PE3345BEV PLETRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Product information is current as of publication date. The product conforms Copyright © 2005, 2006, 2007, 2008 Pletronics Inc. to specifications per the terms of the Pletronics standard warranty. Production processsing does not necessarily include testing of all parameters. PE3XB Series 3.3 V PECL Clock Oscillators January 2008 This device is obsolete, January 2008 The PE33B is replaced by the PE91xxDV device The PE37B is replaced by the PE97xxDV device For new designs use the PE99xxDV device

  • Pletronics’ PE3XB Series is a quartz crystal controlled precision square wave generator with an PECL output.
  • Solder pad compatible with many 9x14 Plastic J lead packages.
  • FR4 base with a mechanical metal cover.
  • Tape and Reel or Tube packaging is available.
  • 1 to 250 MHz
  • 9.9 mm x 13.97 mm ‘B’ package
  • Enable/Disable Function: PE33B on pad 2 PE37B on pad 1
  • Low Jitter Pletronics Inc. certifies this device is in accordance with the RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives. Pletronics Inc. guarantees the device does not contain the following: Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s Weight of the Device: 1.34 or .66 grams Moisture Sensitivity Level: 1 As defined in J-STD-020C Second Level Interconnect code: e4 Absolute Maximum Ratings: Parameter Unit VCC Supply Voltage -0.5V to +6.5V Vi Input Voltage -0.5V to V CC + 0.5V Vo Output Voltage -0.5V to V CC + 0.5V Thermal Characteristics The maximum die or junction temperature is 155oC The thermal resistance junction to board is 60 to 100oC/Watt depending on the solder pads, ground plane and construction of the PCB.

PE3XB Series 3.3 V PECL Clock Oscillators Jan uary 2008 www.pletronics.com 425-776-1880 2 Part Number: PE33 45 B E V -125.0M -XX Part Marking: Packaging code or blank T250 = 250 per Tape and Reel T500 = 500 per Tape and Reel T1K = 1000 per Tape and Reel PLE PE33B FFFFFM C YMDXX or PLE PE37B FFFFFM C YMDXX or PE33BX FFFFFM PLE XX C YYWWXX or PE37BX FFFFFM PLE XX C YYWWXX Frequency in MHz Supply Voltage V CC V = 3.3V +_ 10% Optional Enhanced OTR E = Temperature range -40 to 85oC Series Model Frequency Stability 45 = +_ 50 ppm 44 = +_ 25 ppm 20 = +_ 20 ppm Series Model PE33 = E/D on pad 2 PE37 = E/D on pad 1 Legend: PLE = Pletronics FFFFFM = Frequency in MHz YMD or YYWW = Date of Manufacture (Year - month - day or year and week) All other marking is internal factory codes Specifications such as frequency stability, supply voltage and operating temperature range, etc. are not identified from the marking. External packaging labels and packing list will correctly identify the ordered Pletronics part number. Codes for Date Code YMD Code 6 7 8 9 0 1 2 Year 2006 2007 2008 2009 2010 2011 2012 Code A B C D E F G H J K L M Month JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC C o d e 123456789A B C Day 123456789 1 0 1 1 1 2 Code D E F G H J K L M N P R Day 13 14 15 16 17 18 19 20 21 22 23 24 Code T U V W X Y Z

