PDW06089 JOHANSONMANUFACTURING | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 5
Technical content
6 - 18GHz 4-way Wilkinson Power Divider PDW06089 www.knowlescapacitors.com 2777 Route 20 East, Cazenovia, NY 13035| Ph.: (315)655-8710 To Order Contact KCCSales@knowles.com | For Technical Inquiries Contact DLIengineering@knowles.com March 2024
DESCRIPTION
DLI’s 6 -18 GHz 4 -way power divider / combiner offers unmatched size and performance in a surface mount configuration. This power divider utilizes DLI’s low loss temperature stable materials which offer small size and minimal performance variation over temperature.
FEATURES
- Small Size
- Frequency Stable over Temperature
- Solder Surface Mount Package
- Excellent Repeatability
- Moisture Sensitivity Level: MSL1
- Operating & Storage Temp: -55˚C to +125˚C
- Characteristic Impedance: 50Ω Packaging and Ordering Information: To request tape and reel packaging, please order part number PDW06089 -T, see page 5. SPECIFICATIONS* *Electrical specifications based on typical mounted performance at room temperature. Insertion loss shall vary ±0.5dB over temperature. Power rating assumes the component will be mounted to a PCB with good thermally conducting ground via’s as outlined in the recommended PCB layout that are connected to an adequate heat sink. Max power is based on 85°C base temperature. *Power rating as a combiner assumes that the incoming signals are of equal amplitude and phase. Parameter Frequency Range (GHz) Min Typ. Max Nominal Power Splitting (dB) 6.0 Nominal Phase Shift (Deg) 0.0 Excess Insertion Loss (dB) 1 Return Loss (dB) 14 Amplitude Balance (dB) ± 0.5 Phase Balance (Deg) ± 3.0 Isolation (dB) 14 Max CW Input Power as Divider (W) Max CW Input Power as Com- biner (W) 1.8 *** Size (L x W x H) 0.300 x 0.250 x 0.020 in. 7.62 x 6.35 x 0.508 mm 6 - 18 Information in this document is for informational and guideline purposes only. All information regarding the Product described in this datasheet is subject to change from time to time at Knowles Precision Devices ’ sole discretion. It is the customer’s sole responsibility to evaluate the suitability of the Product in the customer ’s particular application. Knowles Precision Devices assumes no responsibility or liability for the use of the information contained within.
6 - 18GHz 4-way Wilkinson Power Divider PDW06089 www.knowlescapacitors.com 2777 Route 20 East, Cazenovia, NY 13035| Ph.: (315)655-8710 To Order Contact KCCSales@knowles.com | For Technical Inquiries Contact DLIengineering@knowles.com March 2024 Typical Measured Performance *Typical de-embedded measured performance mounted on a connectorized test fixture. DEB is 0.010 in. RO4350B with 50.0Ohm CPW ground traces going into the ports at room temperature.
6 - 18GHz 4-way Wilkinson Power Divider PDW06089 www.knowlescapacitors.com 2777 Route 20 East, Cazenovia, NY 13035| Ph.: (315)655-8710 To Order Contact KCCSales@knowles.com | For Technical Inquiries Contact DLIengineering@knowles.com March 2024 Physical Dimensions Units = Inches Tolerances: For values with 3 decimal places ±0.001 For values with 4 decimal places ±0.0005 Notes : 1. Termination Finish: ENIG: 3 - 6 μinch Au over 50 μinch Ni 2. Maximum Assembly Process Temperature: 250°C Detail View of I/O
6 - 18GHz 4-way Wilkinson Power Divider PDW06089 www.knowlescapacitors.com 2777 Route 20 East, Cazenovia, NY 13035| Ph.: (315)655-8710 To Order Contact KCCSales@knowles.com | For Technical Inquiries Contact DLIengineering@knowles.com March 2024 Recommended PCB Layout Note :
- 50Ω trace dimensions are application specific.
- Ensure adequate grounding beneath the part. Units = Inches For further details and best practices, reference the Microwave Products Guide, available at: https://www.knowlescapacitors.com/Support/Catalogs
6 - 18GHz 4-way Wilkinson Power Divider PDW06089 www.knowlescapacitors.com 2777 Route 20 East, Cazenovia, NY 13035| Ph.: (315)655-8710 To Order Contact KCCSales@knowles.com | For Technical Inquiries Contact DLIengineering@knowles.com March 2024