PE175BF PERKINELMER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

www.perkinelmer.com/opto PE175BF and PE175BUV CERMAX® XENON ARC LAMPS DATASHEET Lighting Imaging Telecom Cermax® Xenon Arc Lamps

Applications

  • Medical and industrial fiber optic illu- minators
  • Machine vision
  • Infrared and visible spotlights/beacons
  • Spectroscopy
  • Microscopy
  • UV Curing
  • Video projection

Description

The Cermax® xenon arc lamp is an innova- tive lamp design in the specialty lighting industry. These lamps were introduced in the early 1980’s and are now used in endo- scopes in most major hospitals worldwide, in high brightness projection display sys- tems, and for a wide variety of other high performance applications. The PE175BF and PE175BUV Cermax® lamps have an integrated parabolic reflector, enabling high intensity, focused output of ultraviolet, visible, and infrared radiation. With their internal reflector and rugged ceramic body construction, Cermax® lamps are the safest and most compact alternative to conventional quartz xenon lamps. This makes them ideal for applications that require a high degree of illumination control. Current-regulated or power-regulated power supplies with output ripples of less than 5% are recommended. Single shot ignition pulses are advised because radio frequency starters may damage the lamps internal reflector. In addition to lamps, PerkinElmer Optoelectronics manufactures Cermax® arc lamp power supplies, lamp holders, OEM lighting systems, and fiber optic light sources.

PerkinElmer welcomes inquiries about special lamps. We would be pleased to discuss the requirements of your application and th e feasibility of designing a lamp specifically suited to your needs. For more information e-mail us at opto@perkinelmer.com or visit our web site at www.perkinelmer.com/opto. All values are nominal; specifications subject to change without notice. © 2000 PerkinElmer inc. All rights reserved. www.perkinelmer.com/opto USA: PerkinElmer Optoelectronics 44370 Christy St. Fremont, CA 94538 Phone: (510) 979-6500 Fax: (510) 687-1140 Toll Free: (800) 775-6786 Europe: PerkinElmer Optoelectronics GmbH Wenzel-Jaksch-Str. 31

65199 Wiesbaden

Phone: +49 611 492 0 Fax: +49 611 492 369 Asia: PerkinElmer Optoelectronics

47 Ayer Rajah Crescent #06-12

Phone: +65 775 2022 Fax: +65 775 1008 Operational Specifications Output at Nominal Power PE175BF and PE175BUV Physical Specifications Description Specification Arc Gap .045 inch (1.14mm) Reflector Geometry Parabolic Y 2 = 0.5 X (inch) Weight 131 grams Window Diameter 1 inch (25.4 mm) Focused Output at F/1.0 Lens Description Visible Output Total Output* 6mm aperture 1400 Lumens 13 watts 8mm aperture 830 Lumens 7.8 watts * Nominal values at 175 watts after 2 hour burn-in.F= UV Filtered Output/ UV = UV Enhanced Output Radiant Output* UV Output* IR Output* Visible Output* Color Temperature Peak Instabilities Beam Geometry** *These values indicate total output in all directions. Wavelengths = UV<390nm, IR>770nm, Visible 390nm to 770nm. ** Beam Geometry defined as half angle at 10% PTS after 01/100/1000 hours. Notes 1. Lamp must not be operated with window facing upwards within 45º of vertical. 2. Seal temperature must not exceed 150º C. 3. Current/power regulated power supplies and PerkinElmer lamp housing units are recommended. 4. Lamp must be operated within recommended current and power range. Over powering may lead to arc instability, hard starting and premature aging. 5. Hot mirror assembly is available for IR filtering. 6. CERMAX lamps are much safer lamps to use than their quartz xenon arc lamp equivalents. However, caution must be practiced when operating lamps because they are under high pressure, require high voltage, reach temperatures up to 200º C, and their IR and UV radiation can cause skin burns and eye damage. Read hazard sheet included with each lamp shipment. Dimensions Dimensions in parentheses are in millimeters. X Y Focal Point Cathode .125 (3.18) .066 (1.52) .035 (.899) 1.298 (32.96) 2 x .40 (10.2) 1.667 42.34 6-32 UNC 2B x .156 DP

3 Holes EQ SP on A

.750 (19.05) BC .164 (4.19) 1.00 (25.4).250 (6.35) .250 (6.35) 1.000 (25.4) PE175BUV 330x103 candelas 25 watts 3.5 watts 13 watts

2000 Lumens

5050 Kelvin

4.5º/5º/6º PE175BF 350x103 candelas 25 watts 1.2 watts 14 watts

2200 Lumens

5600 Kelvin

4.5º/5º/6º Range 150-200 watts 12-16 amps (DC) 11-14 volts (DC) Nominal 175 watts 14 amps (DC) 12.5 volts (DC) Ignition Voltage 23 kilovolts (recommended minimum) Temperature 150º C (maximum) Lifetime* 1000 hours (500 hour warranty) * End of lamp life is defined as 50% of initial output. Spectral Output RELATIVE OUTPUT F UV F + HOT MIRROR WAVELENGTH (NM) 200 300 400 500 600 700 800 900 1000 1100 100 DS-155 Rev C 1101