FLOWMETER PERMCO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Features
- Flows 0.5 - 54 GPM or 2 - 200 LPM
- Smooth pressure control up to 6000 PSI or 420 bar
- Built in thermometer
- Flow Accuracy within 4% FSD
- Large clear easy to read dials
- Allows for reverse flow
- Safe to use with “INTERPASS” ™ internal safety protection system. Protects system and operator against accidental over-pressure in both flow directions.
Permco USA | 1500 Frost Road | P. O. Box 2068 | Streetsboro, Ohio 44241 Copyright © 2015 © Bulletin # PFLOW-2.21 Version 1.7 Accessories Specifications www.permco.com Our Online Support is available 24/7/365 for your needs! Email: support@permco.com Call: (800) 626.2801 Model # Calibrated Flow Range US GPM Inlet Fitting Outlet Fitting PERM030-S-6 0.5 - 8 1-1/16” - 12UN JIC Male 1-1/16” - 12UN JIC Male PERM060-S-6 1 -16 1-1/16” - 12UN JIC Male 1-1/16” - 12UN JIC Male PERM120-S-6 4 - 32 1-5/16” - 12UN JIC Male 1-5/16” - 12UN JIC Male PERM200-S-6 4 - 54 1-5/16” - 12UN JIC Male 1-5/16” - 12UN JIC Male PERM030-B-6 0.5 - 8 3/4” BSPP 3/4” BSPP PERM060-B-6 1-16 3/4” BSPP 3/4” BSPP PERM120-B-6 4 - 32 1” BSPP 1” BSPP PERM200-B-6 4 - 54 1” BSPP 1” BSPP Operation Functional Specifications Ambient temperature: -10 to 50 °C (14 - 122 °F) Fluid type: Hydraulic oils Fluid temperature: 20 to 80 °C (68 - 176 °F) continuous use. Intermittently (< 10 minutes) up to 110 °C (230 °F). Maximum pressure: 420 Bar (6000 psi) Displays: Pressure and flow 2.5” (63mm) dials Temperature 2” (50mm) long scale 20 to120 °C (68 - 248 °F) Accuracy: Flow: ± 4% of full scale Pressure: ± 1.6% of full scale Temperature: ± 2.5 °C (± 5 °F) Dimensions: 310 x 105 x 120 mm (12-1/4” x 4-1/8” x 4-7/8”) Weight: 6.6 kg (14.5 lbs) Construction material case: Painted steel - removable lid RFI body: Aluminium 2011T6 Load valve body: Aluminium 2011T6 Internal components: Stainless steel, brass Seals: Viton There are two main elements to the flow meter - the reverse flow indicator (RFI) and the load valve. The flow indicator block houses a metering piston which moves against a calibrated spring. The piston is magnetically coupled to a rotary pointer to provide a direct reading of flow on the dial, flow scale is displayed in both lpm and US gpm. The thermometer is also mounted in the flow block near the fluid flow. Both flow and temperature scales are shielded behind impact resistant windows. The load valve is connected directly to the flow block and a 420 bar (6000 psi) pressure gauge is mounted in the inlet section of the loading valve. The valve is easy to operate and, combined with the pressure gauge, allows sensitive and progressive control of system pressure throughout the working range. Reverse flow The tester will allow reverse flow but will not measure the reverse flow, i.e. the flow needle will indicate zero. Safety Discs Protection against over pressure is provided by two internal safety discs which relieve at 440 bar (6400 psi) without external spillage. The safety discs are housed in a cartridge and are easily replaceable. Each unit is supplied with four spare discs. Calibration All testers are calibrated with 28cSt oil as standard. Calibration certificates are available on request - this is a chargeable option. Other calibration on request - please consult factory. Installation It is recommended to connect with flexible hoses of at least 500mm (1.5’) in length. Permco is a leading manufacturer of high-pressure hydraulic gear/vane pumps and motors, flow dividers, intensifiers, and accessories. Available in a wide variety of sizes and configurations to suit your application needs. Highlighted unit is normally stocked