PDTA114T

PDTA114T_SER NEXPERIA | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 12

Technical content

Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic and PowerMOS semiconductors with its focus on the automotive, industrial, computing, consumer and wearable application markets In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below. use http://www.nexperia.com salesaddresses@nexperia.com (email) Replace the copyright notice at the bottom of each page or elsewhere in the document, depending on the version, as shown below: reserved Should be replaced with: - © Nexperia B.V. (year). All rights reserved. If you have any questions related to the data sheet, please contact our nearest sales office via e -mail or telephone (details via salesaddresses@nexperia.com). Thank you for your cooperation and understanding, Kind regards, Team Nexperia

1.1 General description

PNP Resistor-Equipped Transistors (RET) family in small plastic packages. [1] Also available in SOT54A and SOT54 variant packages (seeSection2).

1.2 Features

1.3 Applications

1.4 Quick reference data

Table 1. Product overview Table 2. Quick reference data

PDTA114T_SER_7 © NXP B.V. 2007. All rights reserved. Table 3. Pinning

3 GND (emitter)

2 GND (emitter)

PDTA114T_SER_7 © NXP B.V. 2007. All rights reserved. [1] Also available in SOT54A and SOT54 variant packages (seeSection2 andSection9). Table 4. Ordering information Table 5. Marking codes

PDTA114T_SER_7 © NXP B.V. 2007. All rights reserved. [2] Reflow soldering is the only recommended soldering method. [3] Device mounted on an FR4 PCB with 60µm copper strip line, standard footprint. [1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. [2] Reflow soldering is the only recommended soldering method. [3] Device mounted on an FR4 PCB with 60µm copper strip line, standard footprint. Table 6. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Table 7. Thermal characteristics

PDTA114T_SER_7 © NXP B.V. 2007. All rights reserved. Table 8. Characteristics Tamb =2 5°C unless otherwise specified.

PDTA114T_SER_7 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 07 — 20 April 2007 6 of 11 NXP Semiconductors PDTA114T series PNP resistor-equipped transistors; R1 = 10 kΩ , R2 = open 8. Package outline Fig 3. Package outline SOT416 (SC-75) Fig 4. Package outline SOT346 (SC-59A/TO-236) Fig 5. Package outline SOT883 (SC-101) Fig 6. Package outline SOT54 (SC-43A/TO-92) Fig 7. Package outline SOT54A Fig 8. Package outline SOT54 variant 04-11-04Dimensions in mm 0.95 0.60 1.8 1.4 1.75 1.45 0.9 0.7 0.25 0.10 0.30 0.15 3 0.45 0.15 04-11-11Dimensions in mm 3.0 2.5 1.7 1.3 0.26 0.10 1.9 0.50 0.35 1.3 1.0 3.1 2.7 0.6 0.2 03-04-03Dimensions in mm 0.62 0.55 0.55 0.47 0.50 0.46 0.65 0.20 0.12 0.30 0.22 0.30 0.22 1.02 0.95 0.35 04-11-16Dimensions in mm 5.2 5.0 14.5 12.7 4.8 4.4 4.2 3.6 0.45 0.38 0.48 0.40 1.27 2.54 04-06-28Dimensions in mm 5.2 5.0 14.5 12.7 4.8 4.4 4.2 3.6 0.45 0.38 0.48 0.40 2.54 5.08 3 max 05-01-10Dimensions in mm 5.2 5.0 14.5 12.7 4.8 4.4 4.2 3.6 0.45 0.38 0.48 0.40 1.27 1.27 2.54 2.5 max

PDTA114T_SER_7 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 07 — 20 April 2007 7 of 11 NXP Semiconductors PDTA114T series PNP resistor-equipped transistors; R1 = 10 kΩ , R2 = open Fig 9. Package outline SOT23 (TO-236AB) Fig 10. Package outline SOT323 (SC-70) 04-11-04Dimensions in mm 0.45 0.15 1.9 1.1 0.9 3.0 2.8 2.5 2.1 1.4 1.2 0.48 0.38 0.15 0.09 04-11-04Dimensions in mm 0.45 0.15 1.1 0.8 2.2 1.8 2.2 2.0 1.35 1.15 1.3 0.4 0.3 0.25 0.10

PDTA114T_SER_7 © NXP B.V. 2007. All rights reserved. [1] For further information and the availability of packing methods, seeSection12. Table 9. Packing methods

PDTA114T_SER_7 © NXP B.V. 2007. All rights reserved. Table 10. Revision history

• The format of this data sheet has been redesigned to comply with the new identity guidelines of NXP Semiconductors.
• Legal texts have been adapted to the new company name where appropriate.
• Type number PDTA114TEF removed
• Section 1.2 “Features”: amended
• Section 1.3 “Applications”: amended
• Table 4 “Ordering information”: added
• Table 5 “Marking codes”: enhanced table note section
• Table 6 “Limiting values”: ICM peak collector current conditions added
• Figure1,2,7 and8: added
• Figure3,4,5,6,9 and10: superseded by minimized package outline drawings
• Section 9 “Packing information”: added
• Section 11 “Legal information”: updated PDTA114T_SERIES_6 20040802 Product specification - PDTA114T_SERIES_5 PDTA114T_SERIES_5 20030909 Product specification - PDTA114T_SERIES_4 PDTA114T_SERIES_4 20030410 Product specification - PDTA114TE_2 PDTA114TK_3 PDTA114TS_2 PDTA114TT_3 PDTA114TU_3 PDTA114TE_2 19980723 Preliminary specification - PDTA114TE_1 PDTA114TK_3 19980515 Product specification - PDTA114TK_2 PDTA114TS_2 19980515 Product specification - PDTA114TS_1 PDTA114TT_3 19990413 Objective specification - PDTA114TT_2 PDTA114TU_3 19990413 Product specification - PDTA114TU_2

PDTA114T_SER_7 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 07 — 20 April 2007 10 of 11 NXP Semiconductors PDTA114T series PNP resistor-equipped transistors; R1 = 10 kΩ , R2 = open 11. Legal information

11.1 Data sheet status

[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com.

11.2 Definitions

Draft —The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet —A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail.

11.3 Disclaimers

General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes —NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use —NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of a NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications —Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values —Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale —NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms , including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license —Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights.

11.4 Trademarks

Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 12. Contact information For additional information, please visit:http://www.nxp.com For sales office addresses, send an email to:salesaddresses@nxp.com Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.

NXP Semiconductors PDTA114T series PNP resistor-equipped transistors; R1 = 10 kΩ , R2 = open © NXP B.V. 2007. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 20 April 2007 Document identifier: PDTA114T_SER_7 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. 13. Contents