PECO2-x-1224Z21LF

PECO2_14 PEAK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

PECO-Series – PECO2-x-xxxxE/Z2:1(H35)(M)LF – Single /Dual Output – DIP24 – Plastic/Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/4 PECO2-x-xxxxE/Z2:1(H35)(M)LF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range 2:1 Wide Input Input Filter Pi Type Input Reflected Ripple Current¹ 35 mA pk-pk Output Specifications Voltage Accuracy ± 1% Short Circuit Protection Continuous (automatic recovery) Line Regulation ± 0.5% Load Regulation ± 0.5% Ripple and Noise (20Mhz bandwidth) 60 mV pk-pk Temperature Coefficient ± 0.02% / ° C General Specifications Efficiency See Table I/O Isolation Voltage (3 sec.) 1500 VDC

3500 VDC (optional - please add “H35”)

I/O Isolation Capacity 60 pF, typ. I/O Isolation Resistance 1000 M Ohm Switching Frequency (typical) 100 - 400 kHz Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 2.199 Mhrs Physical Specifications Case Material Non Conductive Black Plastic (UL94V-0 rated) Nickel Coated Copper (optional – please add “M”) Potting Material Epoxy (UL94V-0 rated) Weight ~12.5g, typ. (Plastic case - standard) ~15g, typ. (Metal case - optional) Environment Specifications Operating Temperature -40 to +85° C (ambient) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection (10mm distance required) RoHS Conform Soldering 260° C, max. (1.5mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PECO-Line combine 1.5W up to 6W output power w ith 2:1 or 4:1 wide input and regulated output. The converters are avai lable in plastic or optional metal DIP24 case with standard 1.5kV Isola tion or optional 3.5kV isolation. You can choose between 3 Pinnings. PECO-SERIES /checkbld 2 Watt /checkbld 2:1 Wide Input /checkbld Reg. Single and Dual Output /checkbld 1.5 – 3.5 kV DC I/O Isolation /checkbld DIP24 Plastic or Metal Case /checkbld Continuous Short Circuit Prot. /checkbld Full SMD Technology Rev.02-2010

PECO-Series – PECO2-x-xxxxE/Z2:1(H35)(M)LF – Single /Dual Output – DIP24 – Plastic/Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/4 Selection Guide Single Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t M in . L o a d (m A ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² SINGLE OUTPUT - standard (1.5kV, plastic case) PECO2-x-0505E2:1LF 4.5-9 40 588 5 100 400 68 2200 PECO2-x-0509E2:1LF 4.5-9 40 571 9 55.5 222 70 470 PECO2-x-0512E2:1LF 4.5-9 40 571 12 42.8 167 70 470 PECO2-x-0515E2:1LF 4.5-9 40 571 15 33.3 133 70 470 PECO2-x-0524E2:1LF 4.5-9 40 579 24 20.8 83 69 220 PECO2-x-1205E2:1LF 9-18 20 222 5 100 400 75 2200 PECO2-x-1209E2:1LF 9-18 20 213 9 55.5 222 78 470 PECO2-x-1212E2:1LF 9-18 20 213 12 42.8 167 78 470 PECO2-x-1215E2:1LF 9-18 20 213 15 33.3 133 78 470 PECO2-x-1224E2:1LF 9-18 20 210 24 20.8 83 79 220 PECO2-x-2405E2:1LF 18-36 12 106 5 100 400 78 2200 PECO2-x-2409E2:1LF 18-36 12 104 9 55.5 222 80 470 PECO2-x-2412E2:1LF 18-36 12 105 12 42.8 167 79 470 PECO2-x-2415E2:1LF 18-36 12 106 15 33.3 133 78 470 PECO2-x-2424E2:1LF 18-36 12 104 24 20.8 83 80 220 PECO2-x-4805E2:1LF 36-72 8 55.5 5 100 400 75 2200 PECO2-x-4809E2:1LF 36-72 8 53 9 55.5 222 78 470 PECO2-x-4812E2:1LF 36-72 8 52 12 42.8 167 79 470 PECO2-x-4815E2:1LF 36-72 8 52 15 33.3 133 80 470 PECO2-x-4824E2:1LF 36-72 8 52 24 20.8 83 80 220 If you need other specifications, please enquire. *OPTIONS: Please see table on page 3 and choose your pinning. (PECO2-A-2412E2:1LF for Pinning “A”) 3.5 kV I/O Isolation For optional 3.5kV DC I/O Isolation, please add “H35” before (M)LF! (PECO2-A-2412E2:1 H35LF) Metal case For optional Metal case, please add “M” before LF! (PECO2-A-2412E2:1H35 MLF)

