DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Rev. 7 Conductive Polymer Aluminum Solid Capacitors (SMT) RoHS MERITEK PECH Series
FEATURES
/g120 Low ESR, surface mounting, reduced height, wide temperature range. /g120 Suitable for DC-DC converters, voltage regulators and decoupling applications. /g120 Rated voltage: 2~2.5Vdc /g120 Endurance: 1000 hours at 105ºC /g120 RoHS compliant SPECIFICATIONS Item Characteristic Category Temperature Range -55ºC ~ +105/g113/g113C Rated Voltage Range 2.0VDC ~ 2.5VDC Capacitance Tolerance M=±20%, Y=+10%~-35% at 120Hz, 20ºC Leakage Current I /g100 0.01CV (2.0VDC ~ 2.5VDC) ġ at 20ºC after 2 minutes I : Leakage Current (/g80/g80A) C : Rated Capacitance(/g80F) V : Rated V oltage (V) Surge Voltage Rated voltage x 1.25V at -55ºC ~ +105/g113C Dissipation Factor ( tan /g71/g71 ) 0.06 (max) at 120Hz, 20ºC Endurance Appearance: No significant d amage Capacitance change: ±10% of the initial value DF(tanδ): within initial limit Leakage current: within initial limit at +10 5/g113/g113C rated voltage applied, 1000hours Damp Heat, Steady State Appearance: No significant d amage Capacitance change: +70%, -20% of the initial value DF(tanδ): ≤200% of the initial li mit Leakage current: within initial limit at +60/g113/g113C 90%~ 95% R.H., 500hours Damp Heat, Steady State, Applied Voltage Appearance: No significant d amage Capacitance change: +70%, -20% of the initial value DF(tanδ): ≤200% of the initial li mit Leakage current: within initial limi t rated voltage, 500hour s Surge Voltage Appearance: No significant d amage Capacitance change: ±10% of the initial value DF(tanδ): within initial limit Leakage current: within initial limit The capacitors shall be subjected to 1,000 cycles each cons isting of charge with the surge voltages, 125% rated voltage, at 105ºC for 30 seconds through a protective resistor (R=1kΩ) and discharge for 5 minutes 30seconds DIMENSIONS Dim Value BL 7.3±0.3 BW 4.3±0.3 EW 2.4±0.2 BH 1.9±0.3 EL 1.3±0.2 All Dimensions in mms PAD LAYOUT (mm) 2.4 2.8 3.82.4
Conductive Polymer Aluminum Solid Capacitors (SMT) PECH Series dsada SPECIFICATIONS Note: 1. Test condition: 20 ⁰C, 100KHz~300KHz 2. Test condition:105 ⁰C, 100KHz SOLDERING RECOMMENDATION Zone Name temperature Duration A 1st rising temperature The normal to preheating temperature 30s~60s B Preheating 140⁰C~160⁰C 60s~120s C 2nd rising temperature Preheating to 200⁰C 20s~40s D Main heating If 217⁰C 90s If 260⁰C 10s E Regular cooling 200⁰C~100⁰C 1⁰C/s ~4⁰C/s Part Number Working Voltage Capacitance Tolerance tanφ Leakage Current ESR1 Rated Ripple Current2 (VDC) (μF) (μA) (mΩ) MAX (mArms)