PEA1-1509ZLF

PEA1-0505ELF PEAK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

PMM1-Series – PEA1-xxxxE/Z (H30) LF – Single and Du al Output – SIP7 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/3 PEA1-xxxxE/Z (H30) LF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range ± 10% Input Filter Capacitor Input Reflected Ripple Current¹ 20 mA (5, 12V) 30mA (15V) 40mA (24V) 50mA (48V) pk-pk Output Specifications Voltage Accuracy ± 3% Short Circuit Protection Short Term Line Regulation ± 1.2% / 1% Vin Change Load Regulation (10% - 100%) See table Ripple and Noise (20Mhz bandwidth) 50 mV pk-pk Temperature Coefficient ± 0.02% / ° C General Specifications Efficiency See Table I/O Isolation Voltage (3 sec.) 1000 VDC (3000VDC optional)* I/O Isolation Capacity 60 pF, typ. I/O Isolation Resistance 1G Ohm Switching Frequency 70 kHz (Variable) Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 2 Mhrs Physical Specifications Case Material Non Conductive Black Plastic (UL94V-0 rated) Potting Material Epoxy (UL94V-0 rated) Weight ~ 2.3g, typ. Environment Specifications Operating Temperature -40 to +85° C (ambient) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection (10 mm distance required) RoHS Conform Soldering 260° C, max. (1.5 mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The P MM 1 series PEA1 -xxxxE/Z (H30) LF is a family of cost eff ective 1 W single & dual output DC-DC converters. These conver ters are in an ultra miniature SIP7 case. Devices are encapsulated. High performance features: 1000 – 3000 VDC input/output isolation, h igh efficiency operation, output voltage accuracy of ±3% maximum, input range of ±10% tolerance and low output ripple and noise. PMM1-SERIES /checkbld 1 Watt /checkbld Semi Regulated /checkbld Single and Dual Output /checkbld SIP7 Case /checkbld 1 - 3 kV DC I/O Isolation /checkbld Low Ripple and Noise /checkbld High Efiiciency Rev.07-2010

