PEAD180 TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

© TT Electronics plc General Note All data sheets are subject to change without notice. ISS.13 27/04/2021 Page: 1 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Description: The PEAD180 series of AC/DC switching power supplies are for 160-180 watts of continuous power. They are available as Class I or Class II devices with the inlet of the IEC320/C14, C6, C8, or C18 to mate with an interchangeable cord for world-wide use. All models meet FCC, EN55032, and CISPR32 class B emission limits, and comply with UL, IEC, DOE level VI, CE, and more. Features:

  • Class I and Class II Versions
  • Efficiency Level VI
  • Active Power Factor Correction
  • CoC Tier 2
  • Overload Protection
  • Short Circuit Protection
  • No Load Operation
  • 100% Burn-in/ Hi-Pot Testing
  • RoHS Compliant Model Voltage Max Current Total Power Load Regulation Line Regulation Ripple & Noise (P-P) PEAD180-12 12VDC 13.33A 160W ±5% ±1% 240mV PEAD180-13 15VDC 10.66A 160W ±5% ±1% 240mV PEAD180-13-2 19VDC 9.47A 180W ±5% ±1% 360mV PEAD180-14 24VDC 7.5A 180W ±5% ±1% 360mV PEAD180-17 36VDC 5.0A 180W ±5% ±1% 630mV PEAD180-18 48VDC 3.75A 180W ±5% ±1% 840mV PEAD180-19-1 56VDC 3.21A 180W ±5% ±1% 840mV NOTES: C14 Standard Receptacle. For C6 Class I Receptacle , model number is PEAD180S, for example PEAD180S-12. For C8 Class II Receptacle , model number is PEAD180SF, for example PEAD180SF-12. For C18 Class II Receptacle, model number is PEAD180F, for example PEAD180F-12. *Consult with TT Electronics for information on safety approvals per model.

© TT Electronics plc General Note All data sheets are subject to change without notice. ISS.13 27/04/2021 Page: 2 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Specifications Input Input Voltage 90-264VAC Input Frequency 47-63 Hz Input Current 2.5A max at 115 VAC 1.3A max at 230 VAC Inrush Current <60A peak at 115VAC <120A peak at 230VAC, cold start, 25ºC Safety Isolation 3.0kVAC Input to Output 1.5kVAC Input to Ground Leakage Current 250µA max. at 240VAC Power Factor >0.95 @100VAC and >0.9 @240Vac Output Total Output Power 180W max Output Voltage See Table Hold Up Time ≥10mS typical/full load/115VAC Average Active efficiency >88% with 115VAC/60Hz & 230Vac/50Hz input voltage (CEC level VI compliant) No Load Power Consumption <210mW at 230VAC/50Hz Turn on Delay <3 seconds Rise Time <50mS at full load from 10%-90% of output voltage Minimum Load No minimum load Protection Features Overvoltage Protection 150% Max. of nominal. Cycle AC power to reset after fault is re- moved Overcurrent Protection 110%-150% of maximum output current. Auto recovery Short Circuit Hiccup mode. Auto recovery Ingress IP22 Compliant Environmental Operating Temperature 0ºC to 60ºC (Derate output power linearly from 100% at 40°C to 50% at 60°C) Storage Temperature -20ºC to +85ºC Operating Humidity 10% - 90% non-condensing Altitude <5000m operational and storage General Specifications Weight 1.55lb MTBF >100,000 hours per MIL-HDBK-217F at full load and 25ºC ambient AC Input Receptacle IEC60320 C14, C6, C8, C18 DC output Plug Kycon KPP-4P equivalent, others available upon request

© TT Electronics plc General Note All data sheets are subject to change without notice. ISS.13 27/04/2021 Page: 3 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Specifications Continued Safety Approvals UL62368-1 cUL623628-1 TUV EN62368-1/A12: 2011 CB Report EN62368-1 *Consult with TT Electronics for information on additional country safety approvals EMC Emissions FCC Class B Radiated & Conducted CISPR32 Class B Radiated & Conducted EN55032 Class B Radiated & Conducted EN55024: 2010 Harmonic Currents Voltage Flicker Electrostatic Discharge Radiated Immunity EFT Surge Immunity Conducted Immunity Power Frequency Magnetic Field Immunity Dips/Interruptions IEC 61000-3-2 IEC 61000-3-3 IEC 61000-4-2: 8kV Air, 6kV contact IEC 61000-4-3: 3V/m IEC 61000-4-5: 2005 1kV diff, 2kV com Optional 2kV diff, 4kV com IEC 61000-4-6: 3Vrms IEC 61000-4-8: 1A/m IEC 61000-4-11: 30% reduction for 500ms, >95% reduction for 10ms.

TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567 -9600 © TT Electronics plc General Note All data sheets are subject to change without notice. ISS.13 27/04/2021 Page: 4 Diagrams