PEN3_14 PEAK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

PEN-Series – PEN3-xxxxE/Z2:1LF – Single and Dual Ou tput – DIP24 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/3 PEN3-xxxxE/Z2:1LF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range 2:1 Wide Input Input Filter Pi Type Input Reflected Ripple Current¹ 35 mA pk-pk Output Specifications Voltage Accuracy ± 1% Short Circuit Protection Indefinite (automatic recovery) Line Regulation ± 0.5% Load Regulation ± 0.5% / ± 1.5% (only 3.3 / ±3.3 Vout Models) Ripple and Noise (20Mhz bandwidth) 60 mV pk-pk Temperature Coefficient ± 0.02% / ° C General Specifications Efficiency See Table I/O Isolation Voltage (3 sec.) 1500 VDC I/O Isolation Capacity 470 pF, typ. I/O Isolation Resistance 1000 MOhm Switching Frequency (typical) 266 kHz, typ. Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 1.121 Mhrs Physical Specifications Case / Base Material Non-conductive Black Plastic (UL94V-0 rated) Pin Material Brass Solder-coated (0.5mm) Potting Material Epoxy (UL94V-0 rated) Weight ~ 13.5g, typ. Environment Specifications Operating Temperature -40 to +85° C (ambient) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection (10mm distance required) RoHS Conform Soldering 260° C, max. (1.5mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de PEN-SERIES /checkbld 2-3 Watt /checkbld 2:1 Wide Input /checkbld Reg. Single and Dual Output /checkbld DIP24 Plastic Case /checkbld 1.5 kV DC I/O Isolation /checkbld Continuous Short Circuit Prot. Rev.09-2009

PEN-Series – PEN3-xxxxE/Z2:1LF – Single and Dual Ou tput – DIP24 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/3 Selection Guide Single/Dual Output Order # W a tt In p u t V o lta g e (V D C ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t M in . L o a d (m A ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² SINGLE OUTPUT PEN3-123R3E2:1LF 2 9 - 18 3.3 0 600 74 680 PEN3-1205E2:1LF 2.5 9 - 18 5 0 500 78 470 PEN3-1212E2:1LF 3 9 - 18 12 0 250 82 47 PEN3-1215E2:1LF 3 9 - 18 15 0 200 82 47 PEN3-243R3E2:1LF 2 18 - 36 3.3 0 600 76 680 PEN3-2405E2:1LF 2.5 18 - 36 5 0 500 79 330 PEN3-2412E2:1LF 3 18 - 36 12 0 250 84 47 PEN3-2415E2:1LF 3 18 - 36 15 0 200 84 47 PEN3-483R3E2:1LF 2 36 - 72 3.3 0 600 76 680 PEN3-4805E2:1LF 2.5 36 - 72 5 0 500 79 330 PEN3-4812E2:1LF 3 36 - 72 12 0 250 84 47 PEN3-4815E2:1LF 3 36 - 72 15 0 200 84 47 DUAL OUTPUT PEN3-1205Z2:1LF 2.5 9 - 18 ± 5 0 ± 250 77 ± 220 PEN3-1212Z2:1LF 3 9 - 18 ± 12 0 ± 125 80 ± 22 PEN3-1215Z2:1LF 3 9 - 18 ± 15 0 ± 100 80 ± 22 PEN3-2405Z2:1LF 2.5 18 - 36 ± 5 0 ± 250 79 ± 220 PEN3-2412Z2:1LF 3 18 - 36 ± 12 0 ± 125 82 ± 22 PEN3-2415Z2:1LF 3 18 - 36 ± 15 0 ± 100 82 ± 22 PEN3-4805Z2:1LF 2.5 36 - 72 ± 5 0 ± 250 80 ± 330 PEN3-4812Z2:1LF 3 36 - 72 ± 12 0 ± 125 84 ± 22 PEN3-4815Z2:1LF 3 36 - 72 ± 15 0 ± 100 84 ± 22 If you need other specifications, please enquire.

PEN-Series – PEN3-xxxxE/Z2:1LF – Single and Dual Ou tput – DIP24 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/3 Package / Pinning / Derating 15.24 (0.60) 20.32 (0.80) 0.25 (0.01) # SINGLE DUAL 2 - Vin - Vin 3 - Vin - Vin

9 Omitted Common

11 N.C. - Vout 14 +Vout +Vout 16 - Vout Common 22 +Vin +Vin 23 +Vin +Vin others Omitted Omitted PIN CONNECTIONS App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Test by nominal input voltage and constant resistor load.