B393KD0S JOHANSONMANUFACTURING | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 5
Technical content
www.knowlescapacitors.com 39.3GHz Surface Mount Bandpass Filter B393KD0S 2777 Route 20 East, Cazenovia, NY 13035| Ph.: (315)655-8710 To Order Contact KCCSales@knowles.com | For Technical Inquiries Contact DLIengineering@knowles.com December 2024
DESCRIPTION
DLI’s surface mount bandpass filters utilize DLI’s low loss temperature stable materials which offer small size and minimal performance variation over temperature. The catalog BPF ’s are offered in a variety of frequency bands, which offers a drop in solution with highly repeatable performance.
FEATURES
- Small Size
- Surface Mount Package
- Moisture Sensitivity Level: MSL1
- Frequency Stable over Temperature
- Operating & Storage Temp: -55˚C to +125˚C
- 50Ω Characteristic Impedance Packaging and Ordering Information: To request tape and reel packaging, please order part number B393KD0S -T, see additional data on page 5. SPECIFICATIONS* Parameter Frequency Range (GHz) Min Typ. Max Insertion Loss (dB) 38.6 - 40.0 2.0 2.5 Return Loss (dB) 10 12 Low Side Rejection (dB) DC - 36.0 40 45 High Side Rejection (dB) 45.0 - 55.0 40 45 CW Input Power** (W) 3 Size (L x W x H) 0.275 X 0.080 X 0.070 in 6.99 X 2.03 X 1.78 mm Information in this document is for informational and guideline purposes only. All information regarding the Product described in this datasheet is subject to change from time to time at Knowles Precision Devices’ sole discretion. It is the customer’s sole responsibility to evaluate the suita- bility of the Product in the customer’s particular application. Knowles Precision Devices assumes no responsibility or liability for the use of the information contained within. *Electrical specifications based on typical probed performance at room temperature. Insertion loss shall vary ±0.5dB over temperature. **Power rating assumes the component will be mounted to a PCB with good thermally conducting ground vias as outlined in the recommended PCB layout that are connected to an adequate heat sink. Max power is based on 125°C base temperature.
www.knowlescapacitors.com 39.3GHz Surface Mount Bandpass Filter B393KD0S 2777 Route 20 East, Cazenovia, NY 13035| Ph.: (315)655-8710 To Order Contact KCCSales@knowles.com | For Technical Inquiries Contact DLIengineering@knowles.com December 2024 Typical Measured Performance *Typical de-embedded measured performance mounted on a connectorized test fixture. DEB is 0.010in RO4350B with 50.0Ohm CPW ground traces going into the ports at room temperature.
www.knowlescapacitors.com 39.3GHz Surface Mount Bandpass Filter B393KD0S 2777 Route 20 East, Cazenovia, NY 13035| Ph.: (315)655-8710 To Order Contact KCCSales@knowles.com | For Technical Inquiries Contact DLIengineering@knowles.com December 2024 Physical Dimensions Units = inches (in) Tolerances: For values with 3 decimal places ±0.001 For values with 4 decimal places ±0.0005 Notes : 1. Termination Finish: ENIG: 3 - 6 μinch Au over 50 μinch Ni 2. Maximum Assembly Process Temperature: 250°C Top View Bottom View Side View End View
www.knowlescapacitors.com 39.3GHz Surface Mount Bandpass Filter B393KD0S 2777 Route 20 East, Cazenovia, NY 13035| Ph.: (315)655-8710 To Order Contact KCCSales@knowles.com | For Technical Inquiries Contact DLIengineering@knowles.com December 2024 Units: mils For further details and best practices, reference the Microwave Products Guide, available at: https://www.knowlescapacitors.com/Support/Catalogs Recommended PCB Layout
www.knowlescapacitors.com 39.3GHz Surface Mount Bandpass Filter B393KD0S 2777 Route 20 East, Cazenovia, NY 13035| Ph.: (315)655-8710 To Order Contact KCCSales@knowles.com | For Technical Inquiries Contact DLIengineering@knowles.com December 2024