PE5K MERITEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Rev. 7 Conductive Polymer Aluminum Solid Capacitors (Radial type) RoHS MERITEK PE5K Series
FEATURES
Super low ESR, high ripple current capability Rated voltage: 2.5V DC ~16VDC Endurance: 5000hours at 105ºC Suitable for DC-DC converters, voltage regulators and decoupling applications. S PECIFICATIONS Item Characteristic Category Temperature Range -55ºC ~ +105C Rated Voltage Range 2.5VDC ~ 16VDC Surge Voltage Rated voltage x 1.15V at +105C Capacitance Tolerance M=±20% at 120Hz, 20ºC Leakage Current Shall not exceed values shown in standard ratings at 20ºC after 2 minutes Dissipation Factor ( tan ) 0.1 (max) at 120Hz, 20ºC Temperature Stability Impedance change Z(-55ºC)/Z(+20ºC)≤1.25 at -55C, 100kHz Z(+105ºC)/Z(+20ºC)≤1.25 at +105C, 100kHz Endurance Appearance: no significant damage Capacitance change: ≤ ±20% of the initial value DF(tanδ): ≤ 150% of the initial specified value ESR: ≤ 150% of the initial specified value Leakage current: ≤ the initial specified value The specifications shall be satisfied when the capacitors are restored to 20ºC after the rated voltage is applied for 5000hours at 105ºC Damp Heat, Steady State Appearance: no significant damage Capacitance change: ≤ ±20% of the initial value DF(tanδ): ≤ 150% of the initial specified value ESR: ≤ 150% of the initial specified value Leakage current: ≤ the initial specified value The specifications shall be satisfied when the capacitors are restored to 20ºC after subjecting them to store at 60ºC, 90%~ 95% R.H. for 1000hours, without DC applied. Surge Voltage Appearance: no significant damage Capacitance change: ≤ ±20% of the initial value DF(tanδ): ≤ 150% of the initial specified value ESR: ≤ 150% of the initial specified value Leakage current: ≤ the initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 105ºC for 30 seconds through a protective resistor (R=1kΩ) and discharge for 5 minutes 30 seconds NOTE: If any doubt arises, measure the leakage current after following voltage treatment - Voltage treatment: DC rated voltage is applied to the capacitors for 60 minutes at 105ºC DIMENSIONS (mm) Size code 0509 0606 0609 0809 0812 1012
Conductive Polymer Aluminum Rev. 7 Solid Capacitors (Radial type) RoHS MERITEK PE5K Series SPECIFICATIONS Item Working Voltage(SV) Capacitance Size Code Leakage Current ESR1 Rated Ripple Current2 (Vdc) (uF) (uA) (mΩ), max (mArms) PE5K2R5561M0509 2.5(2.9) 560 0509 500 7 4180 PE5K2R5561M0609 2.5(2.9) 560 0609 500 7 5000 PE5K2R5561M0809 2.5(2.9) 560 0809 500 7 5700 PE5K2R5821M0609 2.5(2.9) 820 0609 500 7 5000 PE5K2R5821M0809 2.5(2.9) 820 0809 500 7 5700 PE5K4R0561M0609 4.0(4.6) 560 0609 500 7 5000 PE5K4R0561M0609 4.0(4.6) 560 0609 500 24 2400 PE5K6R3101M0606 6.3(7.2) 100 0606 126 35 2100 PE5K6R3471M0609 6.3(7.2) 470 0609 592 8 4700 PE5K6R3471M0809 6.3(7.2) 470 0809 592 8 5300 PE5K6R3561M0609 6.3(7.2) 560 0609 705 8 4700 PE5K6R3561M0609 6.3(7.2) 560 0609 705 24 2400 PE5K6R3561M0809 6.3(7.2) 560 0809 705 7 5700 PE5K16V101M0606 16(18.4) 100 0606 320 24 2490 PE5K16V101M0609 16(18.4) 100 0609 320 35 2300 PE5K16V271M0809 16(18.4) 270 0809 864 10 5000 PE5K16V271M0812 16(18.4) 270 0812 864 10 5230 PE5K16V471M0812 16(18.4) 470 0812 1505 10 5230 PE5K16V471M1012 16(18.4) 470 1012 1505 10 6100 NOTE: 1. Test condition: 20ºC, 100kHz~300kHz 2. Test condition: 105ºC, 100kHz