PDTC114E_SER NEXPERIA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 17
Technical content
1.1 General description
1.2 Features and benefits
1.3 Applications
1.4 Quick reference data
Table 1. Product overview Table 2. Quick reference data
PDTC114E_SER All information provided in this document is subject to legal disclaimers. [1] * = placeholder for manufacturing site code. Table 3. Pinning
2 GND (emitter)
Table 4. Ordering information Table 5. Marking codes
PDTC114E_SER All information provided in this document is subject to legal disclaimers. [2] Reflow soldering is the only recommended soldering method. [3] Device mounted on an FR4 PCB with 70 m copper strip line, standard footprint. Table 6. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134).
PDTC114E_SER All information provided in this document is subject to legal disclaimers. [1] Device mounted on an FR4 PCB, single-si ded copper, tin-plated and standard footprint. [2] Reflow soldering is the only recommended soldering method. [3] Device mounted on an FR4 PCB with 70 m copper strip line, standard footprint. Table 7. Thermal characteristics
© Nexperia B.V. 2017. All rights reserved PDTC114E_SER All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 12 — 21 December 2011 5 of 17 Nexperia PDTC114E series NPN resistor-equipped transistors; R1 = 10 k, R2 = 10 k FR4 PCB, standard footprint Fig 2. Transient thermal impedance from junction to ambient as a function of pulse duration for PDTC114EE (SOT416); typical values FR4 PCB, 70 m copper strip line Fig 3. Transient thermal impedance from junction to ambient as a function of pulse duration for PDTC114EM (SOT883); typical values 006aac781 10-5 1010-210-4 10210-1 tp (s) 10-3 1031 102 103 Zth(j-a) (K/W) duty cycle = 1 0.75 0.5 0.33 0.2 0.1 0.05 0.02 0.01 006aac782 10-5 1010-210-4 10210-1 tp (s) 10-3 1031 102 103 Zth(j-a) (K/W) duty cycle = 1 0.75 0.5 0.33 0.2 0.1 0.05 0.02 0.01
© Nexperia B.V. 2017. All rights reserved PDTC114E_SER All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 12 — 21 December 2011 6 of 17 Nexperia PDTC114E series NPN resistor-equipped transistors; R1 = 10 k, R2 = 10 k FR4 PCB, standard footprint Fig 4. Transient thermal impedance from junction to ambient as a function of pulse duration for PDTC114ET (SOT23); typical values FR4 PCB, standard footprint Fig 5. Transient thermal impedance from junction to ambient as a function of pulse duration for PDTC114EU (SOT323); typical values 006aac779 10-5 1010-210-4 10210-1 tp (s) 10-3 1031 102 103 Zth(j-a) (K/W) duty cycle = 1 0.75 0.5 0.33 0.2 0.1 0.05 0.02 0.01 006aac780 10-5 1010-210-4 10210-1 tp (s) 10-3 1031 102 103 Zth(j-a) (K/W) duty cycle = 1 0.75 0.5 0.33 0.2 0.1 0.05 0.02 0.01
PDTC114E_SER All information provided in this document is subject to legal disclaimers. [1] Characteristics of built-in transistor. Table 8. Characteristics Tamb =2 5 C unless otherwise specified.
© Nexperia B.V. 2017. All rights reserved PDTC114E_SER All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 12 — 21 December 2011 8 of 17 Nexperia PDTC114E series NPN resistor-equipped transistors; R1 = 10 k, R2 = 10 k VCE =5V (1) T amb = 100 C (2) T amb =2 5 C (3) T amb = 40 C IC/IB =2 0 (1) T amb = 100 C (2) T amb =2 5 C (3) T amb = 40 C Fig 6. DC current gain as a function of collector current; typical values Fig 7. Collector-emitter saturation voltage as a function of collector current; typical values VCE =0 . 3V (1) T amb = 40 C (2) T amb =2 5 C (3) T amb = 100 C VCE =5V (1) T amb = 40 C (2) T amb =2 5 C (3) T amb = 100 C Fig 8. On-state input voltage as a function of collector current; typical values Fig 9. Off-state input volt age as a function of collector current; typical values IC (mA) 10-1 102101 006aac768 102 103 hFE (1) (2) (3) IC (mA) 11 0 210 006aac769 10-1 VCEsat (V) 10-2 (1) (2) (3) 006aac770 IC (mA) 10-1 102101 VI(on) (V) 10-1 (1) (2) (3) IC (mA) 10-1 101 006aac771 VI(off) (V) 10-1 (1) (2) (3)
© Nexperia B.V. 2017. All rights reserved PDTC114E_SER All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 12 — 21 December 2011 9 of 17 Nexperia PDTC114E series NPN resistor-equipped transistors; R1 = 10 k, R2 = 10 k 8. Test information
8.1 Quality information
This product has been qualified in accordance with the Automotive Electronics Council (AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is suitable for use in automotive applications. f=1M H z ; Tamb =2 5 CV CE =5V ; Tamb =2 5 C Fig 10. Collector capacitance as a function of collector-base voltage; typical values Fig 11. Transition frequency as a function of collector current; typical values of built-in transistor VCB (V) 05 0 4020 3010 006aac772 C c (pF) 006aac757 IC (mA) 10-1 102101 102 103 fT (MHz)
PDTC114E_SER All information provided in this document is subject to legal disclaimers. [1] For further information and the availability of packing methods, see Section 14. Table 9. Packing methods
