PEAMD310 TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

© TT Electronics plc General Note All data sheets are subject to change without notice. ISS.1 14/07/2020 Page: 1 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Description: The PEAMD310 series of AC/DC desktop power supplies provides up to 310W of continuous output power. Available in both Class I and Class II construction types, the PEAMD180 series can be ordered with a C14 or C18 AC inlet. The PEAMD310 series is 60601-1-2 4th edition EMC compliant, DoE Level VI compliant and offers a suite of built in protection features. Features:

  • IEC 60601-1-2 4th Edition EMC Compliant
  • Class I and Class II Versions
  • Meets Efficiency Level VI Requirements
  • BF Rated Output on Class II Versions
  • LED on Indicator
  • Overload Protection
  • Short Circuit Protection
  • Over-temperature Protection
  • No Load Operation Model Number Voltage Current Total Power Load Regulation Line Regulation Ripple & Noise (P-P) PEAMD310-12 12VDC 20.83A 250W ±5% ±2% 240mV PEAMD310-13 15VDC 16.66A 250W ±5% ±2% 300mV PEAMD310-13-2 19VDC 15.79A 300W ±5% ±2% 380mV PEAMD310-14 24VDC 12.50A 300W ±5% ±2% 480mV PEAMD310-17 36VDC 8.61A 310W ±5% ±2% 720mV PEAMD310-18 48VDC 6.45A 310W ±5% ±2% 960mV NOTES: C14 Standard Receptacle For C8 input receptacle, model numbers are PEAMD310SF, For Example PEAMD310SF-12 For C6 input receptacle, model numbers are PEAMD310S, For Example PEAMD310S-12 For C18 input receptacle, model numbers are PEAMD310F, For Example PEAMD310F-12

© TT Electronics plc General Note All data sheets are subject to change without notice. ISS.1 14/07/2020 Page: 2 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Specifications Input Input Voltage 90-264VAC Input Frequency 47-63Hz Input Current 5A max at 115VAC 2.5A max at 230VAC Inrush Current <75A peak at 115VAC; <150A peak at 230VAC, cold start, 25°C Power Factor >0.9 Output Total Output Power 250-310W (see table for details) Output Voltage See table Hold Up Time >10ms at full load and 115VAC nominal Earth Leakage Current (Class I) <110uA max. at 264VAC 60Hz Touch Current <100uA max. at 264VAC. 60Hz Average Active Efficiency >87.5% with 115VAC/60Hz &230VAC/50Hz input voltage (Meets DOE Level VI requirements) No Load Power Consumption <500mW Turn on Delay <3 seconds Protection Features Overvoltage Protection 110%-150% of nominal. Cycle AC power to reset after fault is re- moved Overload Protection 105-150% of maximum output current. Auto Recovery Short Circuit Protection Hiccup Mode. Auto Recovery Over Temperature Protection Output disabled during fault. Cycle AC power to reset Ingress IP22 Compliant Environmental Operating Temperature 0ºC to 60ºC (Derate output power linearly from 100% at 40°C to 50% at 60°C) Storage Temperature -20°C to +85°C Humidity 10% - 90% non-condensing Altitude <5000m operational and storage General Specifications Dimensions 7.8”(198mm) x 4”(102mm) x 2”(51mm) Weight 3lb MTBF >100,000 hours per MIL-HDBK-217F at full load and 25°C ambient AC Input Receptacle IEC60320 C14, C18 DC output Plug 6--pin Molex mini-fit. Others available upon request

© TT Electronics plc General Note All data sheets are subject to change without notice. ISS.1 14/07/2020 Page: 3 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Specifications Continued Safety Approved to USA/Canada ANSI/AAMI ES60601-1 cUL ES60601-1 Approved to Europe TUV EN60601-1 3rd edition Isolation CB Report 4000VAC input to output, 2 x MOPP

1500 VAC input to ground,1 x MOPP

*Consult with TT Electronics for information on additional country safety approvals EMC EMC (IEC60601-1-2:2014) FCC Class B Radiated & Conducted CISPR11 Class B Radiated & Conducted EN55011 Class B Radiated & Conducted Harmonic Currents Voltage Flicker Electrostatic Discharge Radiated Immunity EFT/Burst Surge Immunity Conducted Immunity Magnetic Field Dips/Interruptions IEC 61000-3-2 IEC 61000-3-3 IEC 61000-4-2: ±15kV Air, ±8kV contact IEC 61000-4-3: 10V/m IEC 61000-4-4: ±2kV IEC 61000-4-5: 1kV diff, 2kV com IEC 61000-4-6: 10Vrms IEC 61000-4-8: 30A/m IEC 61000-4-11: Voltage dip immunity, 30% reduction for 500ms, 100% reduction for 10ms

TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 © TT Electronics plc General Note All data sheets are subject to change without notice. ISS.1 14/07/2020 Page: 4 Diagrams