PET3-2405Z41LF

PET3-243R3E41LF PEAK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

PMJ-Series – PET3-xxxxE/Z4:1(H35)(M)LF – Single and Dual Output – DIP24 – Plastic/Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/3 PET3-xxxxE/Z4:1(H35)(M)LF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range 4:1 Wide Input Input Filter Pi Type Input Reflected Ripple Current¹ 35 mA pk-pk Output Specifications Voltage Accuracy ± 1% Short Circuit Protection Indefinite (automatic recovery) Line Regulation ± 0.5% Load Regulation ± 0.5% / ± 1.5% (only 3.3 / ±3.3 Vout Models) Ripple and Noise (20Mhz bandwidth) 60 mV pk-pk Temperature Coefficient ± 0.02% / ° C General Specifications Efficiency See Table I/O Isolation Voltage (3 sec.) 1500 VDC (3500 VDC optional)* I/O Isolation Capacity 470 pF, typ. I/O Isolation Resistance 1000 MOhm Switching Frequency (typical) 266 kHz, typ. Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 1.121 Mhrs Physical Specifications Case Material Non Conductive Black Plastic Nickel Coated Copper Potting Material Epoxy (UL94V-0 rated) Weight ~ 13.5g, typ. (~ 17g metal case) Environment Specifications Operating Temperature -40 to +85° C (ambient) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection RoHS Conform Soldering 260° C, max. (1.5mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The P M J series P ET3 -xxxxE/Z 4:1(H3 5)LF is a family of cost effective 3W single & dual output DC-DC converters with an ultra wide input Voltage of 4:1. These converters are encapsulated in an ultra miniature DIP24 plastic or metal case. High performance features: 1500VDC u p to 3500VDC input/output isolation, high efficiency operation, output voltage accuracy of ±1% maximum, wide input range 2:1 and low output ri pple and noise. PMJ-SERIES /checkbld 3 Watt /checkbld 4:1 Wide Input /checkbld Regulated /checkbld DIP24 Plastic (Metal)** Case /checkbld 1.5 or 3.5 KV DC I/O Isolation /checkbld SINGLE and DUAL Output /checkbld Continuous Short Circuit Prot. Rev.07-2010

PMJ-Series – PET3-xxxxE/Z4:1(H35)(M)LF – Single and Dual Output – DIP24 – Plastic/Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/3 Selection Guide Single/Dual Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t M in . L o a d (m A ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² SINGLE OUTPUT PET3-243R3E4:1LF 9-36 16 165 3.3 0 900 75 680 PET3-2405E4:1LF 9-36 16 160.3 5 0 600 78 470 PET3-2409E4:1LF 9-36 16 156.3 9 0 333 80 100 PET3-2412E4:1LF 9-36 16 156.3 12 0 250 80 68 PET3-2415E4:1LF 9-36 16 156.3 15 0 200 80 47 PET3-2424E4:1LF 9-36 16 156.3 24 0 125 80 22 PET3-483R3E4:1LF 18-72 14 82.5 3.3 0 900 75 680 PET3-4805E4:1LF 18-72 14 80.1 5 0 600 78 470 PET3-4809E4:1LF 18-72 14 78.1 9 0 333 80 100 PET3-4812E4:1LF 18-72 14 78.1 12 0 250 80 68 PET3-4815E4:1LF 18-72 14 78.1 15 0 200 80 47 PET3-4824E4:1LF 18-72 14 78.1 24 0 125 80 22 DUAL OUTPUT PET3-243R3Z4:1LF 9-36 16 165 ± 3.3 0 ± 454 75 ± 330 PET3-2405Z4:1LF 9-36 16 160.3 ± 5 0 ± 300 78 ± 220 PET3-2409Z4:1LF 9-36 16 156.3 ± 9 0 ± 166 80 ± 47 PET3-2412Z4:1LF 9-36 16 156.3 ± 12 0 ± 125 80 ± 33 PET3-2415Z4:1LF 9-36 16 156.3 ± 15 0 ± 100 80 ± 22 PET3-2424Z4:1LF 9-36 16 156.3 ± 24 0 ± 63 80 ± 10 PET3-483R3Z4:1LF 18-72 14 83.3 ± 3.3 0 ± 454 75 ± 330 PET3-4805Z4:1LF 18-72 14 80.1 ± 5 0 ± 300 78 ± 220 PET3-4809Z4:1LF 18-72 14 78.1 ± 9 0 ± 166 80 ± 47 PET3-4812Z4:1LF 18-72 14 78.1 ± 12 0 ± 125 80 ± 33 PET3-4815Z4:1LF 18-72 14 78.1 ± 15 0 ± 100 80 ± 22 PET3-4824Z4:1LF 18-72 14 78.1 ± 24 0 ± 63 80 ± 10 If you need other specifications, please enquire. * For optional 3.5kV DC I/O Isolation, please add “ H35” before (M)LF! /barb2right Example: PET3-1205Z2:1 H35 LF for 3.5kV ** For optional metal case, please add “M” before L F! /barb2right Example: PET3-1205Z2:1H35 MLF for metal case

PMJ-Series – PET3-xxxxE/Z4:1(H35)(M)LF – Single and Dual Output – DIP24 – Plastic/Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/3 Package / Pinning / Derating Standart Plastic Case Optional Metal Case** # SINGLE DUAL 1 +Vin +Vin 2 +Vin +Vin 10 N.C. Common 11 N.C. Common 12 - Vout N.C. 13 +Vout - Vout 15 N.C. +Vout 23 - Vin - Vin 24 - Vin - Vin others same Pinning for 3.5 kV Omitted PIN CONNECTIONS App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Tested by nominal Vin and constant resistive load.