PECO-Series – PECO2-x-xxxxE/Z2:1(H35)(M)LF – Single /Dual Output – DIP24 – Plastic/Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/4 Selection Guide Dual Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t M in . L o a d (m A ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² DUAL OUTPUT - standard (1.5kV, plastic case) PECO2-x-0505Z2:1LF 4.5-9 40 588 ± 5 ± 50 ± 200 68 ± 1000 PECO2-x-0509Z2:1LF 4.5-9 40 571 ± 9 ± 27.8 ± 111 70 ± 220 PECO2-x-0512Z2:1LF 4.5-9 40 571 ± 12 ± 20.8 ± 83 70 ± 220 PECO2-x-0515Z2:1LF 4.5-9 40 571 ± 15 ± 16.8 ± 67 70 ± 220 PECO2-x-0524Z2:1LF 4.5-9 40 579 ± 24 ± 10.5 ± 42 69 ± 100 PECO2-x-1205Z2:1LF 9-18 20 225 ± 5 ± 50 ± 200 74 ± 1000 PECO2-x-1209Z2:1LF 9-18 20 225 ± 9 ± 27.8 ± 111 74 ± 220 PECO2-x-1212Z2:1LF 9-18 20 219 ± 12 ± 20.8 ± 83 76 ± 220 PECO2-x-1215Z2:1LF 9-18 20 216 ± 15 ± 16.8 ± 67 77 ± 220 PECO2-x-1224Z2:1LF 9-18 20 219 ± 24 ± 10.5 ± 42 76 ± 100 PECO2-x-2405Z2:1LF 18-36 12 111 ± 5 ± 50 ± 200 75 ± 1000 PECO2-x-2409Z2:1LF 18-36 12 111 ± 9 ± 27.8 ± 111 75 ± 220 PECO2-x-2412Z2:1LF 18-36 12 105 ± 12 ± 20.8 ± 83 79 ± 220 PECO2-x-2415Z2:1LF 18-36 12 105 ± 15 ± 16.8 ± 67 79 ± 220 PECO2-x-2424Z2:1LF 18-36 12 106 ± 24 ± 10.5 ± 42 78 ± 100 PECO2-x-4805Z2:1LF 36-72 8 56 ± 5 ± 50 ± 200 74 ± 1000 PECO2-x-4809Z2:1LF 36-72 8 55.5 ± 9 ± 27.8 ± 111 75 ± 220 PECO2-x-4812Z2:1LF 36-72 8 53 ± 12 ± 20.8 ± 83 78 ± 220 PECO2-x-4815Z2:1LF 36-72 8 53 ± 15 ± 16.8 ± 67 78 ± 220 PECO2-x-4824Z2:1LF 36-72 8 53 ± 24 ± 10.5 ± 42 79 ± 100 If you need other specifications, please enquire. *OPTIONS: Please see table on page 3 and choose your pinning. (PECO2-A-2412Z2:1LF for Pinning “A”) 3.5 kV I/O Isolation For optional 3.5kV DC I/O Isolation, please add “H35” before (M)LF! (PECO2-A-2412Z2:1 H35 LF) Metal case For optional Metal case, please add “M” before LF! (PECO2-A-2412Z2:1H35 MLF)

PECO-Series – PECO2-x-xxxxE/Z2:1(H35)(M)LF – Single /Dual Output – DIP24 – Plastic/Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 4/4 Package / Pinning / Derating Standard Optional: Please add „M“ before LF # Single Dual # Single 1.5kV Dual 1.5kV # Single Dual 2 - Vin - Vin 1 +Vin +Vin 1 +Vin +Vin 3 - Vin - Vin 2 N.C. - Vout 2 +Vin +Vin 9 Omitted Common 3 N.C. Common 10 N.C. Common 11 N.C. - Vout 9 Omitted Omitted 11 N.C. Common 14 + Vout +Vout 10 - Vout Common 12 - Vout N.C. 16 - Vout Common 11 +Vout +Vout 13 +Vout - Vout 22 +Vin +Vin 12 - Vin - Vin 15 N.C. +Vout 23 +Vin +Vin 13 - Vin - Vin 23 - Vin - Vin Same pinning for 3.5kV models! 14 +Vout +Vout 24 - Vin - Vin 15 - Vout Common Same pinning for 3.5kV models!

16 Omitted Omitted

22 N.C. Common 23 N.C. - Vout 24 +Vin +Vin Only 1.5 kV isolation for pinning"B" available! PINNING “A” PINNING “B” PINNING “C” App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Tested by nominal Vin and constant resistor load. - Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications. Example: Pinning “C”, single output, metal case PECO 2 - C - 12 05 E 2:1 M LF Series

2 Watt Pinning

“C” Input voltage Output voltage single output 2:1 wide input Metal case RoHS Example: Pinning “A”, dual output, plastic case, 3. 5kV isolation PECO 2 - A - 24 12 Z 2:1 H35 LF Series “A” Input voltage Output voltage dual output 2:1 wide input 3.5kV isolation RoHS 100% 75% 50% 25% -40 0 20 40 60 80 100 OUTPUT POWER AMBIENT TEMPERATURE (° C) TEMPERATURE DERATING GRAPH