PEAW12I TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

© TT Electronics plc General Note All data sheets are subject to change without noƟce. ISS.6 13/03/2025 Page: 1 TT Electronics 155 Northboro Rd., Southborough, MA 01772, USA. t: +1 (978) 567 -9600 DescripƟon: The PEAW12I series of AC/DC wall mount switching power supplies provide 12 waƩs of conƟnuous power. They are Class II devices with interchangeable AC plugs that provide ease of use in several regions throughout the world and can be provided with a USB output connector. All models meet FCC, EN55032, and EN55035 class B emission limits, and comply with UL, IEC, CE, and more. Features:

  • Class II ConfiguraƟon
  • Efficiency Level VI
  • Interchangeable Plugs for Worldwide Use
  • OpƟonal USB (5V only) or Cable Output
  • Short Circuit ProtecƟon
  • Overload ProtecƟon
  • No Load OperaƟon Model Number Voltage Current Total Power Output RegulaƟon Ripple & Noise (P-P) Efficiency Level PEAW12I-10-B1 5VDC 2.4A 12W ±5% 100mV VI PEAW12I-10-USB 5VDC 2.4A 12W ±5% 100mV VI PEAW12I-10-1-B1 6VDC 2A 12W ±5% 100mV VI PEAW12I-11-B1 9VDC 1.33A 12W ±5% 180mV VI Notes:
  • Ripple & Noise is measured using a 20MHz bandwidth oscilloscope with a 0.1uf ceramic capacitor and 47uf electrolyƟc capacitor in parallel across the output at full load and nominal line voltage.
  • PEAW12I-10-USB has a standard USB A output port. All other models have at 4Ō cable terminated with a 5.5 x 2.1mm barrel connect-or. Consult PPI for custom connectors.
  • Shipped with USA AC Blade; others are opƟonal. PEAW12I-13-B1 15VDC 0.8A 12W ±5% 250mV VI PEAW12I-13-1-B1 18VDC 0.66A 12W ±5% 350mV VI PEAW12I-13-2-B1 19VDC 0.63A 12W ±5% 350mV VI PEAW12I-14-B1 24VDC 0.5A 12W ±5% 350mV VI PEAW12I-12-B1 12VDC 1A 12W ±5% 250mV VI

© TT Electronics plc General Note All data sheets are subject to change without noƟce. ISS.6 13/03/2025 Page: 2 TT Electronics 155 Northboro Rd., Southborough, MA 01772, USA. t: +1 (978) 567 -9600 SpecificaƟons Input Input Voltage 90-264VAC Input Frequency 47-63Hz Input Current <0.6A, 115VAC—230VAC Safety IsolaƟon 3.0kVAC Input to Output Inrush Current <30A peak @ 115VAC, cold start at 25°C <60A peak @ 230VAC, cold start at 25°C No Load Power <100mW Output Total Output 12W Output Voltage See table Hold Up Time >8.3m sec @ full load and 115VAC/60Hz input Turn on Time <3 seconds Efficiency Meets DOE level VI Requirements Minimum Load No Minimum Load Line RegulaƟon <± 1% of rated output voltage at full load ProtecƟon Features Overvoltage ProtecƟon 150% Max. of rated voltage. Latching mode. Cycle AC for recovery Overcurrent ProtecƟon 150% Max. of rated current. Auto-restart when fault removed. Short Circuit ProtecƟon Hiccup Mode. Auto Recovery Ingress IP22 Compliant Environmental OperaƟng Temperature 0°C to 60°C (Derate output power linearly from 100% at 40°C to 50% at 60°C) Storage Temperature -20°C to +85°C OperaƟng Humidity 10% - 90% non-condensing Storage Humidity 5% - 90% non-condensing OperaƟng AlƟtude <5000m General SpecificaƟons Dimensions 2.20”(56mm) x 1.46”(37mm) x 1.26”(32mm) Weight 0.3lbs MTBF >100,000 hours per MIL-HDBK-217F at full load and 25°C ambient AC Input Receptacle Interchangeable Plugs DC output Plug Barrel Type: 5.5mm x 2.1mm x 9.5mm Center posiƟve (others upon request) OpƟonal USB output for 5V models

© TT Electronics plc General Note All data sheets are subject to change without noƟce. ISS.6 13/03/2025 Page: 3 TT Electronics 155 Northboro Rd., Southborough, MA 01772, USA. t: +1 (978) 567 -9600 SpecificaƟons ConƟnued Safety Approvals UL/cUL62368-1 TUV EN62368-1 CB IEC62368-1 *Consult with TT Electronics for informaƟon on addiƟonal country safety approvals EMC EMC FCC Class B Radiated & Conducted CISPR32 Class B Radiated & Conducted EN55032 Class B Radiated & Conducted EN55035 Class B Harmonic Currents Voltage Flicker ElectrostaƟc Discharge Radiated Immunity EFT/Burst Surge Immunity Conducted Immunity MagneƟc Field Dips/InterrupƟons IEC 61000-3-2 IEC 61000-3-3 IEC 61000-4-2: ±8kV Air, ±4kV contact IEC 61000-4-3: 3V/m IEC 61000-4-4: ±1kV IEC 61000-4-5: 2005 1kV diff, 2kV com IEC 61000-4-6: 3Vrms IEC 61000-4-8: 1A/m IEC 61000-4-11: 30% reducƟon for 500ms, >95% reducƟon for 10ms.

© TT Electronics plc General Note All data sheets are subject to change without noƟce. ISS.6 13/03/2025 Page: 4 TT Electronics 155 Northboro Rd., Southborough, MA 01772, USA. t: +1 (978) 567 -9600 Diagrams *Shipped with USA AC Blade; others are optional.