PE3XB Series 3.3 V PECL Clock Oscillators Jan uary 2008 www.pletronics.com 425-776-1880 3 Day 25 26 27 28 29 30 31 Electrical Specification for 3.30V +_10% over the specified temperature range Item Min Max Unit Condition Frequency Range 1 250 MHz Frequency Accuracy “45" -50 +50 ppm For all supply voltages, load changes, aging for 1 year, shock, vibration and temperatures “44" -25 +25 “20" -20 +20 Output Waveform PECL /ECL Output High Level (0oC to 85oC) 2.275 2.420 volts Ref erenced to Ground, VCC = 3.3 V 0.975 1.120 volts Referenced to termination voltage, VCC = 3.3 V -1.025 -0.880 volts Referenced to Vcc, V CC = 3.3 V Output High Level (-40oC) 2.216 2.420 volts Ref erenced to Ground, VCC = 3.3 V 0.916 1.120 volts Referenced to termination voltage, VCC = 3.3 V -1.084 -0.88 volts Referenced to Vcc, V CC = 3.3 V Output Low Level (0oC to 85oC) 1.490 1.680 volts Ref erenced to Ground, VCC = 3.3 V 0.190 0.380 volts Referenced to termination voltage, VCC = 3.3 V -1.810 -1.620 volts Referenced to Vcc, V CC = 3.3 V Output Low Level (-40oC) 1.470 1.745 volts Ref erenced to Ground, VCC = 3.3 V 0.170 0.445 volts Referenced to termination voltage, VCC = 3.3 V -1.830 -1.555 volts Referenced to Vcc, V CC = 3.3 V Output Symmetry 45 55 % at 50% point of V CC (See load circuit) Jitter - 0.2 pS RMS 12 KHz to 20 MHz from the output frequency - 2.8 pS RMS 10 Hz to 1 MHz from the output frequency Output TRISE and TFALL - 0.7 nS Vth is 20% and 80% of waveform VCC Supply Current (ICC)- 9 0 m A Enable/Disable Internal Pull-up 50 - Kohm to V CC V disable - 0.6 volts Referenced to pad 3 V enable 2.40 - volts Enable time - 100 nS Time for output to reach a logic state Disable time - 100 nS Time for output to reach a high Z state Start up time - 10 mS Time for output to reach specified frequency Operating Temperature Range 0 +70 oC Standard Temperature Range - 40 +85 oC Extended Temperature Range “E” Option Storage Temperature Range -55 +125 oC Specifications with E/D pad open circuit

PE3XB Series 3.3 V PECL Clock Oscillators Jan uary 2008 www.pletronics.com 425-776-1880 4 -160 -140 -120 -100 -80 -60 -40 -20 10 1,000 100,000 10,000,000 Frequency (Hz) dBc/Hz Showing Out Measurement only Trise Symmetry 20% Vlow 50% 80% Vhigh Tfall Out* Out Typical Phase-Noise Response Load Circuit E/D shown on pad 1 for PE37B, will be on pad 2 for PE33B Test Waveform

PE3XB Series 3.3 V PECL Clock Oscillators Jan uary 2008 www.pletronics.com 425-776-1880 5 Reliability: Environmental Compliance Parameter Condition Mechanical Shock MIL-STD-883 Method 2002, Condition B Vibration MIL-STD-883 Method 2007, Condition A Solderability MIL-STD-883 Method 2003 Thermal Shock MIL-STD-883 Method 1011, Condition A ESD Rating Model Minimum Voltage Conditions Human Body Model 1500 MIL-STD-883 Method 3115 Charged Device Model 1000 JESD 22-C101 Package Labeling Font is Courier New Font is Arial Bar code is 39-Full ASCII Layout and application information Recommend connecting Pad 1 and Pad 2 together to permit the design to accept Enable/Disable on both input pads For Optimum Jitter Performance, Pletronics recommends:

  • a ground plane under the device
  • no large transient signals (both current and voltage) should be routed under the device
  • do not layout near a large magnetic field su ch as a high frequency switching power supply
  • do not place near piezoelectric buzzers or mechanical fans.

PE3XB Series 3.3 V PECL Clock Oscillators Jan uary 2008 www.pletronics.com 425-776-1880 6 Mechanical: Inches mm FR4 PCB Base: Solder masked All via holes tented on bottom Copper Clad ½ oz. Typical Gold plated 0.02 µinch (0.5 µm) Label: White Kapton with Black Letters –or-- Blue Epoxy heat cure ink covering top with laser marked lettering Cover: Centered on the base

304 Stainless Steel

0.010 inch (0.25µm) Electroless Nickel Plated 1 µinch (25 µm) typical Pin 3 Ground plane is typical Not to scale D 1 0.026 typ. 0.66 E1 0.050 1.27 F1 0.028 R 0.72 R G1 0.180 4.57 H1 0.100 2.54 I1 0.050 1.27 J1 0.015 0.38 K1 0.380 9.65

  • The package is not hermetically sealed.
  • The sides are intentionally left open to permit cleani ng material to freely flow in the package, thus minimizing the accumulation of contaminants during cleaning processes.
  • The internal part of the package must be thoroughly dry before operating. PE33 Pad PE37 Pad Function Note 2 1 Output Enable/Disable When this pad is not connected the oscillator shall operate. When this pad is <0.30 volts, the output will be at a steady, non switching state. Recommend connecting this pad to VCC if the oscillator is to be always on. 1 2 No connect There is no internal connection to this pad

3 Ground (GND)

4 Output The outputs must be terminated, 100 ohms between the outputs is the ideal

termination. When the device is disabled, the Output will be an active logic low and the Output* will be an active logic high. The outputs can not be “wire-ORed” with other oscillators or signal generators

5 Output*

6 Supply Voltage

CC) Recommend connecting appropriate power supply bypass capacitors as close as possible.

PE3XB Series 3.3 V PECL Clock Oscillators Jan uary 2008 www.pletronics.com 425-776-1880 7 245°C Maximum

10 Seconds Maximum

Allowed rate of temperature change Maximum 4°C per second Approximately 50 Seconds 215°C±10°C 120 to 160 Seconds 250 200 150 100Temperature (°C) 175°C±10°C Reflow Cycle (typical for lead free processing) The part may be reflowed 2 times without degradation. Tape and Reel: available for quantities of 250 to 1000 per reel Constant Dimensions Table 1 Tape Size D0 D1 Min E1 P0 P2 S1 Min T Max Max 8mm 1.5 +0.1 -0.0 1.0 1.75 +_0.1 4.0 +_0.1 2.0 +_0.05 0.6 0.6 0.1 12mm 1.5 16mm 1.5 2.0 +_0.1 24mm 1.5 Variable Dimensions Table 2 Tape Size Max E2 Min F P1 T2 Max W Max Ao, Bo & Ko Note 1: Embossed cavity to conform to EIA-481-B Dimensions in mm Not to scale REEL DIMENSIONS A inches 7.0 10.0 13.0 mm 177.8 254.0 330.2 B inches 2.50 4.00 3.75 mm 63.5 101.6 95.3 Tape Width D mm --- --- 24.4 +2.0 -0.0 24.0 Reel dimensions may vary from the above

PE3XB Series 3.3 V PECL Clock Oscillators Jan uary 2008 www.pletronics.com 425-776-1880 8 IMPORTANT NOTICE Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and other changes to this product at anytime. PLE reserves the right to discontinue any product or service without notice. Customers are responsible for obtaining the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to PLE’s terms and conditions of sale supplied at the time of order acknowledgment. PLE warrants performance of this product to the specifications applicable at the time of sale in accordance with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE deems necessary to support this warranty. Except where mandated by specific contractual documents, testing of all parameters of each product is not necessarily performed. PLE assumes no liability for application assistance or customer product design. Customers are responsible for their products and applications using PLE components. To minimize the risks associated with the customer products and applications, customers should provide adequate design and operating safeguards. PLE products are not designed, intended, authorized or warranted to be suitable for use in life support applications, devices or systems or other critical applications that may involve potential risks of death, personal injury or severe property or environmental damage. Inclusion of PLE products in such applications is understood to be fully at the risk of the customer. Use of PLE products in such applications requires the written approval of an appropriate PLE officer. Questions concerning potential risk applications should be directed to PLE. PLE does not warrant or represent that any license, either express or implied, is granted under any PLE patent right, copyright, artwork or other intellectual property right relating to any combination, machine or process which PLE product or services are used. Information published by PLE regarding third-party products or services does not constitute a license from PLE to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from PLE under the patents or other intellectual property of PLE. Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is without alteration and is accompanied by associated warranties, conditions, limitations and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not responsible or liable for such altered documents. Resale of PLE products or services with statements different from or beyond the parameters stated by PLE for that product or service voids all express and implied warranties for the associated PLE product or service and is an unfair or deceptive business practice. PLE is not responsible for any such statements. Contacting Pletronics Inc. Pletronics Inc. Tel: 425-776-1880 19013 36 th Ave. West Fax: 425-776-2760 Lynnwood, WA 98036-5761 USA E-mail: ple-sales@pletronics.com URL: www.pletronics.com Copyright © 2005, 2006, 2007, 2008 Pletronics Inc.