© Nexperia B.V. 2017. All rights reserved PDTC114E_SER All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 12 — 21 December 2011 11 of 17 Nexperia PDTC114E series NPN resistor-equipped transistors; R1 = 10 k, R2 = 10 k 11. Soldering Reflow soldering is the only recommended soldering method. Fig 16. Reflow soldering footprint PDTC114EE (SOT416/SC-75) Reflow soldering is the only recommended soldering method. Fig 17. Reflow soldering footprint PDTC114EM (SOT883/SC-101) solder lands solder resist occupied area solder paste sot416_fr 0.85 1.7 2.2 0.5 (3×) 0.6 (3×) 1.3 Dimensions in mm solder lands solder resist occupied area solder paste sot883_fr 1.3 0.3 0.6 0.7 0.4 0.9 0.3 (2×) 0.4 (2×) 0.25 (2×) R0.05 (12×)0.7 Dimensions in mm
© Nexperia B.V. 2017. All rights reserved PDTC114E_SER All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 12 — 21 December 2011 12 of 17 Nexperia PDTC114E series NPN resistor-equipped transistors; R1 = 10 k, R2 = 10 k Fig 18. Reflow soldering footprint PDTC114ET (SOT23) Fig 19. Wave soldering footprint PDTC114ET (SOT23) solder lands solder resist occupied area solder paste sot023_fr 0.5 (3×) 0.6 (3×) 0.6 (3×) 0.7 (3×) 3.3 2.9 1.7 1.9 Dimensions in mm solder lands solder resist occupied area preferred transport direction during soldering sot023_fw 2.8 4.5 1.4 4.6 1.4 (2×) 1.2 (2×) 2.2 2.6 Dimensions in mm
© Nexperia B.V. 2017. All rights reserved PDTC114E_SER All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 12 — 21 December 2011 13 of 17 Nexperia PDTC114E series NPN resistor-equipped transistors; R1 = 10 k, R2 = 10 k Fig 20. Reflow soldering footprint PDTC114EU (SOT323/SC-70) Fig 21. Wave soldering footprint PDTC114EU (SOT323/SC-70) solder lands solder resist occupied area solder paste sot323_fr 2.65 2.35 0.6 (3×) 0.5 (3×) 0.55 (3×) 1.325 1.85 1.33 Dimensions in mm sot323_fw 3.65 2.1 1.425 (3×) 4.6 (2×) 2.575 1.8 solder lands solder resist occupied area preferred transport direction during soldering Dimensions in mm
PDTC114E_SER All information provided in this document is subject to legal disclaimers. Table 10. Revision history
© Nexperia B.V. 2017. All rights reserved PDTC114E_SER All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 12 — 21 December 2011 15 of 17 Nexperia PDTC114E series NPN resistor-equipped transistors; R1 = 10 k, R2 = 10 k 13. Legal information
13.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nexperia.com .
13.2 Definitions
Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request vi a the local Nexperia sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between Nexperia and its customer , unless Nexperia and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the Nexperia product is deemed to offer functions and qualities beyond those described in the Product data sheet.
13.3 Disclaimers
Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Nexperia takes no responsibility for the content in this document if provided by an information source outside of Nexperia. In no event shall Nexperia be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, Nexperia’s aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of Nexperia. Right to make changes — Nexperia reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — Nexperia products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of a Nexperia product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Nexperia and its suppliers accept no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purpos es only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using Nexperia products, and Nexperia accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the Nexperia product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. Nexperia does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using Nexperia products in order to av oid a default of the applications and the products or of the application or use by customer’s third party customer(s). Nexperia does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — Nexperia products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nexperia.com/profile/terms , unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. Nexperia hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of Nexperia products by customer. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.
© Nexperia B.V. 2017. All rights reserved PDTC114E_SER All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 12 — 21 December 2011 16 of 17 Nexperia PDTC114E series NPN resistor-equipped transistors; R1 = 10 k, R2 = 10 k Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding.
13.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 14. Contact information For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com
NPN resistor-equipped transistors; R1 = 10 k, R2 = 10 k 15. Contents © Nexperia B.V. 2017. All rights reserved For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: