PESDXS5UD_SER NEXPERIA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 13
Technical content
1.1 General description
from the damage caused by ESD and other transients.
1.2 Features
1.3 Applications
1.4 Quick reference data
Table 1. Quick reference data
Table 2. Pinning Table 3. Ordering information Table 4. Marking codes
[1] Non-repetitive current pulse 8/20µs exponential decay waveform according to IEC 61000-4-5. [1] Device stressed with ten non-repetitive ESD pulses. Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Table 6. ESD maximum ratings Table 7. ESD standards compliance
Table 8. Characteristics Tamb =2 5°C unless otherwise specified.
[1] Non-repetitive current pulse 8/20µs exponential decay waveform according to IEC 61000-4-5. Table 8. Characteristics …continued Tamb =2 5°C unless otherwise specified.
PESDXS5UD_SER_2 Product data sheet Rev. 02 — 7 December 2006 6 of 13 Nexperia PESDxS5UD series Fivefold ESD protection diode arrays f = 1 MHz; Tamb =2 5°C (1) PESD3V3S5UD (2) PESD5V0S5UD f = 1 MHz; Tamb =2 5°C (1) PESD12VS5UD (2) PESD15VS5UD (3) PESD24VS5UD Fig 5. Diode capacitance as a function of reverse voltage; typical values Fig 6. Diode capacitance as a function of reverse voltage; typical values PESD3V3S5UD; PESD5V0S5UD I R is less than 5 nA at 150°C for: PESD12VS5UD; PESD15VS5UD; PESD24VS5UD Fig 7. Relative variation of reverse leakage current as a function of junction temperature; typical values Fig 8. V-I characteristics for a unidirectional ESD protection diode VR (V) 05 4231 006aaa700 140 100 180 220 C d (pF) (1) (2) VR (V) 02 5 2010 155 006aaa701 C d (pF) (1) (2) (3) 006aaa699 10−1 Tj (°C) −100 15010005 0−50 IRM IRM(25° C) 006aaa407 −V CL −V BR −V RWM −IRM −IR −IPP V I P-N − + © Nexperia B.V. 2017. All rights reserved
PESDXS5UD_SER_2 Product data sheet Rev. 02 — 7 December 2006 7 of 13 Nexperia PESDxS5UD series Fivefold ESD protection diode arrays Fig 9. ESD clamping test setup and waveforms 006aaa702 50 W R d C s DUT (DEVICE UNDER TEST) GND GND 450 W RG 223/U
50 W coax
C s = 150 pF; Rd = 330 W
4 GHz DIGITAL
10· ATTENUATOR GND GND GND GND GND GND PESD3V3S5UD PESD5V0S5UD PESD12VS5UD PESD15VS5UD PESD24VS5UD unclamped +1 kV ESD voltage waveform (IEC 61000-4-2 network) clamped +1 kV ESD voltage waveform (IEC 61000-4-2 network) unclamped -1 kV ESD voltage waveform (IEC 61000-4-2 network) clamped -1 kV ESD voltage waveform (IEC 61000-4-2 network) vertical scale = 200 V/div horizontal scale = 50 ns/div vertical scale = 20 V/div horizontal scale = 50 ns/div vertical scale = 200 V/div horizontal scale = 50 ns/div vertical scale = 10 V/div horizontal scale = 50 ns/div © Nexperia B.V. 2017. All rights reserved
PESDXS5UD_SER_2 Product data sheet Rev. 02 — 7 December 2006 8 of 13 Nexperia PESDxS5UD series Fivefold ESD protection diode arrays 7. Application information The PESDxS5UD series is designed for the protection of up to five unidirectional data lines from the damage caused by ESD and surge pulses. The PESDxS5UD series may be used on lines where the signal polarities are both, positive and negative with respect to ground. The PESDxS5UD series provides a surge capability of 200 W per line for an 8/20µs waveform. Circuit board layout and protection device placement Circuit board layout is critical for the suppression of ESD, Electrical Fast Transient (EFT) and surge transients. The following guidelines are recommended: 1. Place the PESDxS5UD as close to the input terminal or connector as possible. 2. The path length between the PESDxS5UD and the protected line should be minimized. 3. Keep parallel signal paths to a minimum. 4. Avoid running protected conductors in parallel with unprotected conductors. 5. Minimize all Printed-Circuit Board (PCB) conductive loops including power and ground loops. 6. Minimize the length of the transient return path to ground. 7. Avoid using shared transient return paths to a common ground point. 8. Ground planes should be used whenever possible. For multilayer PCBs, use ground vias. Fig 10. Application diagram 006aaa019 PESDxS5UD high-speed data lines unidirectional protection of 5 lines PESDxS5UD bidirectional protection of 4 lines © Nexperia B.V. 2017. All rights reserved
[1] For further information and the availability of packing methods, seeSection13. Table 9. Packing methods
PESDXS5UD_SER_2 Product data sheet Rev. 02 — 7 December 2006 10 of 13 Nexperia PESDxS5UD series Fivefold ESD protection diode arrays 10. Soldering Dimensions in mm Fig 12. Reflow soldering footprint SOT457 (SC-74) Dimensions in mm Fig 13. Wave soldering footprint SOT457 (SC-74) solder lands solder resist occupied area solder paste 0.95 2.825 0.45 0.55 1.60 1.95 3.45 1.70 3.10 3.20 3.30 msc422 1.40 4.30 5.30 0.45 msc423 1.45 4.455.05 solder lands solder resist occupied area © Nexperia B.V. 2017. All rights reserved
Table 10. Revision history guidelines of NXP Semiconductors.
- Legal texts have been adapted to the new company name where appropriate.
- Table 2 “Pinning”: symbol drawing amended
- Table 5 “Limiting values”: amended
- Table 6 “ESD maximum ratings”: amended
- Table 7 “ESD standards compliance”: amended
- Table 8 “Characteristics”: VBR minimum and maximum values for PESD15VS5UD adapted
- Figure7: figure notes adapted
- Section 10 “Soldering”: added PESDXS5UD_SER_1 20060404 Product data sheet - - © Nexperia B.V. 2017. All rights reserved
PESDXS5UD_SER_2 Product data sheet Rev. 02 — 7 December 2006 12 of 13 Nexperia PESDxS5UD series Fivefold ESD protection diode arrays 12. Legal information
12.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nexperia.com.
12.2 Definitions
Draft —The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet —A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Nexperia sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail.
12.3 Disclaimers
General — Information in this document is believed to be accurate and reliable.However,Nexperiadoesnotgiveanyrepresentationsor warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes —Nexperiareservestherighttomake changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use —Nexperia products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunctionofaNexperiaproductcanreasonably beexpectedto result in personal injury, death or severe property or environmental damage. Nexperia accepts no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications —Applications that are described herein for any of these products are for illustrative purposes only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values —Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale —Nexperia products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nexperia.com/profile/terms, including those pertaining to warranty, intellectual proper ty rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by Nexperia. In case of an y inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license —Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights.
12.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 13. Contact information For additional information, please visit:http://www.nexperia.com F or sales office addresses, send an email to:salesaddresses@nexperia.com Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. © Nexperia B.V. 2017. All rights reserved
Fivefold ESD protection diode arrays 14. Contents © Nexperia B.V. 2017. All rights reserved For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: