PEN5_14 PEAK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

PEN-Series – PEN5-xxxxE/Z2:1LF – Single and Dual Ou tput – DIP24 - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/3 PEN5-xxxxE/Z2:1LF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range 2:1 Wide Input Input Filter Pi Type Input Reflected Ripple Current¹ 35 mA pk-pk Output Specifications Voltage Accuracy ± 1% Short Circuit Protection Indefinite (automatic recovery) Line Regulation ± 0.5% Load Regulation ± 0.5% / ± 1.5% (only 3.3 / ±3.3 Vout Models) Ripple and Noise (20Mhz bandwidth) 60 mV pk-pk Temperature Coefficient ± 0.02% / ° C General Specifications Efficiency See Table I/O Isolation Voltage (3 sec.) 1500 VDC I/O Isolation Capacity 470 pF, typ. I/O Isolation Resistance 1000 MOhm Switching Frequency (typical) 266 kHz, typ. Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 1.121 Mhrs Physical Specifications Case Material Nickel Coated Copper Potting Material Epoxy (UL94V-0 rated) Weight ~ 17g, typ. Environment Specifications Operating Temperature -40 to +85° C (ambient) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection (10mm distance required) RoHS Conform Soldering 260° C, max. (1.5mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de PEN-SERIES /checkbld 4-6 Watt /checkbld 2:1 Wide Input /checkbld Reg. Single and Dual Output /checkbld DIP24 Metal Case /checkbld 1.5 kV DC I/O Isolation /checkbld Continuous Short Circuit Prot. Rev.09-2009

PEN-Series – PEN5-xxxxE/Z2:1LF – Single and Dual Ou tput – DIP24 - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/3 Selection Guide Single/Dual Output Order # W a tt In p u t V o lta g e (V D C ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t M in . L o a d (m A ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² SINGLE OUTPUT PEN5-123R3E2:1LF 4 9 - 18 3.3 0 1200 77 3300 PEN5-1205E2:1LF 5 9 - 18 5 0 1000 81 1000 PEN5-1212E2:1LF 6 9 - 18 12 0 500 84 330 PEN5-1215E2:1LF 6 9 - 18 15 0 400 84 220 PEN5-243R3E2:1LF 4 18 - 36 3.3 0 1200 79 3300 PEN5-2405E2:1LF 5 18 - 36 5 0 1000 83 1000 PEN5-2412E2:1LF 6 18 - 36 12 0 500 86 330 PEN5-2415E2:1LF 6 18 - 36 15 0 400 86 220 PEN5-483R3E2:1LF 4 36 - 72 3.3 0 1200 79 3300 PEN5-4805E2:1LF 5 36 - 72 5 0 1000 83 1000 PEN5-4812E2:1LF 6 36 - 72 12 0 500 86 330 PEN5-4815E2:1LF 6 36 - 72 15 0 400 86 220 DUAL OUTPUT PEN5-1205Z2:1LF 5 9 - 18 ± 5 0 ± 500 81 ± 330 PEN5-1212Z2:1LF 6 9 - 18 ± 12 0 ± 250 84 ± 100 PEN5-1215Z2:1LF 6 9 - 18 ± 15 0 ± 200 84 ± 47 PEN5-2405Z2:1LF 5 18 - 36 ± 5 0 ± 500 83 ± 330 PEN5-2412Z2:1LF 6 18 - 36 ± 12 0 ± 250 86 ± 100 PEN5-2415Z2:1LF 6 18 - 36 ± 15 0 ± 200 86 ± 47 PEN5-4805Z2:1LF 5 36 - 72 ± 5 0 ± 500 83 ± 330 PEN5-4812Z2:1LF 6 36 - 72 ± 12 0 ± 250 86 ± 100 PEN5-4815Z2:1LF 6 36 - 72 ± 15 0 ± 200 86 ± 47 If you need other specifications, please enquire.

PEN-Series – PEN5-xxxxE/Z2:1LF – Single and Dual Ou tput – DIP24 - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/3 Package / Pinning / Derating Bottom View 1 12 13 24 27.94 (1.10) 2.54 (0.10) PE AK Modelcode Datecode 31.75 (1.25) 10.16 (0.40) 3.05 (0.12) All dimensions are typical in millimeters (inches). - Pin diameter: 0.5 +/-0.05 (0.02 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Standard Drawing For exact pinning please see connection table! Specification may change without notice. DIP24 – METAL CASE 2.00 (0.08) # SINGLE DUAL 2 - Vin - Vin 3 - Vin - Vin

9 Omitted Common

11 N.C. - Vout 14 +Vout +Vout 16 - Vout Common 22 +Vin +Vin 23 +Vin +Vin others Omitted Omitted PIN CONNECTIONS App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Test by nominal input voltage and constant resistor load.