half sine, 3 shocks per direction. Moisture Resistance: Per MIL-STD-202, Method 106. 95% RH @ 65°C, 10 cycles 10°C to 65°C. Surface Mount Package Environmental Characteristics ENVIRONMENTAL CHARACTERISTICS Temperature Cycle: Per MIL-STD-883, Method 1010, Condition B. -55°C to 125°C, 300 cycles, 10 minute dwell, 1minute transition. G r o s sL e a kT e s t :Per MIL-STD-202, Method 112, Condition D. No Bubbles in flourinert (FC-43) at 125°C ±5°C for 20 seconds. SOLDERING Pin Solderability: Per MIL-STD-883, Method 2003. 8 hour steam age prior to 254°C ±5°C Solder pot dip, 95% Coverage. Resistance to Solder Heat: Per MIL-STD-202, Method 210, Condition C. Wave: Topside board- mount product, 260°C ±5°C for 20 seconds. MECHANICAL CHARACTERISTICS Vibration: Per MIL-STD-202, Method 204, Condition A. 10G’s peak, 10Hz to 500Hz, 15 minute cycles 12 times each perpendicular axis. Shock: Per MIL-STD-202, Method 213, Condition F. 1500G’s, 0.5ms, half sine, 3 shocks per direction. Moisture Resistance: Per MIL-STD-202, Method 106. 95% RH @ 65°C, 10 cycles 10°C to 65°C. CW 0704 PF151LF

10.0 MHZ

Dimensional Tolerance: ±.005 (.127mm) ±.02 (.508mm) CW 0704PF251LF12.8MHZCW 0704 PF251LF12.8MHZ .330 max (8.382mm) .330 max (8.382mm) 90% 50% 10% Output Waveform Tape and Reel Information Solder Profile US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Bulletin Page Revision Date Cx123 4o f4 OCXO – N/C VCOCXO - Voltage Control 7G r o u n d ( C a s e )