DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
Features
- Low power consumption
- RoHS Compliant
- Gray Face, White Segments or Black Face, White Segments
- Easy mounting on PCB or socket Mechanical Dimensions Notes: 1. Dimensions in millimeters [inch], and tolerance is ±0.25 [.010] unless otherwise noted. 2. Bending ≤ Length*1% 4. Specifications subject to change without notice
www.p-tec.net 103013 Rev1 MS Page 2 of 8 Device Selection Guide Model Number Chip Note Common Anode Common Cathode Material Emitting Color Add “-BW” to end of part number for Black Face, White Segment version PDC56A-CADB01 PDC56A-CCDB01 InGaN Blue Absolute Maximum Ratings at Ta=25℃ Parameter Symbol Rating Unit Power Dissipation per Dice PAD 114 mW Derating Liner from 25℃ per Dice -- 0.4 mA/℃ Continuous Forward Current Per Dice IAF 30 mA Peak Current Per Dice (duty cycle 1/10, 1KHz) IPF 100 mA Reverse Voltage Per Dice VR 5 V Electrostatic Discharge (HBM) ESD 1000 V Operating Temperature Topr -35~+85 ℃ Storage Temperature Tstg -35~+85 ℃ Solder Conditions: 1/16 inch below seating plane for 3 -5 seconds at 260℃. Electrical and Optical Characteristics at Ta=25℃ Parameter Symbol Min. Typ. Max. Unit Condition Forward Voltage Per Segment VF -- 3.2 3.8 V IF=20mA Luminous Intensity Per Segment Iv -- 27 -- mcd IF=10mA Dominant Wavelength λd -- 465 -- nm IF=20mA Reverse Current IR -- -- 50 μA VR=5V Luminous Intensity Matching Ratio Iv-m -- -- 2:1 -- IF=10mA
www.p-tec.net 103013 Rev1 MS Page 3 of 8 Luminous General lv Bin Grade (IF=10mA) Color Rank Limits (IF=20mA)
www.p-tec.net 103013 Rev1 MS Page 4 of 8 All Light-On Segments Feature & Pad Position Internal Circuit Diagram Common Anode Common Cathode
www.p-tec.net 103013 Rev1 MS Page 5 of 8 Typical Electrical / Optical Characteristic Curves
- (Ta = 25℃ Unless Otherwise Noted)
www.p-tec.net 103013 Rev1 MS Page 6 of 8 Precautions for Use 1. Recommended soldering conditions a. Wave soldering profile i. Distance: 1.6mm min (from seating plane) 2. Hand Soldering (Iron Condition): a. Soldering Iron: 30W Max b. Temperature 350C Max c. Soldering Time: 3 Second Max (One Time) d. Distance 1.6mm min (from seating plane)
www.p-tec.net 103013 Rev1 MS Page 7 of 8 Packing Dimensions
www.p-tec.net 103013 Rev1 MS Page 8 of 8 Record Of Revisions Rev. Comments Page Date
0 Released Spec -- 10/30/13
1 Updated Luminous Intensity Per Segment 2 2/3/2017
Approved Part Number Approved By Prepared By