PMM1-Series – PEA1-xxxxE/Z (H30) LF – Single and Du al Output – SIP7 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/3 Selection Guide Single / Dual Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t F u ll L o a d (m A ) L o a d R e g u la tio n (% ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² SINGLE OUTPUT PEA1-0505ELF 5 20 250 5 200 6 84 220 PEA1-0509ELF 5 20 230 9 111.1 5.5 86 220 PEA1-0512ELF 5 20 230 12 83.3 5.5 87 100 PEA1-0515ELF 5 20 230 15 66.7 5 87 100 PEA1-1205ELF 12 15 98 5 200 4 84 220 PEA1-1209ELF 12 15 96 9 111.1 3.5 86 220 PEA1-1212ELF 12 15 95 12 83.3 3.5 88 100 PEA1-1215ELF 12 15 95 15 66.7 3 88 100 PEA1-1505ELF 15 10 79 5 200 4 84 220 PEA1-1509ELF 15 10 77 9 111.1 3.5 86 220 PEA1-1512ELF 15 10 76 12 83.3 3.5 87 100 PEA1-1515ELF 15 10 76 15 66.7 3 89 100 PEA1-2405ELF 24 7 50 5 200 4 83 220 PEA1-2409ELF 24 7 49 9 111.1 3.5 86 220 PEA1-2412ELF 24 7 49 12 83.3 3.5 87 100 PEA1-2415ELF 24 7 49 15 66.7 3 87 100 PEA1-4805ELF 48 5 27 5 200 4 79 220 PEA1-4809ELF 48 5 26 9 111.1 3.5 82 220 PEA1-4812ELF 48 5 26 12 83.3 3 82 100 PEA1-4815ELF 48 5 26 15 66.7 3 81 100 DUAL OUTPUT PEA1-0505ZLF 5 20 250 ± 5 ± 100 6 84 ± 100 PEA1-0509ZLF 5 20 228 ± 9 ± 55.55 5.5 86 ± 100 PEA1-0512ZLF 5 20 228 ± 12 ± 41.67 5.5 87 ± 47 PEA1-0515ZLF 5 20 225 ± 15 ± 33.33 5 88 ± 47 PEA1-1205ZLF 12 15 98 ± 5 ± 100 4 85 ± 100 PEA1-1209ZLF 12 15 95 ± 9 ± 55.55 3.5 86 ± 100 PEA1-1212ZLF 12 15 94 ± 12 ± 41.67 3.5 89 ± 47 PEA1-1215ZLF 12 15 94 ± 15 ± 33.33 3 89 ± 47 PEA1-1505ZLF 15 10 78 ± 5 ± 100 3.5 85 ± 100 PEA1-1509ZLF 15 10 76 ± 9 ± 55.55 2.5 87 ± 100 PEA1-1512ZLF 15 10 76 ± 12 ± 41.67 2.5 87 ± 47 PEA1-1515ZLF 15 10 75 ± 15 ± 33.33 2.5 89 ± 47 PEA1-2405ZLF 24 7 50 ± 5 ± 100 3.5 84 ± 100 PEA1-2409ZLF 24 7 48 ± 9 ± 55.55 2.5 87 ± 100 PEA1-2412ZLF 24 7 48 ± 12 ± 41.67 2.5 87 ± 47 PEA1-2415ZLF 24 7 48 ± 15 ± 33.33 2.5 87 ± 47 PEA1-4805ZLF 48 5 27 ± 5 ± 100 3 80 ± 100 PEA1-4809ZLF 48 5 26 ± 9 ± 55.55 3 82 ± 100 PEA1-4812ZLF 48 5 26 ± 12 ± 41.67 3 82 ± 47 PEA1-4815ZLF 48 5 26 ± 15 ± 33.33 2 82 ± 47 * For optional 3kV Isolation please add “H30” between E/Z and LF! Example: PEA1-2415E H30 LF for 3kV isolation.

PMM1-Series – PEA1-xxxxE/Z (H30) LF – Single and Du al Output – SIP7 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/3 Package / Pinning / Derating Modelcode Datecode 1 2 4 5 6 7 6.00* (0.24)19.50 (0.76) 15.24 (0.60) 2.54 (0.10) 0.50 (0.02) 0.50 (0.02) 2.1 (0.9) All dimensions are typical in millimeters (inches). - Pin diameter: 0.5 +/-0.05 (0.02 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Specification may change without notice. * The thickness of 48Vin voltage is 7.20(0.28) PE AK SIP 7 – PLASTIC CASE # SINGLE DUAL SINGLE 3kV DUAL 3kV 1 +Vin +Vin +Vin +Vin 2 - Vin - Vin - Vin - Vin 4 - Vout - Vout Omitted Omitted

5 Omitted Common - Vout - Vout

6 +Vout +Vout Omitted Common

7 Omitted Omitted +Vout +Vout

App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Tested by minimal Vin and constant resistive load. - Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications. * For optional 3kV Isolation please add “H30” between E/Z and LF! Example: PEA1-2415E H30 LF for 3kV isolation. Input filter components (C1, C2, L) are used to help meet conducted emissions requirement for the module. These components should be mounted as close as possible to the module; all leads should be minimized to decrease radiated noise. EMC SPECIFICATIONS Radiated Emissions EN 55022 CLASS A ESD IEC 61000-4-2 Perf. Criteria A RS IEC 61000-4-3 Perf. Criteria A C1 L C2 PEA1-05xxXLF 1210, 10uF/35V 10 uH PEA1-12xxXLF 1210, 10uF/35V 10 uH PEA1-15xxXLF 1210, 10uF/35V 10 uH PEA1-24xxXLF 1210, 10uF/35V 10 uH PEA1-48xxXLF 1210, 2.2uF/100V 18 uH 1210, 2.2uF/100V