PE95420 PSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

Features

  • HaRP™ -Technology-Enhanced
  • Eliminates Gate and Phase Lag
  • No Insertion Loss or Phase Drift
  • High Linearity: 60 dBm IIP3
  • Low Insertion Loss:
  • 0.77 dB at 100 MHz
  • 1.0 dB at 3000 MHz
  • 1.15 dB at 6000 MHz
  • 1.38 dB at 8500 MHz
  • High Isolation (RF1-RF2)
  • 86.5 dB at 100 MHz
  • 48.2 dB at 3000 MHz
  • 36.6 dB at 6000 MHz
  • 27.8 dB at 8500 MHz
  • Fast Switching Time
  • 700 ns RF ON
  • 300 ns RF OFF
  • Ultra-Low Power Consumption
  • 3.3 µW @ 3.3 V
  • 1 dB Compression Point of +33 dBm
  • Single-pin 3.3 V CMOS logic control
  • ESD tolerant to 2000 V HBM
  • Absorptive/Non-Reflective
  • Offered in a 7-lead Hermetic CSOIC Surface-Mount Package and in DIE form

Figure 2. Package Type

  • Medical
  • Automotive
  • Telecom Infrastructure
  • Test Instrumentation
  • Down-hole oil/gas
  • Military
  • Commercial space applications Typical Industries RF1 RF2 CTRL LS RFC 50 Ω50 Ω CMOS Control Driver ESD ESD VDD VSS

Table 1. Electrical Specifications @ -40° C ≤ T ≤ 85° C & 3.0V ≤ VDD ≤ 3.6V

8500 MHz (note 2) 31 38 dB

100 MHz 21 dB

3000 MHz 33 dB

6000 MHz 20 dB

8500 MHz 15 dB

100 MHz 20 dB

3000 MHz 18 dB

6000 MHz 15 dB

8500 MHz 8 dB

Note: 1. Please note Maximum Operating Pin (50 Ω) of +24dBm in Table 3 .

  1. Guaranteed but not tested

Table 2. Pin Descriptions Figure 3. Pin Layout (Top View)

1 RFC 1 RF Common

2 RF1 1 RF Port 1

4 LS Selects the RF1 to RFC path

5 CTRL Selects the RF2 to RFC path

7 RF2

1 RF Port 2

must be grounded for proper device operation. devices are immune to latch-up. The PE95420 has a maximum 25 kHz switching rate. Table 6. Truth Table Table 5. Absolute Maximum Ratings Table 3. Operating Ranges maximum for extended periods may reduce reliability.

  • Invalid state that should not be used for normal operation.

Table 4. Post Radiation Table

Figure 25. Evaluation Kit Schematic Figure 24. Evaluation Board Layout of 15 mils and gap of 7 mils.

2 RF1

3 VDD

5 CTRL

6 VSS

Figure 26. Package Drawing

Table 7. Ordering Information Figure 27. Top Marking

Peregrine Semiconductor Corporation

9380 Carroll Park Drive

San Diego, CA 92121 Tel: 858-731-9400 Fax: 858-731-9499 Europe Peregrine Semiconductor Europe Bâtiment Maine 13-15 rue des Quatre Vents F-92380 Garches, France Tel: +33-1-4741-9173 Fax : +33-1-4741-9173 For a list of representatives in your area, please refer to our Web site at: www.psemi.com Data Sheet Identification Advance Information The product is in a formative or design stage. The data sheet contains design target specifications for product development. Specifications and features may change in any manner without notice. Preliminary Specification The data sheet contains preliminary data. Additional data may be added at a later date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best possible product. Product Specification The data sheet contains final data. In the event Peregrine decides to change the specifications, Peregrine will notify customers of the intended changes by issuing a CNF (Customer Notification Form). The information in this data sheet is believed to be reliable. However, Peregrine assumes no liability for the use of this information. Use shall be entirely at the user’s own risk. No patent rights or licenses to any circuits described in this data sheet are implied or granted to any third party. Peregrine’s products are not designed or intended for use in devices or systems intended for surgical implant, or in other applications intended to support or sustain life, or in any application in which the failure of the Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no liability for damages, including consequential or incidental damages, arising out of the use of its products in such applications. The Peregrine name, logo, and UTSi are registered trademarks and UltraCMOS, HaRP, MultiSwitch and DuNE are trademarks of Peregrine Semiconductor Corp. High-Reliability and Defense Products Americas San Diego, CA, USA Phone: 858-731-9475 Fax: 848-731-9499 Europe/Asia-Pacific Parc Cezanne 1

380 Avenue Archimède, Parc de la Duranne

13857 Aix-En-Provence Cedex 3, France

Phone: +33-4-4239-3361 Fax: +33-4-4239-7227 Peregrine Semiconductor, Asia Pacific (APAC) Shanghai, 200040, P.R. China Tel: +86-21-5836-8276 Fax: +86-21-5836-7652 Peregrine Semiconductor, Korea #B-2607, Kolon Tripolis, 210 Geumgok-dong, Bundang-gu, Seongnam-si Gyeonggi-do, 463-943 South Korea Tel: +82-31-728-3939 Fax: +82-31-728-3940 Peregrine Semiconductor K.K., Japan Teikoku Hotel Tower 10B-6 1-1-1 Uchisaiwai-cho, Chiyoda-ku Tokyo 100-0011 Japan Tel: +81-3-3502-5211 Fax: +81-3-3502-5213